1887
Volume 62, Issue 6
  • E-ISSN: 1365-2478

Abstract

ABSTRACT

Ultrasonic (500 kHz) P‐ and S‐wave velocity and attenuation anisotropy were measured in the laboratory on synthetic, octagonal‐shaped, silica‐cemented sandstone samples with aligned penny‐shaped voids as a function of pore fluid viscosity. One control (blank) sample was manufactured without fractures, another sample with a known fracture density (measured from X‐ray CT images). Velocity and attenuation were measured in four directions relative to the bedding fabric (introduced during packing of successive layers of sand grains during sample construction) and the coincident penny‐shaped voids (fractures). Both samples were measured when saturated with air, water (viscosity 1 cP) and glycerin (100 cP) to reveal poro‐visco‐elastic effects on velocity and attenuation, and their anisotropy. The blank sample was used to estimate the background anisotropy of the host rock in the fractured sample; the bedding fabric was found to show transverse isotropy with shear wave splitting (SWS) of 1.45 ± 1.18% (i.e. for S‐wave propagation along the bedding planes). In the fractured rock, maximum velocity and minimum attenuation of P‐waves was seen at 90° to the fracture normal. After correction for the background anisotropy, the fractured sample velocity anisotropy was expressed in terms of Thomsen's weak anisotropy parameters ε, γ & δ. A theory of frequency‐dependent seismic anisotropy in porous, fractured, media was able to predict the observed effect of viscosity and bulk modulus on ε and δ in water‐ and glycerin‐saturated samples, and the higher ε and δ values in air‐saturated samples. Theoretical predictions of fluid independent γ are also in agreement with the laboratory observations. We also observed the predicted polarisation cross‐over in shear‐wave splitting for wave propagation at 45° to the fracture normal as fluid viscosity and bulk modulus increases.

Loading

Article metrics loading...

/content/journals/10.1111/1365-2478.12194
2014-10-20
2024-03-28
Loading full text...

Full text loading...

References

  1. Al‐HarrasiO.H., KendallJ.‐M. and ChapmanM.2011. Fracture characterization using frequency‐dependent shear wave anisotropy analysis of microseismic data. Geophysical Journal International185, 1059–1070.
    [Google Scholar]
  2. BatzleM., HanD.‐H. and HofmannR.2006. Fluid mobility and frequency‐dependent seismic velocity – direct measurements. Geophysics71, N1–N9.
    [Google Scholar]
  3. BestA.I.1992. The prediction of the reservoir properties of sedimentary rocks from seismic measurements . PhD thesis, University of Reading, U.K.
  4. BrownR. and KorringaJ.1975. On the dependence of the elastic properties of a porous rock on the compressibility of the pore fluid. Geophysics40, 608–616.
    [Google Scholar]
  5. ChapmanM.2001. Modelling the wide‐band laboratory response of rock samples to fluid and pressure changes . PhD thesis, University of Edinburgh, U.K.
  6. ChapmanM.2003. Frequency‐dependent anisotropy due to meso‐scale fractures in the presence of equant porosity. Geophysical Prospecting51, 369–379.
    [Google Scholar]
  7. ChapmanM., MaultzschS., LiuE. and LiX.‐Y.2003. The effect of fluid saturation in an anisotropic multi‐scale equant porosity model. Journal of Applied Geophysics54, 191–202.
    [Google Scholar]
  8. ChapmanM., ZatsepinS. and CrampinS.2002. Derivation of a microstructural poroelastic model. Geophysical Journal International151, 427–451.
    [Google Scholar]
  9. ClarkeR.A., BensonP.M. and CarterA.J.2009. Anisotropic P‐wave attenuation measured from a multi‐azimuth surface seismic reflection survey. Geophysical Prospecting57, 835–845.
    [Google Scholar]
  10. CrampinS.1981. A review of wave motion in anisotropic and cracked elastic‐media. Wave Motion3, 343–391.
    [Google Scholar]
  11. DellingerJ. and VernikL.1994. Do traveltimes in pulse‐transmission experiments yield anisotropic group or phase velocities? Geophysics59, 1774–1779.
    [Google Scholar]
  12. EshelbyJ.D.1957. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences241, 376–396.
    [Google Scholar]
  13. GassmannF.1951. Über die Elastizität pröser Medien. Vier. der Natur. Gesellschaft in Zürich96, 1–23.
    [Google Scholar]
  14. HallS. and KendallJ.‐M.2003. Fracture characterization at Valhall: Application of P‐wave amplitude variation with offset and azimuth (AVOA) analysis to a 3D ocean‐bottom data set. Geophysics68, 1150–1160.
    [Google Scholar]
  15. HudsonJ., PointerT. and LiuE.2001. Effective‐medium theories for fluid‐saturated materials with aligned cracks. Geophysical Prospecting49, 509–522.
    [Google Scholar]
  16. HudsonJ.A.1981. Wave speeds and attenuation of elastic waves in material containing cracks. Geophysical Journal of the Royal Astronomical Society64, 133–150.
    [Google Scholar]
  17. MarketosG. and BestA.I.2010. Application of the BISQ model to clay squirt flow in reservoir sandstones. Journal of Geophysical Research115, B06209. doi:10.1029/2009JB006495.
    [Google Scholar]
  18. MaultzschS., ChapmanM., LiuE. and LiX.Y.2003. Modelling frequency‐dependent seismic anisotropy in fluid‐saturated rock with aligned fractures: implications of fracture size estimation from anisotropic measurements. Geophysical Prospecting51, 381–392.
    [Google Scholar]
  19. MaultzschS., ChapmanM., LiuE. and LiX.Y.2007. Modelling and analysis of attenuation anisotropy in multi‐azimuth VSP data from the Clair field. Geophysical Prospecting55, 627–642.
    [Google Scholar]
  20. MaultzschS., NawabR., YuhS., IdreesM. and FrignetB.2009. An integrated multi‐azimuth VSP survey for fracture characterization in the vicinity of a well. Geophysical Prospecting57, 263–274.
    [Google Scholar]
  21. MavkoG., MukerjiT. and DvorkinJ.1998. The Rock Physics Handbook. Cambdridge University Press, Cambridge, U.K.
    [Google Scholar]
  22. McCannC. and SothcottJ.1992. Laboratory measurements of the seismic properties of sedimentary rocks. Geological Applications of Wireline Logs2, 285–297.
    [Google Scholar]
  23. QianZ., ChapmanM., LiX.Y., DaiH.C., LiuE., ZhangY.et al. 2007. Use of multicomponent seismic data for oil‐water discrimination in fractured reservoirs. The Leading Edge26, 1176–1184.
    [Google Scholar]
  24. RathoreJ.S., FjaerE., HoltR.M. and RenlieL.1995. P‐ and S‐wave anisotropy of a synthetic sandstone with controlled crack geometry. Geophysical Prospecting43, 711–728.
    [Google Scholar]
  25. ThomsenL.1986. Weak elastic anisotropy. Geophysics51, 1954–1966.
    [Google Scholar]
  26. ThomsenL.1995. Elastic anisotropy due to aligned cracks in porous rock. Geophysical Prospecting43, 805–829.
    [Google Scholar]
  27. TillotsonP., ChapmanM., BestA.I., SothcottJ., McCannC., ShangxuW.et al. 2011. Observations of fluid‐dependent shear‐wave splitting in synthetic porous rocks with aligned penny‐shaped fractures. Geophysical Prospecting59, 111–119. doi: 10.1111/j.1365‐2478.2010.00903.x.
    [Google Scholar]
  28. TillotsonP., SothcottJ., BestA.I., ChapmanM. and LiX.Y.2012. Experimental verification of the fracture density and shear‐wave splitting relationship using synthetic silica cemented sandstones with a controlled fracture geometry. Geophysical Prospecting60, 516–525.
    [Google Scholar]
  29. van der KolkC.M., GuestW.S. and PottersJ.H.H.M.2001. The 3D shear experiment over the Natih field in Oman: the effect of fracture‐filling fluids on shear propagation. Geophysical Prospecting49, 179–197.
    [Google Scholar]
  30. WillisM.E., BurnsD.R., RamaR., MinsleyB., Nafi ToksözM. and VetriL.2006. Spatial orientation and distribution of reservoir fractures from scattered seismic energy. Geophysics71, 43–51.
    [Google Scholar]
  31. WinklerK. and PlonaT.J.1982. Techniques for measuring ultrasonic velocity and attenuation spectra in rocks under pressure. Journal of Geophysical Research87, 10776–10780.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/1365-2478.12194
Loading
/content/journals/10.1111/1365-2478.12194
Loading

Data & Media loading...

  • Article Type: Research Article
Keyword(s): Anisotropy; Fluid saturation; Fractures

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error