@article{eage:/content/journals/10.1002/nsg.12111, author = "Perri, Maria T. and Barone, Ilaria and Cassiani, Giorgio and Deiana, Rita and Binley, Andrew", title = "Borehole effect causing artefacts in cross‐borehole electrical resistivity tomography: A hydraulic fracturing case study", journal= "Near Surface Geophysics", year = "2020", volume = "18", number = "Geoelectrical Monitoring", pages = "445-462", doi = "https://doi.org/10.1002/nsg.12111", url = "https://www.earthdoc.org/content/journals/10.1002/nsg.12111", publisher = "European Association of Geoscientists & Engineers", issn = "1873-0604", type = "Journal Article", keywords = "Cross‐hole methods", keywords = "ERT", keywords = "Tracer test", keywords = "Borehole effect", abstract = "ABSTRACT Electrical resistivity tomography is a technique widely used for the investigation of the structure and fluid dynamics of the shallow subsurface, particularly for hydro‐geophysical purposes, sometimes using cross‐borehole configurations. The results of electrical resistivity tomography inversion and their usefulness in solving hydrogeophysical problems, even though invariably limited by resolution issues, depend strongly on the accuracy of inversion, which in turn depends on a proper estimation and handling of data and model errors. Among model errors, one approximation often applied in cross‐hole electrical resistivity tomography is that of neglecting the effects of boreholes and the fluids therein. Such effects inevitably impact the current and potential patterns as measured by electrodes in the boreholes themselves. In the presence of very saline fluids, in particular, this model approximation may prove inadequate and the tomographic inversion may yield images strongly contaminated by artefacts. In this paper, we present a case study where highly saline water was used for hydraulic fracturing to improve permeability of a shallow formation impacted by hydrocarbon contamination, with the final aim of improving the effectiveness of in situ contaminant oxidation. The hydraulic fracturing was monitored via time‐lapse cross‐hole electrical resistivity tomography. Arrival of the saline water in the monitoring borehole likely caused a strong borehole effect that significantly affected the quality and usefulness of electrical resistivity tomography inversions. In this paper, we analyse the experimental dataset and produce, via three‐dimensional electrical resistivity tomography forward modelling, a viable explanation for the observed, paradoxical field results.", }