1887
Volume 35, Issue 3
  • ISSN: 0812-3985
  • E-ISSN: 1834-7533

Abstract

This study evaluates the in-situ stress field and the potential risk of fault reactivation and seal breach in the Mutineer and Exeter fields, Australian North West Shelf. Stress determinations are undertaken using pumping pressure test, rock mechanical, and log data from twelve wells. Subsequent geomechanical modelling uses the stress data to assess pore pressure changes that may induce slip on mapped faults cutting the region.

The principal stresses are assumed to be the vertical stress (S ), and a maximum and minimum horizontal stress, S and S respectively. Borehole breakouts and drilling-induced tensile fractures (DITFs) interpreted from image logs indicate S has an average orientation of 107°N and S is orientated 017°N. Leak-off test data compiled from well completion reports reveal the magnitude of S increases with depth at a rate of 17.1 MPa/km. Density log data show S can be approximated by a power law function. An upper bound to S is calculated using the frictional limit to stress beyond which faulting occurs when using a frictional coefficient of 0.6. Better constraints on the magnitude of S are gained using rock mechanical data, knowledge of S and S, mud weights, and the occurrence of borehole breakouts and DITFs. Stress magnitudes show that the tectonic regime is strike-slip (s<s<s).

The likelihood of fault reactivation in Mutineer-Exeter is expressed as the increase in pore pressure required for fault slip. Results show that faults are non-optimally orientated for reactivation by the stress field. The likelihood of brittle seal failure due to fault reactivation is low, primarily because of non-optimally orientated faults. The creation of new faults requires greater increases in pore pressure than reactivation and is thus seen as being more unlikely. The results have implications for seal integrity, well bore stability, and the safe and successful production of the fields.

© 2004 ASEG
Loading

Article metrics loading...

/content/journals/10.1071/EG04217
2004-09-01
2026-01-23

  • From This Site

    /content/journals/10.1071/EG04217
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. AadnØy, B., and Bell, J. S., 1998, Classification of drilling-induced fractures and their relationship to in-situ stress direction: The Log Analyst, 39, 27-42.
  2. Bell, J. S., 1990, Investigating stress regimes in sedimentary basins using information from oil industry wireline logs and drilling records: in Hurst et al. (eds.), Geological Applications of Wireline Logs: Geological Society of London Special Publication, 48, 305-25.
  3. Breckels, I. M., and van Eekelen, H. A.M., 1982, Relationship between horizontal stress and depth in sedimentary basins: Journal of Petroleum Technology, 34, 2191-9.
  4. Byerlee, J., 1978, Friction of Rocks: Pure and Applied Geophysics, 116, 615-26.
  5. Engelder, T., 1993, Stress Regimes in the Lithosphere: Princeton University Press.
  6. Ewy, R. T., 1998, Well bore stability predictions using a modified Lade Criterion: SPE/ISRM Eurock ‘98, Trondheim, Norway, 84th-10th July 1998. SPE 47251.
  7. Freeman, B., Yielding, G., Needham, D. T., and Badley, M. E., 1998, Fault seal prediction: the gouge ratio method: in Coward et al. (eds.), Structural Geology in Reservoir Characterisation: Geological Society of London Special Publication, 127, 19-25.
  8. Gaarenstroom, L., Tromp, R. A.J., de Jong, M. C., and Brandenburg, A. M., 1993, Overpressures in the Central North Sea: implications for trap integrity and drilling safety: in Parker, J. R. (ed.), Petroleum Geology of NW Europe: Proceedings of the 4th Conference. Geological Society of London, 1305-1313.
  9. Hermansen, H., Landa, G. H., Sylte, J. E., and Thomas, L. K., 2000, Experiences after 10 years of waterflooding the Ekofisk Field, Norway: Journal of Petroleum Science &. Engineering, 26, 11-18.
  10. Hillis, R. R., 2003, Pore pressure/stress coupling and its implications for rock failure: in van Rensbergen et al. (eds.), Subsurface Sediment Mobilisation: Geological Society of London Special Publication, 216, 359-68.
  11. Hillis, R. R., and Williams, A.F, 1993, The contemporary stress field of the Barrow-Dampier Sub-basin and its implications for horizontal drilling: Exploration Geophysics, 24, 567-76.
  12. Hillis, R. R., Meyer, J. J., and Reynolds, S. D., 1998, The Australian stress map: Exploration Geophysics, 29, 420-27.
  13. Jaeger, J. C., and Cook, N. G.W., 1979, Fundamentals of Rock Mechanics (3rd Edition): Chapman & Hall, London.
  14. Ludwig, W. E., Nafe, J. E., and Drake, C. L., 1970, Seismic refraction: in Maxwell, A. E. (ed.), The Sea: Ideas and Observations on Progress in the Study of the Seas, 4 #1, 53-84: Wiley Interscience, New York.
  15. Matthai, S. K., Aydin, A., Pollard, D. D., and Roberts, S. G., 1998, Numerical simulation of departures from radial drawdown in a faulted sandstone reservoir with joints and deformation bands: in Jones et al. (eds.), Faulting, Fault Sealing and Fluid Flow in Hydrocarbon Reservoirs: Geological Society of London Special Publication, 147, 157-91.
  16. Matthews, W., and Kelly, J., 1967, How to predict formation pressure and fracture gradient: Oil &. Gas Journal, 65, 92-106.
  17. Mildren, S. D., Hillis, R. R., and Kaldi, J., 2002, Calibrating predictions of fault seal reactivation in the Timor Sea: APPEA Journal, 42 #1, 187-202.
  18. Moos, D., and Zoback, M. D., 1990, Utilisation of Observations of Well Bore Failure to Constrain the Orientation and Magnitude of Crustal Stresses: Application to Continental, Deep Sea Drilling Project and Ocean Drilling Program Boreholes: Journal of Geophysical Research, 95 #B6, 9305-25.
  19. O‘Brien, G. W., Quaife, P., Cowley, R., Morse, M., Wilson, D., Fellows, M., and Lisk, M., 1998, Evaluating trap Integrity in the Vulcan Sub-basin, Timor Sea, Australia, using Integrated Remote-Sensing Geochemical Technologies: in Purcell, P. G., and Purcell, R. R. (eds.), The Sedimentary Basins of Western Australia 2. Proceedings of the PESA Symposium, 237-54.
  20. Peska, P., and Zoback, M. D., 1995, Compressive and tensile failure of inclined well bores and determination of in-situ stress and rock strength: Journal of Geophysical Research, 100, 12791-811.
  21. Plumb, R. A., and Hickman, S. H., 1985, Stress-induced borehole elongation: a comparison between 4-arm dipmeter and the borehole televiewer in the Auburn geothermal well: Journal of Geophysical Research, 90, 5513-21.
  22. Sibson, R. H., 1994, Crustal Stress, Faulting and Fluid Flow: in Parnell, J. (ed.), Geofluids: Origin, Migration and Evolution of Fluids in Sedimentary Basins: Geological Society of London Special Publication, 78, 69-84.
  23. Smith, D. A., 1980, Sealing and non-sealing faults in Louisiana Gulf Coast Salt Basin: AAPG Bulletin, 64, 145-72.
  24. Streit, J. E., and Hillis, R. R., 2002, Estimating fluid pressures that can induce reservoir failure during hydrocarbon depletion: SPE/ISRM Rock Mechanics Conference, Irving, Texas, 20th-23rd October 2002.
  25. Teufel, L. W., Rhett, D.W, and Farrell, H. E., 1991, Effect of reservoir depletion and pore pressure drawdown on in-situ stress and deformation in the Ekofisk Field, North Sea: Proceedings of 32nd U. S. Symposium on Rock Mechanics, Balkema, 63-72.
  26. Tingay, M. R.P, Hillis, R. R., Morley, C. K., Swarbrick, R. E., and Okpere, E. C., 2003, Variation in vertical stress in the Baram Basin, Brunei: tectonic and geomechanical implications: Marine &. Petroleum Geology, 20, 1201-1212.
  27. White, A. J., Traugott, M. O., and Swarbrick, R. E., 2002, The use of leak-off tests as means of predicting minimum in-situ stress: Petroleum Geoscience, 8 #2, 189-93.
  28. Yassir, N. A., and Rogers, A. L., 1993, Overpressures, fluid flow and stress regimes in the Jeanne D‘Arc Basin, Canada: International Journal of Rock Mechanics, Mining Sciences and Geomechanical Abstracts, 30 #7, 1209-13.
  29. Yielding, G., Øverland, J. A., and Byberg, G., 1999, Characterisation of Fault Zones for Reservoir Modelling: An Example from the Gullfaks Field, Northern North Sea: AAPG Bulletin, 83, 925-51.
  30. Zoback, M. D., and Healy, J., 1984, Friction, faulting and in-situ stress: Annales Geophysicae, 2, 689-98.
  31. Zoback, M. D., Moos, D., Mastin, N., and Anderson, R. L., 1985, Well bore breakouts and in-situ stress: Journal of Geophysical Research, 90, 5523-30.
/content/journals/10.1071/EG04217
Loading
  • Article Type: Research Article
Keyword(s): Australian North West Shelf; fault reactivation; geomechanical modelling; in-situ stress field; Mutineer and Exeter fields

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error