1887
Volume 24, Issue 3-4
  • ISSN: 0812-3985
  • E-ISSN: 1834-7533

Abstract

The interpretation of borehole breakouts suggests that minimum horizontal stress (σ) Is regionally oriented approximately N-S in the Barrow-Dampier Sub-Basin. More locally, breakout interpretation suggests that σ orientation is 005°-010° in the Wanaea/Cossack area, and 012°-022° in the Griffin/Chinook/Scindian area. Horizontal stress magnitudes in the Wanaea/Cossack area, derived from modified leak-off tests, together with vertical stress magnitudes derived from density and sonic log data, suggest that the stress (fault) regime in the Wanaea/Cossack area is on the boundary of extension (normal faulting) and strike-slip.

The contemporary stress field impacts on planning the drilling direction of deviated and horizontal wells through the issues of mechanical wellbore stability and fracture intersection. In order to maximise intersection with any open, natural fractures, and to optimise any hydraulic fracturing program, wellbores should be horizontal and parallel to σ (minimum horizontal compressive stress) in the extensional (normal fault) and strike-slip stress regimes, and vertical in the compressional (reverse fault) regime. In order to minimise the tendency for borehole breakout, the stress anisotropy around the wellbore should be minimised — i.e. horizontal wells should be drilled in the direction of σ in the extensional regime, and in the direction of σ (maximum horizontal compressive stress) in the compressional regime. In the strike-slip regime, horizontal wells can be oriented such that they are not subject to any stess anisotropy by progressively changing from the σ direction towards the σ direction as the horizontal stresses increase with respect to the vertical.

In the Wanaea/Cossack area, wells drilled towards 005°-010° or 185°-190° will maximise the potential for intersection with open, natural fractures (should they be present), and recovery from any induced, hydraulic fracturing will be optimised. Furthermore, wells in this direction will be subject to the minimum stress anisotropy, and are thus least likely to be subject to breakout.

© 1993 ASEG
Loading

Article metrics loading...

/content/journals/10.1071/EG993567
1993-09-01
2026-01-21

  • From This Site

    /content/journals/10.1071/EG993567
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Bell, J.S. and Babcock, E.A. (1986), ‘The stress regime of the western Canadian Basin and implications for hydrocarbon production’, Bulletin of Canadian Petroleum Geology34, 364–378.
  2. Bell, J.S. and Gough, D.l. (1979), ‘Northeast-southwest compressive stress in Alberta: evidence from oil wells’, Earth and Planetary Science Letters45, 475–482.
  3. Cloetingh, S. and Wortel, R. (1986), ‘Stress in the Indo-Australian Plate’, Tectonophysics132, 49–67.
  4. Coblentz, D.D., Zhou, S., Hillis, R.R., Richardson, R.M. and Sandiford, M. (under review), ‘Tectonic stress in the Indo-Australian Plate’, submitted to J. Geophys. Res..
  5. Corbett, K., Friedman, M. and Spang, J. (1987), ‘Fracture development and mechanical stratigraphy of the Austin Chalk, Texas’, American Association of Petroleum Geologists Bulletin71, 17–28.
  6. Dart, R.L. and Zoback, M.L. (1989), ‘Wellbore breakout stress analysis within the central and eastern continental United States’, The Log Analyst30, Jan-Feb, 12-25.
  7. Detournay, E. and Cheng, A. (1992), ‘Influence of pressurization rate on the magnitude of the breakdown pressure’, proceedings of the 33rd US Rock Mechanics Symposium, Santa Fe, New Mexico, 325–333.
  8. Enever, J.R. (1988), Ten years experience with hydraulic fracture stress measurement in Australia’, 2nd International Workshop on Hydraulic Fracture Stress Measurement, University of Wisconsin, Madison 1, 19–92.
  9. Hansen, K.S. and Purcell, W.R. (1989), ‘Earth stress measurements in the south Belridge Oil Field, Kern County, California’, Society of Petroleum Engineers Formation Evaluation3, 541–549.
  10. Hillis, R.R. and Williams, A.F. (1992), ‘Borehole breakouts and stress analysis in the Timor Sea’, In Hurst, A., Griffiths, C.M. and Worthington, P.F. (Eds), Geological Applications of Wireline Logs II. Geological Society Special Publication65, 157–168.
  11. Hillis, R.R. and Williams, A.F. (1993), The stress field of the North West Shelf and wellbore stability’, APEA Journal33, 373–385.
  12. Horn, M.K. (1991), ‘Play concepts for horizontal drilling’, In Fritz, R.D., Horn, M.K. and Joshi, S.D., Geological Aspects of Horizontal Drilling, American Association of Petroleum Geologists Continuing Education Course Note Series 33, 189–323.
  13. Joshi, S.D. (1991), ‘Overview and application of horizontal wells’, In Fritz, R.D., Horn, M.K. and Joshi, S.D., Geological Aspects of Horizontal Drilling, American Association of Petroleum Geologists Continuing Education Course Note Series 33, 51–64.
  14. Lacy, L.L. and Smith, M.B. (1989), ‘Fracture azimuth and geometry determination’ In Gidley, J.L., Holditch, S.A., Nierode, D.E. and Veatch, R.W. Jr. (Eds), Recent advances in hydraulic fracturing. Society of Petroleum Engineers Monograph Series 12, 341–356.
  15. Lang, W.J. and Jett, M.B. (1990), ‘High expectations for horizontal drilling becoming reality’, Oil and Gas Journal, Sep. 24, 70–79.
  16. Ludwig, J.W., Nafe, J.E. and Drake, C.L. (1970), ‘Seismic refraction’, In Maxwell, A.E. (Ed), The Sea: Ideas and Observations on Progress in the Study of the Seas, Volume 4: New Concepts of Sea Floor Evolution. Wiley - Interscience, New York 53–84.
  17. Martin, M.A. and Davis, T.L. (1987), ‘Shear-wave birefringence: a new tool for evaluating fractured reservoirs’, The Leading Edge6, October, 22–28.
  18. McGarr, A. and Gay, N.C. (1978), ‘State of stress in the Earth’s crust’, Annual Review of Earth and Planentary Sciences6, 405–436.
  19. McNaughton, D.A. (1991), ‘Horizontal drilling vs. hydraulic fracturing,’ AAPG Explorer12, January, 39.
  20. McNicoll, R. (1991), ‘Horizontal drilling in Australia: three case histories’, APEA Journal31, 354–358.
  21. Plumb, R.A. and Hickman, S.H. (1985), ‘Stress-induced borehole elongation: a comparison between the four-arm dipmeter and the borehole televiewer in the Auburn geothermal well’, J. Geophys. Res.90, 5513–5521.
  22. Prensky, S. (1992), ‘Borehole breakouts and in-situ rock stress — a review’, The Log Analyst May-June, 304-312.
  23. Queen, J.H. and Rizer, W.D. (1990), ‘An integrated study of seismic anisotropy and the natural fracture system at the Conoco borehole test facility, Kay County, Oklahoma’, J. Geophys. Res.95, 11255–11273.
  24. Schlumberger (1981), ‘Dipmeter Interpretation’, Schlumberger Educational Services, Volume 1.
  25. Scholes, W. (1992), ‘Woodside long-reach gas well breaks record’, Petroleum Review, October, 494–495.
  26. Tan, C.P., Willoughby, D.R., Hillis, R.R., Zhou, S., Muhlhaus, H.B. and Aoki, T. (in press) ‘Wellbore instability in the North West Shelf of Australia’, APEA Journal34.
  27. Zoback, M.D., Moos, D., Mastin, L. and Anderson, R.N. (1985), ‘Well bore breakout and in-situ stress’, J. Geophys. Res., 90, 5523–5530.
/content/journals/10.1071/EG993567
Loading
  • Article Type: Research Article
Keyword(s): Barrow-Dampier Sub-Basin.; crustal stress field; fractures; horizontal drilling; wellbore stability

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error