1887
Volume 44, Issue 4
  • ISSN: 0812-3985
  • E-ISSN: 1834-7533

Abstract

Knowledge of orientations and magnitudes of present-day stresses is important for different applications including fault reactivation, borehole stability and CO injection studies. As part of the West Hub Carbon Capture and Storage project, the GSWA Harvey-1 well was drilled in early 2012. It is located ~115 km south of Perth and is used to assess the suitability for CO underground storage. The aim of this study is to estimate the mechanical properties and state of stress fields in the Southern Perth Basin. The analysis is based on the newly acquired log and VSP data and results of a rock mechanical model including vertical profiles of elastic and strength properties as well as identified breakout zones. The results indicate that the stress regime in the region is dominantly strike-slip. It changes to a reverse faulting system at shallow depths of below ~900 m. Stress field orientation is obtained from borehole breakout analysis. The average azimuth of the maximum horizontal stress is 106° and the standard deviation is 10°. This direction of the maximum horizontal stress is broadly consistent with the east–west direction earlier reported for the Perth Basin.

Loading

Article metrics loading...

/content/journals/10.1071/EG13046
2013-12-01
2026-01-23
Loading full text...

Full text loading...

References

  1. Bradford, I. D. R., Fuller, J., Thompson, P. J, and Walsgrove, T. R., 1998, Benefits of assessing the solids production risk in a North Sea reservoir using elastoplastic modelling: SPE/ISRM Eurock 98, Trondheim, Norway, 261–269.
  2. Castagna, J. P., Batzle, M. L., and Kan, T. K., 1993, Rock physics - The link between rock properties and AVO response, in J. P. Castagna, and M. M. Backus, eds., Offset-dependent reflectivity – Theory and practice of AVO analysis: Society of Exploration Geophysics, 124–157.
  3. Delle Piane, C., Olierook, H. K. H., Timms, N. E., Saeedi, A., Esteban, L., Rezaee, R., Mikhaltsevitch, V., Iglauer, S., and Lebedev, M., 2013, Facies-based rock properties distribution along the Harvey 1 stratigraphic well: CSIRO Report Number EP133710.
  4. DMP, 2012, South West CO2 Geosequestration Hub: Department of Mines and Petroleum, Government of Western Australia.
  5. DMP, 2013, Harvey 1 stratigraphic well research outcomes, August 2013. South West CO2 Geosequestration Hub.
  6. Fjaer, J., Holt, R. M., Horsrud, P., Raaen, A. M., and Risenes, R., 2008, Petroleum-related rock mechanics (2nd edition), Developments in Petroleum Science Vol. 53: Elsevier.
  7. Gardner G. H. F. Gardner L. W. Gregory A. R. 1974 Formation velocity and density – diagnostic basics for stratigraphic traps: Geophysics 39 770 780 10.1190/1.1440465
    https://doi.org/10.1190/1.1440465 [Google Scholar]
  8. Hillis R. R. Reynolds S. D. 2000 The Australian stress map.: Journal of the Geological Society (London) 157 915 921 10.1144/jgs.157.5.915
    https://doi.org/10.1144/jgs.157.5.915 [Google Scholar]
  9. King R. C. Hillis R. R. Reynolds S. D. 2008 In situ stresses and natural fractures in the Northern Perth Basin, Australia: Australian Journal of Earth Sciences 55 685 701
    [Google Scholar]
  10. Morales, R. H., and Marcinew, R. P., 1993, Fracturing of high-permeability formations: mechanical properties correlations: Society of Petroleum Engineers Annual Technical Conference and Exhibition, 3–6 October 1993, Houston, Texas, SPE paper no. 26561.
  11. Plumb, R. A., 1994, Influence of composition and texture on the failure properties of clastic rocks: Rock Mechanics in Petroleum Engineering, 29–31 August 1994, Delft, The Netherlands, SPE paper no. 28022.
  12. Rasouli V. Zacharia J. Elike M. 2011 The influence of perturbed stresses near faults on drilling strategy: a case study in Blacktip field, North Australia: Journal of Petroleum Science Engineering 76 37 50 10.1016/j.petrol.2010.12.003
    https://doi.org/10.1016/j.petrol.2010.12.003 [Google Scholar]
  13. Reinecker, J., Tingay, M., and Müller, B., 2003, Borehole breakout analysis from four-arm caliper logs: World Stress Map Project, Guidelines. Available at http://dc-app3-14.gfz-potsdam.de/pub/stress_data/stress_data_frame.html
  14. Van Ruth, P. J., 2006, Geomechanics: Vlaming sub-basin, Western Australia: CO2CRC Report Number RPT06-0043, 30 pp.
  15. Zoback, M. (ed.), 2007, Reservoir geomechanics: Cambridge University Press.
/content/journals/10.1071/EG13046
Loading
/content/journals/10.1071/EG13046
Loading

Data & Media loading...

  • Article Type: Research Article
Keyword(s): borehole breakouts; GSWA Harvey-1; in-situ stresses; Southern Perth Basin; strike-slip

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error