1887

Abstract

Summary

The phenomenon of spontaneous emulsification occurring when crude oil is gently contacted with water was investigated and is presented in this paper. Various crude oils and a model system composed of asphaltenes in toluene have been studied. The latter contributed to simplify the observations and allowed to have a better insight into the underlying mechanism. It was established that the water micro-droplets appear in the oil phase due to an osmotic phenomenon: the molecular water diffuses from the water reservoir and the water micro-droplets swell; at the same time, “osmogenic” species (hydro-soluble asphaltenes in the case of the model system) penetrate in the water micro-droplets increasing the osmotic pressure. The saltier the contacted brine, the more this process is slowed down.

A higher oil recovery has been measured at a microfluidic scale in presence of water micro-droplets whatever the wettability. In a hydrophilic system, the oil recovery is even higher than in the hydrophobic system. Besides, we have noticed that these water micro-droplets do not have a significant impact on the dilatational visco-elasticity; hence, the visco-elasticity and interfacial tension cannot explain the higher recovery. The particular organization of the water micro-droplets suggest an explanation for these observations. We have observed that some water micro-droplets are stuck at the oil/water interface, others nucleate at the oil/solid interface and others sediment on the solid surface. The accumulation of water micro-droplets observed at the oil/water/solid interface suggest a change of contact angle. The sedimentation and nucleation of the water micro-droplets lead to a more hydrophilic surface.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201900179
2019-04-08
2024-04-20
Loading full text...

Full text loading...

References

  1. Bartels, W.-B., Mahani, H., Berg, S., Menezes, R., van der Hoeven, J.A. and Fadili, A
    . [2017] Oil configuration under high salinity and low salinity conditions at pore scale: a parametric investigation by use of a single channel micromodel. Society of Petroleum Engineers Journal, 22(5), 1362–1373.
    [Google Scholar]
  2. Bidhendi, M.M., Garcia-Olvera, G., Morin, B., Oakey, J.S. and Alvarado, V
    . [2018] Interfacial viscoelasticity of crude oil/brine: an alternative Enhanced-Oil-Recovery mechanism in smart waterflooding. Society of Petroleum Engineers Journal, 23(3), 803–818.
    [Google Scholar]
  3. Bochner de Araujo, S., Merola, M., Vlassopoulos, D. and Fuller, G.G
    . [2017] Droplet coalescence and spontaneous emulsification in the presence of asphaltene adsorption. Langmuir, 33(40), 10501–10510.
    [Google Scholar]
  4. Emadi, A. and Sohrabi, M
    . [2013] Visual investigation of oil recovery by low salinity water injection: formation of water micro-dispersions and wettability alteration. SPE Annual Technical Conference and Exhibition, SPE-166435-MS.
    [Google Scholar]
  5. Facanha, J.M.F., Mahzari, P. and M.Sohrabi
    . [2017] Direct observation of low-salinity water effect: relationship between micro-dispersion formation and wettability alteration. SPE Annual Technical Conference and Exhibition, SPE-183695-MS.
    [Google Scholar]
  6. Fossen, M., Kallevik, H., Knudsen, K.D. and Sjöblom, J
    . [2007] Asphaltenes precipitated by a two-step precipitation procedure. 1 Interfacial tension and solvent properties. Energy Fuels, 21(2), 1030–1037.
    [Google Scholar]
  7. Hung, L.H., Lin, R. and Lee, A.P
    . [2008] Rapid microfabrication of solvent-resistant biocompatible microfluidic devices. Lab Chip, 8(6), 983–987.
    [Google Scholar]
  8. Kirchnerová, J and Cave, G.C.B
    . [1976] The solubility of water in low dielectric solvent. Canadian Journal of Chemistry, 54(24), 3909–3916.
    [Google Scholar]
  9. Langevin, D. and Argilier, J.F
    . [2015] Interfacial behavior of asphaltenes. Advances in colloid and interface science, 233, 83–93.
    [Google Scholar]
  10. Lucassen-Reynders, E.H., Cagna, A. and Lucassen, J
    . [2001] Gibbs elasticity, surface dilational modulus and diffusional relaxation in nonionic surfactant monolayers. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 186(1–2), 63–72.
    [Google Scholar]
  11. Mahzari, P. and Sohrabi, M
    . [2015] Impact of micro-dispersion formation on effectiveness of low salinity waterflooding. IOR 2015 - 18th European Symposium on Improved Oil Recovery, Extended Abstracts, B09.
    [Google Scholar]
  12. Morin, B., Liu, Y., Alvarado, V. and Oakey, J
    . [2016] A microfluidic flow focusing platform to screen the evolution of crude oil - brine interfacial elasticity. Lab Chip, 16(16), 3074–3081.
    [Google Scholar]
  13. Passade-Boupat, N., Rondon Gonzalez, M., Hurtevent, C., Brocart, B. and Palermo, T
    . [2012] Risk assessment of calcium naphthenates and separation mechanisms of acidic crude oil. SPE International Conference and Exhibition on Oilfield Scale, SPE-155229-MS.
    [Google Scholar]
  14. Sheu, E. Y
    . [2002] Petroleum asphaltene - properties, characterization, and issues. Energy Fuels, 16(1), 74–82.
    [Google Scholar]
  15. Sun, H.-Q., Zhang, L., Li, Z.-Q., Zhang, L., Luo, L. and Zhao, S
    . [2011] Interfacial dilational rheology related to enhance oil recovery. Soft Matter, 7, 7601–7611.
    [Google Scholar]
  16. Tang, G.Q. and Morrow, N.R
    . [1999] Influence of brine composition and fines migration on crude oil/brine/rock interactions and oil recovery. Journal of Petroleum Science and Engineering, 24(2–4), 99–111.
    [Google Scholar]
  17. Wägli, P., Homsy, A. and de Rooij, N.F
    . [2011] Norlad Optical Adhesive (NOA 81) microchannels with adjustable wetting behavior and high chemical resistance against a range of mid-infrared-transparent organic solvents. Sensors and Actuators B: Chemical, 156(2), 994–1001.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201900179
Loading
/content/papers/10.3997/2214-4609.201900179
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error