1887
2nd Australasian Exploration Geoscience Conference: Data to Discovery
  • ISSN: 2202-0586
  • E-ISSN:
PDF

Abstract

Summary

Definition of the basement architecture within the Ceduna Sub-basin is poorly understood due to the depth of the basin and limited deep crustal geophysical datasets. This study uses seismic interpretation of BightSPAN™ deep crustal seismic lines combined with 2D forward models of the gravity to define the basement architecture in the Ceduna Sub-basin. Gravity forward models identify two depocentres with maximum depths of 25 km overlying thinned continental crust. Syn-rift sedimentary packages are several km thick and underlie up to 10 km of postkinematic Cretaceous deltaic sequences. Regional Moho models contain only sparse data points offshore and isostatic residual gravity data suggests substantial local variation in the depth to Moho. This local variation in the Moho surface is interpreted as boudinage of a weak lower crust along crustal shear zones. A gradual increase in basement density towards the continent-ocean transition suggests a diffuse rather than distinct boundary between continental and oceanic crust.

The results of this work are used to constrain the tectonic evolution, particularly in terms of the subsidence history and uplift and erosional pulses recorded on the seismic data in the Ceduna Delta (Hill et al., this volume) and then used as input for finite element numerical models of rifting (Farrington et al., this volume).

© 2019 Taylor and Francis Group LLC
Loading

Article metrics loading...

/content/journals/10.1080/22020586.2019.12073121
2019-12-01
2026-01-17

  • From This Site

    /content/journals/10.1080/22020586.2019.12073121
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Aitken, A.R.A., 2010. Moho goemetry gravity inversion experiement (MoGGIE): A refined model of the Australian Moho, and its tectonic and isostatic implications. Earth and Planetary Science Letters 297, 71-83.
  2. Ball, P., G. Eagles, C. Ebinger, K. McClay, and T. Totterdell, (2013), The spatial and temporal evolution of strain during the separation of Australia and Antarctica, Geochem. Geophys. Geosyst., 14, (8) 2771–2799, doi:10.1002/ggge.20160
  3. Blevin and Cathro, 2008, Australian Southern Margin Synthesis, Project GA707, Client Report to Geoscience Australia by FrOG Tech Pty Ltd. https://d28rz98at9flks.cloudfront.net/68892/68892.pdf, retrieved 11/04/2019.
  4. Brune, S., Heine, C., Clift, P.D., Pérez-Gussinyé, M., 2017. Rifted margin architecture and crustal rheology: reviewing Iberia-Newfoundland, central South Atlantic, and South China Sea. Marine and Petroleum Geology, 79, 257-281.
  5. Clerc, C., Ringenbach, J.C., Jolivet, L., Ballard, J.-F., 2018. Rifted margins: Ductile deformation, boudinage, continentward-dipping normal faults and the role of the weak lower crust. Gondwana Research, 53, pp. 20-40
  6. Direen, N.G., 2011a. Comment on “Antarctica — before and after Gondwana” by S.D. Boger Gondwana Research, 19(2), March 2011, pp. 335–371. Gondwana Research 21 (1), 302–304. http://dx.doi.org/10.1016/j.gr.2011.08.008.
  7. Direen, N. G., Stagg, H. M. J., Symonds, P. A. & Colwell, J. B. 2011b. Dominant symmetry of a conjugate southern Australian and East Antarctic magmapoor rifted margin segment. Geochemistry Geophysics Geosystems, 12, Q02006, doi: 10.1029/2010gc 003306.
  8. Direen, N. J., H. M. J. Stagg, P. A. Symonds, and I. O. Norton (2012), Variations in rift symmetry: Cautionary examples from the Southern Rift System (Australia-Antarctica), in Conjugate Divergent Margins, vol. 369, edited by W. Mohriak, M. Nemcok, A. Danforth, and S. Sinha, pp. 1–20, Geol. Soc. Spec. Publ., London, doi:10.1144/SP369.4
  9. Duretz, T., Petri, B., Mohn, G., Schmalholz, S.M., Schenker, F.L., Müntener, O., 2016. The importance of structural softening for the evolution and architecture of pas-sive margins. Sci. Rep.6, 38704. https://doi .org /10 .1038 /srep38704
  10. Eagles, G., Perez-Diaz, L., Scarselli, N., 2015. Getting over continent ocean boundaries. Earth Science Reviews, 151, 244- 265.
  11. Espurt, N., Callot, J.-P., Totterdell, J., Struckmeyer, H. and Vially, R., 2009. Interactions between continental breakup dynamics and large-scale delta system evolution: insights from the Cretaceous Ceduna delta system, Bight Basin, Southern Australian margin. Tectonics, 28, TC6002.
  12. Farrington R., Beucher R., Hill K.C. and Cunneen J., this volume. The Bight Basin, Evolution & Prospectivity III; Underworld Finite Element modelling, maturity & migration.
  13. Gibson, G.M., Totterdell, J.M., White, L.T., Mitchell, C.H., Stacey, A.R., Morse, M.P., Whitaker, A., 2013. Pre-existing basement structure and its influence on continental rifting and fracture zone development along Australia's southern rifted margin. Journal of the Geological Society 170, 365–377. http://dx.doi.org/10.1144/jgs2012-040.
  14. Hill, K.C., Cunneen, J.C., & Farrington, R., this volume. The Bight Basin, Evolution & Prospectivity II: Seismic, structure and balanced sections.
  15. Kennett, B.L.N., Salmon, M.L., Saygin, E., 2011. AusMoho: the variation of Moho depth in Australia. Geophysical Journal International 187, 946-958.
  16. Struckmeyer, H.I.M., Totterdell, J.M., Blevin, J.E., Logan, G.A., Boreham, C.J., Deighton, I., Krassay, A.A. & Bradshaw, M.T., 2001. Character, maturity and distribution of potential Cretaceous oil source rocks in the Ceduna Sub-basin, Bight Basin, Great Australian Bight. In: Hill, K.C. & Bernecker, T. (Editors), Eastern Australian Basin Symposium: a refocused energy perspective for the future. Petroleum Exploration Society of Australia, Special Publication, 543–552.
  17. Tetreault, J.L., & Buiter, S.J.H., 2018. The influence of extension rate and crustal rheology on the evolution of passive margins from rifting to break-up. Tectonophysics, 746, 155-172, doi:10.1016/j.tecto.2017.08.029
  18. Totterdell, J.M., Bradshaw, B.E., 2004. The structural framework and tectonic evolution of the Bight Basin. In: Boult, P.J., Johns, D.R., Lang, S.C. (Eds.), Eastern Australasian Basins Symposium II. Petroleum Exploration Society of Australia, Adelaide, South Australia, pp. 41–61.
  19. Totterdell, J.M., Hall, L., Hashimoto, T., Owen, K. and Bradshaw, M.T., 2014. Petroleum geology inventory of Australia’s offshore frontier basins. Record 2014/09. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2014.009
  20. White, L., Gibson, G., and Lister, G., 2013, A reassessment of paleogeographic reconstructions of eastern Gondwana: Bringing geology back into the equation: Gondwana Research, 24, p. 984-998.
  21. Whittaker, J. M., S. E. Williams, and R. D. Muller (2013), Revised tectonic evolution of the eastern Indian Ocean, Geochem.Geophys. Geosyst., doi:10.1002/ggge.20120
  22. Williams, S. E., Whittaker, J. M., and Muller, R. D. (2011), Full-fit, palinspastic reconstruction of the conjugate Australian–Antarctic margins, Tectonics, 30, TC6012, doi:10.1029/2011TC002912.
  23. Williams, S.E., Whittaker, J.M., Halpin, J.A., Müller, R.D., 2019. Australian-Antarctic breakup and seafloor spreading: balancing geological and geophysical constraints. Earth-Sci. Rev. 188, 41–58.
/content/journals/10.1080/22020586.2019.12073121
Loading
  • Article Type: Research Article
Keyword(s): Bight Basin; crustal thickness; depocentre; gravity; Tectonics

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error