1887
Volume 37, Issue 1
  • ISSN: 0812-3985
  • E-ISSN: 1834-7533

Abstract

Urban conditions, such as existing underground facilities and ambient noise due to cultural activity, restrict the general application of conventional geophysical techniques. At a tunnelling site in an urban area along an existing railroad, we used the refraction microtremor (REMI) technique (Louie, 2001) as an alternative way to get geotechnical information. The REMI method uses ambient noise recorded by standard refraction equipment and a linear geophone array to derive a shear-wave velocity profile. In the inversion procedure, the Rayleigh wave dispersion curve is picked from a wavefield transformation, and iteratively modelled to get the S-wave velocity structure.

The REMI survey was carried out along the line of the planned railway tunnel. At this site vibrations from trains and cars provided strong seismic sources that allowed REMI to be very effective. The objective of the survey was to evaluate the rock mass rating (RMR), using shear-wave velocity information from REMI. First, the relation between uniaxial compressive strength, which is a component of the RMR, and shear-wave velocity from laboratory tests was studied to learn whether shear-wave velocity and RMR are closely related. Then Suspension PS (SPS) logging was performed in selected boreholes along the profile, in order to draw out the quantitative relation between the shear-wave velocity from SPS logging and the RMR determined from inspection of core from the same boreholes. In these tests, shear-wave velocity showed fairly good correlation with RMR. A good relation between shear-wave velocity from REMI and RMR could be obtained, so it is possible to estimate the RMR of the entire profile for use in design of the underground tunnel.

© 2006 ASEG
Loading

Article metrics loading...

/content/journals/10.1071/EG06108
2006-03-01
2026-01-19

  • From This Site

    /content/journals/10.1071/EG06108
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Aki, L., 1957, Space and time spectra of stationary stochastic waves, with special reference to microtremors: Bulletin of the Earthquake Research Institute, 35, 415–456.
  2. Bieniawski, Z.T., 1976, Rock mass classification in rock engineering applications: Proceedings of a Symposium on Exploration for Rock Engineering, Balkema, 12, 97–106.
  3. Batzle, M., Hofmann, R.B., Han, D.-H., and Castagna, J., 2001, Fluid and frequency dependent seismic velocity of rocks: The Leading Edge, 20, 168–171.
  4. Hayashi, K., Inazaki, T., and Suzuki, H., 2004, Buried channel delineation using a passive surface wave method: Proceeding of the 7th SEGJ International Symposium, 395–400.
  5. Louie, J. N., 2001, Faster, better: shear-wave velocity to 100 meters depth from refraction microtremor arrays: Bulletin of the Seismological Society of America, 91, 347–364.
  6. Louie, J.N., Abbott, R.E., and Pullammanappallil, S., 2002, Refraction microtremor and optimization methods as alternatives to boreholes for site strength and earthquake hazard assessments: Proceedings of 15th Annual Symposium on the Application of Geophysics to Environmental and Engineering Problems (SAGEEP ‘02), Environmental & Engineering Geophysical Society, 12GAP8.
  7. Okada, H., 2003, The microtremor survey method: Society of Exploration Geophysicists.
  8. Park, C.B., Miller, R.D., and Xia, J., 1999, Multi-channel analysis of surface waves: Geophysics, 64, 800–808.
  9. Pullammanappallil, S., Honjas, B., and Louie J., 2003, Determination of 1-D shear wave velocities using the refraction microtremor method: Proceedings of the third international conference on the application of geophysical methodologies and NDT to transportation and infrastructure.
  10. Roberts, J., and Asten, M., 2004, Resolving a velocity inversion at the geotechnical scale using the microtremor (passive seismic) survey method: Exploration Geophysics, 35, 14–18.
  11. Roberts, J., and Asten, M., 2005, Estimating the shear velocity profile of Quaternary silts using microtremor array (SPAC) measurements: Exploration Geophysics, 35, 34–40.
  12. Rucker, M.L., 2003, Applying the refraction microtremor (ReMi) shear wave technique to geotechnical characterization: Proceedings of the third international conference on the application of geophysical methodologies and NDT to transportation and infrastructure.
  13. Saito, M., 1979, Computations of reflectivity and surface wave dispersion curves for layered media; I, Sound wave and SH wave: Butsuri-Tanko, 32, 5–26.
  14. Saito, M., 1988, Compound matrix method for the calculation of spheroidal oscillation of the Earth: Seismological Research Letters, 59, 29.
  15. Thorson, J.R., and Claerbout, J.F., 1985, Velocity-stack and slant-stack stochastic inversion: Geophysics, 50, 2727–2741.
/content/journals/10.1071/EG06108
Loading
  • Article Type: Research Article
Keyword(s): railway tunnel; Rayleigh wave; refraction microtremor (REMI); rock mass rating (RMR); shear-wave velocity

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error