Full text loading...
-
Research Note: The mean sensitivity depth of the electrical resistivity method
- Source: Geophysical Prospecting, Volume 64, Issue 5, Aug 2016, p. 1399 - 1409
-
- 01 Nov 2014
- 01 Jul 2015
- 26 Jan 2016
- Previous Article
- Table of Contents
- Next Article
Abstract
Until now, a simple formula to estimate the depth of investigation of the electrical resistivity method that takes into account the positions of all of the electrodes for a general four‐electrode array has not been available. While the depth sensitivity function of the method for a homogeneous infinite half‐space is well known, previous attempts to use it to characterize the depth of investigation have involved calculating its peak and median, both of which must be determined numerically for a general four‐electrode array. I will show that the mean of the sensitivity function, which has not been considered previously, does admit a very simple mathematical formula. I compare the mean depth with the median and peak sensitivity depths for some common arrays. The mean is always greater than or equal to the median that is always greater than the peak. All three measures give reasonable estimates to the depths of actual structures for most circumstances. I will further show that, for 1D soundings, the use of the mean sensitivity depth as the pseudo‐depth assigns an apparent resistivity to a given pseudo‐depth that is consistent between different arrays. One consequence of this is that smoother depth soundings are obtained as “clutches,” caused by a change in the depth sensitivity due to moving the potential electrodes, are effectively removed. I expect that the mean depth formula will be a useful “rule of thumb” for estimating the depth of investigation before the resistivity structure of the ground is known.