1887
Volume 36, Issue 1
  • E-ISSN: 1365-2117

Abstract

[Abstract

Layer‐bound polygonal fault systems (PFS) are a prevalent feature in fine‐grained sediments across many continental margin basins worldwide, yet their origin remains enigmatic. In this study, we report on the structural characteristics of polygonal faults recently discovered in Middle Miocene mudrocks of the Yinggehai Basin, northern South China Sea. Our data reveal that the polygonal arrays of normal faults, which comprise master faults and minor synthetic/antithetic faults with complex tiers, exhibit either straight or curvilinear traces with frequent orthogonal intersections, forming a highly interconnected fault network. We observe several sub‐circular to elliptical‐shaped depressions that lie above the faulted interval and are filled with syn‐deformation deposits, with the long axis of these depressions aligned sub‐parallel to the structure contour lines. Our findings suggest that the polygonal faults emerged during the sediment deposition and compaction preceding the deposition of overlying sediments. The faults were created through the nucleation of penecontemporaneous faults due to the overloading of sandy sediments onto unconsolidated clays, followed by the propagation of the faults along with continuous sediment deposition. The cessation of fault propagation coincided with the termination of sedimentation in the faulted interval. Additionally, the local horizontal stress anisotropy resulting from topographic‐gravitational effects may have played a crucial role in the development of polygonal faults. Our study provides novel insights into early sediment deformations in the northern South China Sea region and sheds light on the timing and genesis of PFS.

,

Enriched sands close to the point with the maximum fault throw as domonstrated by RMS amplitude

]
Loading

Article metrics loading...

/content/journals/10.1111/bre.12853
2024-02-10
2025-05-24
Loading full text...

Full text loading...

References

  1. Anka, Z., Berndt, C., & Gay, A. (2012). Hydrocarbon leakage through focused fluid flow systems in continental margins. Marine Geology, 332‐334, 1–3.
    [Google Scholar]
  2. Berndt, C., Bünz, S., & Mienert, J. (2003). Polygonal fault systems on the mid‐Norwegian margin: A long‐term source for fluid flow. Geological Society London Special Publications, 216, 283–290.
    [Google Scholar]
  3. Berndt, C., Jacobs, C., Evans, A., Gay, A., Elliott, G., Long, D., & Hitchen, K. (2012). Kilometre‐scale polygonal seabed depressions in the Hatton Basin, NE Atlantic Ocean: Constraints on the origin of polygonal faulting. Marine Geology, 332, 126–133.
    [Google Scholar]
  4. Boudon, C., & Cartwright, J. (2008). Early stage evolution of growth faults: 3D seismic insights from the Levant Basin, eastern Mediterranean. Journal of Structural Geology, 30, 888–898.
    [Google Scholar]
  5. Bureau, D., Mourgues, R., Cartwright, J., Foschi, M., & Abdelmalak, M. (2013). Characterisation of interactions between a pre‐existing polygonal fault system and sandstone intrusions and the determination of paleo‐stresses in the Faroe‐Shetland basin. Journal of Structural Geology, 46, 186–199.
    [Google Scholar]
  6. Carruthers, D., Cartwright, J., Jackson, M. P., & Schutjens, P. (2013). Origin and timing of layer‐bound radial faulting around North Sea salt stocks: New insights into the evolving stress state around rising diapirs. Marine and Petroleum Geology, 48, 130–148.
    [Google Scholar]
  7. Cartwright, J. (2007). The impact of 3D seismic data on the understanding of compaction, fluid flow and diagenesis in sedimentary basins. Journal of the Geological Society, 164, 881–893.
    [Google Scholar]
  8. Cartwright, J. (2011). Diagenetically induced shear failure of fine‐grained sediments and the development of polygonal fault systems. Marine and Petroleum Geology, 28, 1593–1610.
    [Google Scholar]
  9. Cartwright, J., Huuse, M., & Aplin, A. (2007). Seal bypass systems. AAPG Bulletin, 91, 1141–1166.
    [Google Scholar]
  10. Cartwright, J., & Lonergan, L. (1996). Volumetric contraction during the compaction of mudrocks: A mechanism for the development of regional‐scale polygonal fault systems. Basin Research, 8, 183–193.
    [Google Scholar]
  11. Cartwright, J., Wattrus, N., Rausch, D., & Bolton, A. (2004). Recognition of an early Holocene polygonal fault system in Lake Superior: Implications for the compaction of fine‐grained sediments. Geology, 32, 253–256.
    [Google Scholar]
  12. Cartwright, J. A. (1994a). Episodic basin‐wide fluid expulsion from geopressured shale sequences in the North Sea basin. Geology, 22, 447–450.
    [Google Scholar]
  13. Cartwright, J. A. (1994b). Episodic basin‐wide hydrofracturing of overpressured Early Cenozoic mudrock sequences in the North Sea Basin. Marine and Petroleum Geology, 11, 587–607.
    [Google Scholar]
  14. Cartwright, J. T., & Dewhurst, D. (1998). Layer‐bound compaction faults in fine‐grained sediments. Geological Society of America Bulletin, 110, 1242–1257.
    [Google Scholar]
  15. Chen, Y., Zhang, D., Huang, C., Zhang, J., & Wang, Y. (2019). Controlling factors and sedimentary characteristics of the large submarine fan in Meishan Formation in the south parts of the Yingdong Slope Area, Yinggehai Basin. Journal of Northeast Petroleum University, 43, 40–79.
    [Google Scholar]
  16. Chopra, S., & Marfurt, K. J. (2008). Emerging and future trends in seismic attributes. The Leading Edge, 27, 298–318.
    [Google Scholar]
  17. Davies, R., Ireland, M., & Cartwright, J. (2009). Differential compaction due to the irregular topology of a diagenetic reaction boundary: A new mechanism for the formation of polygonal faults. Basin Research, 21, 354–359.
    [Google Scholar]
  18. Davies, R. J. (2005). Differential compaction and subsidence in sedimentary basins due to silica diagenesis: A case study. Geological Society of America Bulletin, 117, 1146–1155.
    [Google Scholar]
  19. Davies, R. J., & Ireland, M. T. (2011). Initiation and propagation of polygonal fault arrays by thermally triggered volume reduction reactions in siliceous sediment. Marine Geology, 289, 150–158.
    [Google Scholar]
  20. Dewhurst, D. N., Cartwright, J. A., & Lonergan, L. (1999). The development of polygonal fault systems by syneresis of colloidal sediments. Marine and Petroleum Geology, 16, 793–810.
    [Google Scholar]
  21. Dumke, I., Berndt, C., Crutchley, G. J., Krause, S., Liebetrau, V., Gay, A., & Couillard, M. (2014). Seal bypass at the Giant Gjallar Vent (Norwegian Sea): Indications for a new phase of fluid venting at a 56‐Ma‐old fluid migration system. Marine Geology, 351, 38–52.
    [Google Scholar]
  22. Gay, A., & Berndt, C. (2007). Cessation/reactivation of polygonal faulting and effects on fluid flow in the Vøring Basin, Norwegian Margin. Journal of the Geological Society, 164, 129–141.
    [Google Scholar]
  23. Gay, A., Lopez, M., Cochonat, P., Séranne, M., Levaché, D., & Sermondadaz, G. (2006). Isolated seafloor pockmarks linked to BSRs, fluid chimneys, polygonal faults and stacked Oligocene–Miocene turbiditic palaeochannels in the Lower Congo Basin. Marine Geology, 226, 25–40.
    [Google Scholar]
  24. Gay, A., Lopez, M., Cochonat, P., & Sermondadaz, G. (2004). Polygonal faults‐furrows system related to early stages of compaction–upper Miocene to recent sediments of the Lower Congo Basin. Basin Research, 16, 101–116.
    [Google Scholar]
  25. Gay, A., Mourgues, R., Berndt, C., Bureau, D., Planke, S., Laurent, D., Gautier, S., Lauer, C., & Loggia, D. (2012). Anatomy of a fluid pipe in the Norway Basin: Initiation, propagation and 3D shape. Marine Geology, 332, 75–88.
    [Google Scholar]
  26. Gay, A., Padron, C., Meyer, S., Beaufort, D., Oliot, E., Lallemand, S., Marcaillou, B., Philippon, M., Cornée, J. J., & Audemard, F. (2021). Elongated giant seabed polygons and underlying polygonal faults as indicators of the creep deformation of Pliocene to recent sediments in the Grenada Basin, Caribbean Sea. Geochemistry, Geophysics, Geosystems, 22, e2021GC009809.
    [Google Scholar]
  27. Goulty, N. (2002). Mechanics of layer‐bound polygonal faulting in fine‐grained sediments. Journal of the Geological Society, 159, 239–246.
    [Google Scholar]
  28. Goulty, N. (2008). Geomechanics of polygonal fault systems: A review. Petroleum Geoscience, 14, 389–397.
    [Google Scholar]
  29. Hao, F., Li, S., Gong, Z., & Yang, J. (2000). Thermal regime, interreservoir compositional heterogeneities, and reservoir‐filling history of the Dongfang gas field, Yinggehai Basin, South China Sea: Evidence for episodic fluid injections in overpressured basins?AAPG Bulletin, 84, 607–626.
    [Google Scholar]
  30. Hao, F., Li, S., Gong, Z., & Yang, J. (2002). Mechanism of diapirism and episodic fluid injections in the Yinggehai Basin. Science China Earth Sciences, 45, 151–159.
    [Google Scholar]
  31. Ho, S., Hovland, M., Blouet, J., Wetzel, A., Imbert, P., & Carruthers, D. (2018). Formation of linear planform chimneys controlled by preferential hydrocarbon leakage and anisotropic stresses in faulted fine‐grained sediments, offshore Angola. Solid Earth, 9, 1437–1468.
    [Google Scholar]
  32. Hoffmann, J. J., Gorman, A. R., & Crutchley, G. J. (2019). Seismic evidence for repeated vertical fluid flow through polygonally faulted strata in the Canterbury Basin, New Zealand. Marine and Petroleum Geology, 109, 317–329.
    [Google Scholar]
  33. Huang, B., Xiao, X., & Dong, W. (2002). Multiphase natural gas migration and accumulation and its relationship to diapir structures in the DF1‐1 gas field, South China Sea. Marine and Petroleum Geology, 19, 861–872.
    [Google Scholar]
  34. Huang, B., Xiao, X., & Zhu, W. (2004). Geochemistry, origin, and accumulation of CO2 in natural gases of the Yinggehai Basin, offshore South China Sea. AAPG Bulletin, 88, 1277–1293.
    [Google Scholar]
  35. Huang, Y., Yao, G., & Fan, X. (2019). Sedimentary characteristics of shallow‐marine fans of the Huangliu Formation in the Yinggehai Basin, China. Marine and Petroleum Geology, 110, 403–419.
    [Google Scholar]
  36. Hustoft, S., Mienert, J., Bünz, S., & Nouzé, H. (2007). High‐resolution 3D‐seismic data indicate focussed fluid migration pathways above polygonal fault systems of the mid‐Norwegian margin. Marine Geology, 245, 89–106.
    [Google Scholar]
  37. Ireland, M. T., Goulty, N. R., & Davies, R. J. (2010). Influence of pore water chemistry on silica diagenesis: Evidence from the interaction of diagenetic reaction zones with polygonal fault systems. Journal of the Geological Society, 167, 273–279.
    [Google Scholar]
  38. Ireland, M. T., Goulty, N. R., & Davies, R. J. (2011). Influence of stratigraphic setting and simple shear on layer‐bound compaction faults offshore Mauritania. Journal of Structural Geology, 33, 487–499.
    [Google Scholar]
  39. Jiao, X., Luo, Q., Zhang, J., Chen, Y., & Liu, W. (2021). Sedimentary characteristics and controlling factors of submarine fan in Meishan Formation of Yinggehai Sag. Journal of Chongqing University of Science and Technology, 23, 35–39.
    [Google Scholar]
  40. Jin, Y., Fan, C., Fu, X., Meng, L., Liu, B., Jia, R., Cao, S., Du, R., Li, H., & Tan, J. (2021). Risk analysis of natural hydraulic fracturing in an overpressured basin with mud diapirs: A case study from the Yinggehai Basin, South China sea. Journal of Petroleum Science and Engineering, 196, 107621.
    [Google Scholar]
  41. Leila, M., Moscariello, A., & Egvi, B. (2017). Depositional facies controls on the diagenesis and reservoir quality of the Messinian Qawasim and Abu Madi formations, onshore Nile Delta, Egypt. Geological Journal, 54, 1115–1813.
    [Google Scholar]
  42. Lonergan, L., Cartwright, J., & Jolly, R. (1998). The geometry of polygonal fault systems in Tertiary mudrocks of the North Sea. Journal of Structural Geology, 20, 529–548.
    [Google Scholar]
  43. Luo, X., Dong, W., Yang, J., & Yang, W. (2003). Overpressuring mechanisms in the Yinggehai Basin, South China Sea. AAPG Bulletin, 87, 629–645.
    [Google Scholar]
  44. Meng, Q., Hao, F., & Tian, J. (2021). Origins of non‐tectonic fractures in shale. Earth‐Science Reviews, 222, 103825.
    [Google Scholar]
  45. Morgan, D., Cartwright, J., & Imbert, P. (2015). Perturbation of polygonal fault propagation by buried pockmarks and the implications for the development of polygonal fault systems. Marine and Petroleum Geology, 65, 157–171.
    [Google Scholar]
  46. Moss, J., & Cartwright, J. (2010). The spatial and temporal distribution of pipe formation, offshore Namibia. Marine and Petroleum Geology, 27, 1216–1234.
    [Google Scholar]
  47. Potter, P. E., Maynard, J. B., & Depetris, P. J. (2005). Mud and mudstones: Introduction and overview. Springer Science & Business Media.
    [Google Scholar]
  48. Seebeck, H., Tenthorey, E., Consoli, C., & Nicol, A. (2015). Polygonal faulting and seal integrity in the Bonaparte Basin, Australia. Marine and Petroleum Geology, 60, 120–135.
    [Google Scholar]
  49. Shin, H., Santamarina, J. C., & Cartwright, J. A. (2008). Contraction‐driven shear failure in compacting uncemented sediments. Geology, 36, 931–934.
    [Google Scholar]
  50. St‐Onge, A. (2017). A Late Cretaceous polygonal fault system in central North America. Geological Society of America Bulletin, 129, 582–593.
    [Google Scholar]
  51. Sun, Z., Zhou, D., Zhong, Z., Zeng, Z., & Wu, S. (2003). Experimental evidence for the dynamics of the Formation of the Yinggehai basin, NW South China Sea. Tectonophysics, 372, 41–58.
    [Google Scholar]
  52. Tewksbury, B. J., Hogan, J. P., Kattenhorn, S. A., Mehrtens, C. J., & Tarabees, E. A. (2014). Polygonal faults in chalk: Insights from extensive exposures of the Khoman formation, Western Desert, Egypt. Geology, 42, 479–482.
    [Google Scholar]
  53. Verschuren, M. (2019). Outcrop evidence of polygonal faulting in Ypresian marine clays (Southern North Sea Basin) leads to a new synthesis. Marine Geology, 413, 85–98.
    [Google Scholar]
  54. Volpi, V., Camerlenghi, A., Hillenbrand, C. D., Rebesco, M., & Ivaldi, R. (2003). Effects of biogenic silica on sediment compaction and slope stability on the Pacific margin of the Antarctic Peninsula. Basin Research, 15, 339–363.
    [Google Scholar]
  55. Wang, Z., Gao, J., Wang, D., & Wei, Q. (2015). 3D seismic attributes for a tight gas sand reservoir characterization of the eastern Sulige gas field, Ordos Basin, China. Geophysics, 80, B35–B43.
    [Google Scholar]
  56. Watterson, J., Walsh, J., Nicol, A., Nell, P., & Bretan, P. (2000). Geometry and origin of a polygonal fault system. Journal of the Geological Society, 157, 151–162.
    [Google Scholar]
  57. Weinberger, R. (1999). Initiation and growth of cracks during desiccation of stratified muddy sediments. Journal of Structural Geology, 21, 379–386.
    [Google Scholar]
  58. Wrona, T., Magee, C., Jackson, C., Huuse, M., & Taylor, K. (2017). Kinematics of polygonal fault systems: Observations from the northern North Sea. Frontiers in Earth Science, 5, 101.
    [Google Scholar]
  59. Yang, K., He, S., Yang, Z., Wang, M., Zhang, R., Ren, S., Zhao, X., & Yao, G. (2023). Diagenesis characteristics of tight sandstone reservoirs with high temperature, overpressure and high CO2 content: A case study of Neogene Meishan‐ Huangliu Formation in LD10 area, Yinggehai Basin. Lithologic Reservoirs, 35, 83–95.
    [Google Scholar]
/content/journals/10.1111/bre.12853
Loading
/content/journals/10.1111/bre.12853
Loading

Data & Media loading...

  • Article Type: Research Article
Keyword(s): mudrock; polygonal fault; South China Sea; Yinggehai Basin

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error