1887
ASEG2007 - 19th Geophysical Conference
  • ISSN: 2202-0586
  • E-ISSN:

Abstract

Summary

In the last five years the minerals exploration industry has placed greater emphasis on the mapping of targets of high conductance. In response to this end user requirement, the VTEM system has been modified to allow the recovery of an enhanced conductance measurement. Field results show this new parameter to have improved sensitivity to targets of high conductance, approximately doubling the performance over the previously available results.

Loading

Article metrics loading...

/content/journals/10.1071/ASEG2007ab166
2007-12-01
2026-01-23
Loading full text...

Full text loading...

References

  1. Gingerich, J., and Allard, M., (2001) Geophysical Techniques for VMS Exploration in Matagami Camp, presentation made at the Prospectors and Developers Association Meeting, March 12, 2001
  2. McNeil, D. (1980) Applications of Transient Electromagnetic Technqiues; Geonics Limited, Technical Note TN-7 October 1980
  3. Smith, R. S., and Annan, P., (2000) Using an induction coil sensor to indirectly measure the B-field response in the bandwidth of the transient electromagnetic method: Geophysics, 65, no.5, 1489-1494.
  4. Witherly, K., Irvine, R., and Morrison, E., (2004), The Geotech VTEM time-domain helicopter EM system: 74th Annual International Meeting, SEG, Expanded Abstracts, 1217-1220.
  5. Witherly, K., and Irvine, R., 2006a The VTEM heli-time domain EM system-Four Case Studies presented at the AESC Melbourne, Australia meeting, July 2006
  6. 2006b; The VTEM airborne electromagnetic systembenchmarking continuous improvement via repeat surveys over time: 76th Annual International Meeting, SEG, Expanded Abstracts, 1273-1277.
/content/journals/10.1071/ASEG2007ab166
Loading
  • Article Type: Research Article
Keyword(s): Airborne EM; conductance; VTEM
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error