1887
PDF

Abstract

At the Ketzin pilot site for CO2 storage, from 2008 through 2013, 67,000 tons of CO2 were injected into the Triassic Stuttgart Formation, a saline aquifer at 630 m – 650 m depth. For continuous pressure and temperature monitoring over the whole depth range of the wells, a fibre optic cable was deployed in all deep injection and monitoring wells in the annulus outside the production casing. A VSP survey was acquired using a Mertz M12 vibro truck on 23 source points and using the whole length of deployed cable for recording. Seismic waves were recorded over a length of ~5900 m at a trace interval of 1 m. An inspection of the data quality shows that the signal to noise ratio is strongly affected by the coupling conditions of the cable. Within the cemented part of the casing, the coupling is reasonably good, whereas the signal to noise ratio is bad for uncemented intervals. In the lower half of the wells, coupling conditions are good enough to produce high-quality seismic shot gathers. These gathers were used for a 3D imaging of the reservoir complex used for CO2 storage in close vicinity to the injection and monitoring wells.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201700162
2017-03-31
2024-03-29
Loading full text...

Full text loading...

http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201700162
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error