1887
Volume 71 Number 7
  • E-ISSN: 1365-2478

Abstract

Abstract

In this study, we explore the latest generation of seismic imaging algorithms (migration) that have been successful in the oil and gas exploration industry and apply them in the more challenging hard rock environment. Seismic migration is a crucial processing step required to build an accurate image of the Earth's subsurface. The seismic method applied in a hard rock environment has a specific set of challenges: complex geological settings often comprised of steeply dipping interfaces and heterogeneities (faults, fracture zones, thrusts, etc.); spatially variable zones of alteration, low intrinsic signal‐to‐noise ratio; complex near‐surface conditions (the weathered overburden has a very high contrast in seismic properties with base formations). Here, we present how a dense source–receiver 3D grid in combination with the latest pre‐stack depth imaging techniques can image the geology with a remarkable level of detail and to depths as shallow as the top of fresh rock. We also propose a comprehensive velocity model building strategy applied specifically to the Carosue Dam deposit, Western Australia, which is mainly characterized by volcaniclastic and volcanic rocks within the Carosue Basin disrupted by a complex system of gold‐bearing faults. To arrive at an optimized velocity model for pre‐stack depth imaging, we combine drillhole data with tomographic refinement. Excellent correlation between resultant seismic images and refraction tomography, vertical seismic profiling and drillholes can be attributed to the integrated velocity model building workflow used for depth migration.

Loading

Article metrics loading...

/content/journals/10.1111/1365-2478.13314
2023-09-09
2025-07-19
Loading full text...

Full text loading...

/deliver/fulltext/gpr/71/7/gpr13314.html?itemId=/content/journals/10.1111/1365-2478.13314&mimeType=html&fmt=ahah

References

  1. Adamczyk, A., Malinowski, M. & Melehmir, A. (2014) High‐resolution near‐surface velocity model building using full‐waveform inversion – a case study from southwest Sweden. Geophysical Journal of International, 197, 1693–1704.
    [Google Scholar]
  2. Adamczyk, A., Malinowski, M. & Górszczyk, A. (2015) Full‐waveform inversion of conventional vibroseis data recorded along a regional profile from southeast Poland. Geophysical Journal International, 203, 351–365.
    [Google Scholar]
  3. Berson, I.S. (1957) High‐frequency seismic: Moscow, USSR Academy of Science, 239.
    [Google Scholar]
  4. Bohlen, T., Mueller, C. & Milkereit, B. (2003) 5. Elastic Seismic‐Wave Scattering from Massive Sulfide Orebodies: On the Role of Composition and Shape. https://doi.org/10.1190/1.9781560802396.ch5
  5. Brodic, B., Malehmir, A., Pacheco, N., Juhlin, C., Carvalho, J., Dynesius, L. et al. (2021) Innovative seismic imaging of volcanogenic massive sulphide deposits, Neves‐Corvo, Portugal – Part 1: In‐mine array. Geophysics, 86, 165–179.
    [Google Scholar]
  6. Broüning, L., Buske, S., Malehmir, A., Backström, E., Schön, M. & Marsden, P. (2020) Seismic depth imaging of iron‐oxide deposits and their host rocks in the Ludvika mining area of central Sweden. Geophysical Prospecting, 68, 24–43.
    [Google Scholar]
  7. Buzlukov, V. & Landa, E. (2013) Imaging improvement by prestack signal enhancement. Geophysical Prospecting, 61(6), 1150–1158.
    [Google Scholar]
  8. Cassidy, K.F., Champion, D.C., Krapez, B., Barley, M.E., Brown, S.J.A., Blewett, R.S., Groenewald, P.B. & Tyler, I.M. (2006) A revised geological framework for the Yilgarn Craton: Western Australia Geological Survey, Record 2006/8.
  9. Claerbout, J.F. (1971) Toward a unified theory of reflection mapping. Geophysics, 36(3), 467–481.
    [Google Scholar]
  10. Dean, T., Tulett, J. & Barnwell, R. (2018) Nodal land seismic acquisition: the next generation. First Break, 36, 47–52.
    [Google Scholar]
  11. de Wet, J.A.J. & Hall, D.A. (1994) Interpretation of the Oryx 3‐D seismic survey. In: Anhaeusser, C.R. (ed.) Proceedings XV CMMI Congress: SAIMM Symposium Series, S14, 3, 259–270.
  12. Ding, Y. & Malehmir, A. (2021) Reverse time migration (RTM) imaging of iron oxide deposits in the Ludvika mining area, Sweden. Solid Earth, 12, 1707–1718.
    [Google Scholar]
  13. Dondurur, D. (2018) Acquisition and processing of marine seismic data. Amsterdam: Elsevier.
    [Google Scholar]
  14. Durrheim, R.J. & Maccelari, M.J. (1991) Seismic exploration for preciousmetals in the hard rock environment: 61st Annual International Meeting, SEG, Expanded Abstracts, 159–162.
  15. Eaton, D.W., Milkereit, B. & Adam, E. (1997) 3‐D seismic exploration: Proceedings of Exploration, 65–78.
  16. Etgen, J., Gray, S.H. & Zhang, Y. (2009) An overview of depth imaging in exploration geophysics. Geophysics, 74(6), WCA5–WCA17.
    [Google Scholar]
  17. Hloušek, F., Hellwig, O. & Buske, S. (2015) Improved structural characterization of the Earth's crust at the German Continental Deep Drilling Site using advanced seismic imaging techniques. Journal of Geophysical Research: Solid Earth, 120, 6943–6959.
    [Google Scholar]
  18. Jones, I.F. (2003) A review of 3D preSDM velocity model building techniques. First Break, 21(3), 45–58.
    [Google Scholar]
  19. Karaev, N.A. & Rabinovich, G.Y. (2000) Ore seismic. Moscow: Geoin‐formmark, 366 (in Russian).
    [Google Scholar]
  20. Malehmir, A., Urosevic, M., Bellefleur, G., Juhlin, C. & Milkereit, B. (2012) Seismic methods in mineral exploration and mine planning. Geophysics, 77, WC1–WC2.
    [Google Scholar]
  21. Milkereit, B., AdamE., BarnesA., Beaudry, C., Pineault, R. & Cinq‐Mars, A. (1992) An application of reflection seismology to mineral exploration in the Matagami area, Abitibi Belt, Quebec. Current Research, Part C, 13–18.
    [Google Scholar]
  22. Naghizadeh, M., Snyder, D., Cheraghi, S., Foster, S., Cilenšek, S., Floreani, E. & Mackie, J. (2019) Acquisition and processing of wider bandwidth seismic data in crystalline crust. Progress with the Metal Earth Project: Minerals, 9, 145. https://doi.org/10.3390/min9030145.
    [Google Scholar]
  23. Nelson, D.R. (1997) Compilation of SHRIMP U‐Pb zircon geochronology data, 1996. Geological Survey of Western Australia, Record 1997/2.
    [Google Scholar]
  24. Pertuz, T., Melehmir, A., Bos, J., Brodic, B., Ding, Y., Kunder, R. & Marsden, P. (2022) Broadband seismic source data acquisition and processing to delineate iron oxide deposits in the Blötberget mine, central Sweden. Geophysical Prospecting, 70, 79–94.
    [Google Scholar]
  25. Pretorius, C.C., Jamison, A.A. & Irons, C. (1989) Seismic exploration in the Witwatersrand Basin, Republic of South Africa. Proceedings Exploration 87, Third Decennial International Conference on Geophysics and Geochemoical Exploration for Minerals and Groundwater. Special Publication, Ontario Geologic Survey, 3, 241–253.
  26. Pretorius, C.C. & Trewick, W.F. (1997) Application of 3D seismics to mine planning at Vaal Reefs Gold Mine, number 10 shaft, Republic of South Africa. Proceedings of Exploration 97: Fourth Decennial International Conf. on Mineral Exploration, Prospect. and Development Assoc. of Canada, 399–408.
  27. Robein, E. (2010) Seismic imaging: a review of the techniques, their principles, merits and limitations (EET 4). Houten: Earthdoc.
    [Google Scholar]
  28. Schetselaar, E.Bellefleur, G. & Hunt, P. (2019) Elucidating the effects of hydrothermal alteration on seismic reflectivity in the footwall of the Lalor Volcanogenic Massive Sulfide Deposit, Snow Lake, Manitoba, Canada. Minerals, 9, 384. https://doi.org/10.3390/min9060384.
    [Google Scholar]
  29. Singh, B., Malinowski, M., Górszczyk, A., Melehmir, A., Buske, S., Sito, Ł. & Marsden, P. (2022) 3D high‐resolution seismic imaging of the iron oxide deposits in Ludvika (Sweden) using full‐waveform inversion and reverse time migration. Solid Earth, 13, 1065–1085.
    [Google Scholar]
  30. Singh, B., Malinowski, M., Hloušek, F., Koivisto, E., Heinonen, S., Hellwig, O. et al. (2019) 3D seismic imaging in the Kylylahti mine area, Eastern Finland: comparison of time versus depth approach. Minerals, 9(5), 305. https://doi.org/10.3390/min9050305.
    [Google Scholar]
  31. Stolz, E., Urosevic, M. & Connors, K. (2004) Reflection seismic surveys at St. Ives gold mine, WA. Preview, 111, 79.
    [Google Scholar]
  32. Swager, C.P. (1997) Tectono‐stratigraphy of late Archaean greenstone terranes in the southern Eastern Goldfields, Western Australia. Precambrian Research, 83, 11–42.
    [Google Scholar]
  33. Tanis, M.C., Shah, H., Watson, P.A., Harrison, M., Yang, S., Lu, L. & Carvill, C. (2006) Diving‐wave refraction tomography and reflection tomography for velocity model building: 76th Annual International Meeting. SEG, Expanded Abstracts, 3340–3344.
  34. Urosevic, M., Stolz, E. & Massey, S. (2005) Seismic exploration of complex mineral deposits – Yilgarn Craton, Western Australia. 67th Conference of European Association of Exploration Geophysics, Madrid, Spain, Z‐99.
  35. Urosevic, M., Kepic, A., Stolz, E. & Juhlin, C. (2007) Seismic exploration of mineral deposits in Yilgarn Craton, Western Australia. Proceedings of Exploration 07: Fifth Decennial International Conference on Mineral Exploration, Toronto, Canada.
  36. Urosevic and Evans . (2007a) Feasibility of seismic methods for imaging gold deposits in Western Australia, M363 project. Report No. 267, Minerals and Energy Research Institute of Western Australia, Report No. 267, 1–99.
  37. Urosevic, M., Bhat, G. & Grochau, M.H. (2012) Targeting nickel sulfide deposits from 3D seismic reflection data at Kambalda, Australia. Geophysics, 77, 123–132.
    [Google Scholar]
  38. Urosevic, M. (2013) What can seismic do for you?, 23rd International Geophysical Conference and Exhibition, Melbourne, Australia.
  39. Urosevic, M., Bona, A., Ziramov, S., Pevzner, R., Kepic, A., Egorov, A. et al. (2017) Seismic for mineral resources – a mainstream method of the future. Proceedings of Exploration 17: Seismic Methods and Exploration Workshop, edited by G. Bellefleur and B. Milkereit.
  40. Witt, W.K., Mason, D.R. & Hammond, D.P. (2009) Archean Karari gold deposit, Eastern Goldfields Province, Western Australia: a monzonite‐associated disseminated gold deposit. Australia Journal of Earth Sciences, 56(8), 1061–1086.
    [Google Scholar]
  41. Woodward, M.J., Nichols, D., Zdraveva, O., Whitfield, P. & Johns, T. (2008) A decade of tomography. Geophysics, 73(5), VE5–VE11.
    [Google Scholar]
  42. Yilmaz, Ö. (2001) Seismic data analysis: processing, inversion, and interpretation of seismic data. Houston, TX: Society of Exploration Geophysicists.
    [Google Scholar]
  43. Zhang, J. & Toksöz, N. (1998) Nonlinear refraction traveltime tomography. Geophysics, 1726–1737.
    [Google Scholar]
  44. Ziramov, S., Dzunic, A. & Urosevic, M. (2015) Kevitsa Ni‐Cu‐PGE deposit, North Finland? A seismic case study. ASEG Extended Abstracts, 2015(1), 1–4.
    [Google Scholar]
  45. Ziramov, S., Kinkela, J. & Urosevic, M. (2016) Neves‐Corvo 3D: a high‐resolution seismic survey at a Mine Camp Scale: Near Surface Geoscience 2016, 22nd European Meeting of Environmental and Engineering Geophysics, Barcelona, Spain, 4–8 September 2016, cp‐495‐00188.
/content/journals/10.1111/1365-2478.13314
Loading
/content/journals/10.1111/1365-2478.13314
Loading

Data & Media loading...

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error