1887
ASEG2007 - 19th Geophysical Conference
  • ISSN: 2202-0586
  • E-ISSN:

Abstract

Summary

Over the past 27 years, the AMIRA P223 project series has produced an extensive body of EM modelling and inversion programs used by the minerals, environmental and defence industries for planning and interpreting EM surveys, and for the development of new EM exploration instruments. This project series is now into its final overtime. Historically, the software generated by these projects has been available only to the project sponsors and their designated contractors. All programs are now commercially available through EMIT’s Maxwell graphical user interface. From 2010, the Fortran 90 source code for all programs will be open source. The purpose of this paper is to make the wider EM modelling community aware of the capabilities offered by this extensive, commercially-available software suite. The models for both modelling and inversion include a general 3D full domain finite elements (Loki class), 3D compact finite-elements (Samaya class), 2.5D fulldomain finite-elements (Arjuna class), multiple 3D plates embedded in a multi-layered host (Leroi class) and a 1D layered earth (Airbeo and Beowulf). The programs can be used for any frequency or time-domain airborne, ground or downhole EM system. Sources can include multi-vertex closed loops, grounded wires, magnetic dipoles and plane waves. Receiver types can include multi-vertex loops, grounded wires, and magnetic and electric dipoles. Survey types include the variety of airborne configurations, fixed sources with independent surface or downhole receiver lines, moving sources with multiple fixed-offset receivers and magnetotellurics. Inversion for all model classes is based on an iterative, damped SVD method which concentrates on those parameters that most affect the data whilst ignoring those that are irrelevant.

Loading

Article metrics loading...

/content/journals/10.1071/ASEG2007ab114
2007-12-01
2025-11-15
Loading full text...

Full text loading...

References

  1. Cristall, J. and Brisbin, D, 2006, Geological Sources of VTEM Responses along the Collins Bay Fault, Athabasca Basin: Giant Uranium Deposits Short Course, Prospectors and Developers Association, Toronto.
  2. Ellis, R. G., 1995, Joint 3D EM inversion: presented at International Symposium on 3D Electromagnetics, Ridgefield, CT.
  3. Irons, B.M., 1970, A frontal solution method for finiteelement analysis: International Journal for Numerical Analysis in Engineering, 2, 5-32.
  4. Jupp, D.L.B, and Vozoff, K., 1975, Stable iteative methods for geophysical inversion, Geophysical Journal of the Royal Astronomical Society, 42, 957-976.
  5. McGillivray, P. R., Oldenburg, D. W., Ellis, R. G., and Habashy, T. M., 1994, Calculation of sensitivities for the frequency-domain electromagnetic problem: Geophysical Journal International, 116, 1-4.
  6. Raiche, A., 1998, Modelling the time-domain response of AEM systems: Exploration Geophysics, 29, 103-106.
  7. Raiche, A., 1999, A flow-through Hankel transform technique for rapid, accurate Green’s function formulation: Radio Science, 34, 549-555.
  8. Raiche, A., 2001, Choosing an AEM system to look for kimberlites – a modelling study: Exploration Geophysics, 32, 1-8.
  9. Raiche, A., Sugeng, F., and Xiong, Z., 1996, Modelling complex structures using the thin sheet approximation: presented at 13th Workshop on Electromagnetic Induction in the Earth, Onuma.
  10. Raiche, A.P., Jupp, D.L.B, Rutter, H., and Vozoff, K., 1985, The joint use of coincident loop EM and Schlumberger sounding to resolve layered structures: Geophysics, 50, 1618- 1627.
  11. Sugeng, F., Raiche, A., and Rijo, L., 1993, Comparing the time-domain response of 2D and elongated 3D structures excited by a rectangular source: Journal of Geomagnetism and Geoelectricity, 45, 873-885.
  12. Sugeng, F., and Raiche, A., 2004, Modelling the electromagnetic response in complex geological structures using the 3D finite-element method based on the hexahedral and the tetrahedral edge-element technique: presented at the 17th ASEG Geophysical Conference and Exhibition, Sydney.
  13. Sugeng, F., and Raiche, A., 2006, Fast hybrid forward modelling method for practical 3D inversion of electromagnetic data: presented at the Australian Earth Science Convention, Melbourne.
  14. Weidelt, P., 1981, Dipolinduktion in einer dünnen Platte mit leitfähiger Umgebung und Deckschicht: Report 89727, BGR, Hannover.
  15. Wilson, G., Raiche, A. and Sugeng, F., 2006, 2.5D inversion of airborne electromagnetic data: Exploration Geophysics, 37, 363-371.
  16. Wolfgram, P., and Golden, H., 2001, Airborne EM applied to sulphide nickel - examples and analysis: Exploration Geophysics, 32, 136-140.
  17. Xiong, Z., and Tripp, A. C., 1995, A block iterative algorithm for 3D electromagnetic modelling using integral equations with symmetrized substructures: Geophysics, 60, 291-295.
/content/journals/10.1071/ASEG2007ab114
Loading
  • Article Type: Research Article
Keyword(s): electromagnetics; finite-elements; full domain; inversion; modeling; thin plates
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error