1887
Volume 29, Issue 1-2
  • ISSN: 0812-3985
  • E-ISSN: 1834-7533

Abstract

When airborne electromagnetic (AEM) data is acquired as a streamed or time-series data set, the great redundancy in the data favours compression as a first step in processing. Traditional data compression schemes are time windowing and spatial averaging. An alternative, more efficient data compression scheme is to transform time or frequency domain data to time-constant tau space, which has the effect of removing the waveform dependence of the AEM response.

When there are many local anomalies and a variable background, the next stage of rapid processing is to transform the response to a conductivity-depth image (CDI) to facilitate geological interpretation of the background response. Use of the full time range of recorded data, particularly the inclusion of on-time data, improves the stability of the CDI process.

The final AEM data processing step for mineral exploration is to assess the likelihood that any local anomaly corresponds to a desired economic target. This step involves the extraction of target geometry and conductivity information from the AEM data. The only economically feasible route at the present time is to parameterise both the data (using inductive and resistive limits) and the model to allow inversion of the local anomalies. A fit to one or two platelike conductors can be achieved in seconds; fits to a blocklike body take minutes on a fast PC. A significant research challenge remains to speed up and stabilise this process.

© 1998 ASEG
Loading

Article metrics loading...

/content/journals/10.1071/EG998163
1998-03-01
2026-01-23

  • From This Site

    /content/journals/10.1071/EG998163
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Dyck, A.V., Bloore, M. and Vallee, M.A., 1980, User manual for programs Plate and Sphere: Research in Applied Geophysics 14, Geophysics Laboratory, University of Toronto.
  2. Eaton, P.A. and Hohmann, G.W., 1989, A rapid inversion technique for transient electromagnetic soundings: Phys. Earth Planet. Int. 53, 384–404.
  3. Fullagar, P.K., 1989, Generation of conductivity depth pseudo-sections from coincident loop and in-loop TEM data: Exploration Geophysics 20, 43–45.
  4. Fullagar, P.K. and Reid, J.E., 1992, Conductivity-depth transformations of fixed loop TEM data: Exploration Geophysics 23, 515–520.
  5. Grant, F.S. and West, G.F., 1965, Interpretation Theory in Applied Geophysics: McGraw Hill.
  6. King, A., 1998, Inversion of localised electromagnetic anomalies: Ph.D. thesis, Macquarie University.
  7. Lamontagne, Y., 1975, Application of wideband, time domain measurements in mineral exploration, Ph. D., thesis, University of Toronto.
  8. Lamontagne, Y., Macnae, J.C. and Polzer, B., 1988, Multiple conductor modelling using program MuliLoop: 58th Annual Internat. Mtg., Soc. Expl. Geophys., Expanded Abstracts, Session:EM2.5.
  9. Liu, G. and Asten, M., 1993, Fast approximate solutions of transient EM rsponse of a target buried beneath a conductive overburden: Geophysics 58, 810–817.
  10. Macnae, J. and Lamontagne, Y., 1987, Imaging quasi-layered conductive structures by simple processing of transient electromagnetic data: Geophysics 52, 545–554.
  11. Macnae, J.C., Smith, R., Polzer, B.D., Lamontagne, Y. and Klinkert, P.S., 1991, Conductivity-depth imaging of airborne electromagnetic step-response data: Geophysics 56, 102–114.
  12. Macnae, J.C., King, A., Stolz, E. and Klinkert, P., 1998, 3D EM inversion to the limit, in M. Oristaglio, and B. Spies (Eds), Three-Dimensional Electromagnetics: Soc. Expl. Geophys.
  13. Mencke, W., 1984, Geophysical Data Analysis: Discrete Inverse Theory, Academic Press, San Diego.
  14. Nekut, A.G., 1987, Direct inversion of time-domain electromagnetic data: Geophysics 52, 1431–1435.
  15. Sattel, D. 1998, Conductivity information in three dimensions: Exploration Geophysics (this issue).
  16. Smith R.S., Annan, A.P., Lemieux, J. and Pedersen, R.N., 1996, Application of a modified GEOTEM system to reconnaissance exploration for kimberlites in the Point lake area, NWT, Canada: Geophysics 61, 82–92.
  17. Smith R.S., Edwards, R.N. and Buselli, G., 1994, Automatic technique for presentation of coincident-loop, impulse-response, transient, electromagnetic data: Geophysics 59, 1542–1550.
  18. Stolz, E.S. and Macnae, J.C., 1998, Evaluating EM waveforms by singular-value decomposition of exponential basis functions: Geophysics 63, 64–74.
/content/journals/10.1071/EG998163
Loading
  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error