1887
Volume 58, Issue 5
  • E-ISSN: 1365-2478

Abstract

ABSTRACT

Monitoring of induced seismicity is gaining importance in a broad range of industrial operations from hydrocarbon reservoirs to mining to geothermal fields. Such passive seismic monitoring mainly aims at identifying fractures, which is of special interest for safety and productivity reasons. By analysing shear‐wave splitting it is possible to determine the anisotropy of the rock, which may be caused by sedimentary layering and/or aligned fractures, which in turn offers insight into the state of stress in the reservoir. We present a workflow strategy for automatic and effective processing of passive microseismic data sets, which are ever increasing in size. The automation provides an objective quality control of the shear‐wave splitting measurements and is based on characteristic differences between the two independent eigenvalue and cross‐correlation splitting techniques. These differences are summarized in a quality index for each measurement, allowing identification of an appropriate quality threshold. Measurements above this threshold are considered to be of good quality and are used in further interpretation. We suggest an automated inversion scheme using rock physics theory to test for best correlation of the data with various combinations of fracture density, its strike and the background anisotropy. This fully automatic workflow is then tested on a synthetic and a real microseismic data set.

Loading

Article metrics loading...

/content/journals/10.1111/j.1365-2478.2010.00891.x
2010-05-04
2024-04-20
Loading full text...

Full text loading...

References

  1. AbtD.L. and FischerK.M.2008. Resolving three‐dimensional anisotropic structure with shear wave splitting tomography. Geophysical Journal International173, 859–886.
    [Google Scholar]
  2. Al‐AnbooriA., KendallJ.M., RaymerD. and JonesR.2005. Microseismic monitoring and spatial variations in anisotropy, an example from Oman. 67th EAGE meeting, Madrid , Spain , Expanded Abstracts.
  3. Al‐HarrasiO., WuestefeldA. and KendallJ.M.2009. Towards a fully automated shear‐wave splitting analysis of microseismic data. 71st EAGE meeting, Amsterdam , the Netherlands , Expanded Abstracts.
  4. AndoM., IshikawaY. and WadaH.1980. S‐wave anisotropy in the upper mantle under a volcanic area in Japan. Nature286, 43–46.
    [Google Scholar]
  5. BackusG.E.1962. Long‐wave elastic anisotropy produced by horizontal layering. Journal of Geophysical Research67, 4427–4440.
    [Google Scholar]
  6. BokelmannG.H.R. and BaischS.1999. Nature of narrow‐band signals at 2.083 Hz. Bulletin of the Seismological Society of America89, 156–164.
    [Google Scholar]
  7. BrownL. and GurevichB.2004. Frequency‐dependent seismic anisotropy of porous rocks with penny‐shaped cracks. Exploration Geophysics35, 111–115.
    [Google Scholar]
  8. ButlerK.E. and RussellyR.D.2003. Cancellation of multiple harmonic noise series in geophysical records. Geophysics68, 1083–1090.
    [Google Scholar]
  9. ChapmanM.2003. Frequency‐dependent anisotropy due to meso‐scale fractures in the presence of equant porosity. Geophysical Prospecting51, 369–379.
    [Google Scholar]
  10. ChevrotS.2000. Multichannel analysis of shear wave splitting. Journal of Geophysical Research105, 21579–21590.
    [Google Scholar]
  11. CrampinS.1984. Effective anisotropic elastic constants for wave propagation through cracked solids. Geophysical Journal of the Royal Astronomical Society76, 135–145.
    [Google Scholar]
  12. CrampinS. and PeacockS.2008. A review of the current understanding of seismic shear‐wave splitting in the Earth's crust and common fallacies in interpretation. Wave Motion45, 675–722.
    [Google Scholar]
  13. DrickerI., VinnikL., RoeckerS. and MakeyevaL.1999. Upper mantle flow in eastern Europe. Geophysical Research Letters26, 1219–1222.
    [Google Scholar]
  14. DyerB.C., JonesR.H., CowlesJ.F., BarkvedO.I. and FolstadP.G.1999. Microseismic survey of a North Sea reservoir. World Oil220, 74–79.
    [Google Scholar]
  15. EisnerL., DuncanP.M., HeiglW.M. and KellerW.R.2009. Uncertainties in passive seismic monitoring. The Leading Edge28, 648–655.
    [Google Scholar]
  16. ElkibbiM. and RialJ.A.2005. The Geysers geothermal field: Results from shear‐wave splitting analysis in a fractured reservoir. Geophysical Journal International162, 1024–1035.
    [Google Scholar]
  17. EvansM.S., KendallJ.‐M. and WillemannR.J.2006. Automated SKS splitting and upper‐mantle anisotropy beneath Canadian seismic stations. Geophysical Journal International165, 931–942.
    [Google Scholar]
  18. FukaoY.1984. Evidence from core‐reflected shear waves for anisotropy in the Earth's mantle. Nature309, 695–698.
    [Google Scholar]
  19. GalvinR.J.GurevichB. and SayersC.M.2007. Fluid‐dependent shear‐wave splitting in a poroelastic medium with conjucate fracture sets. Geophysical Prospecting55, 333–343.
    [Google Scholar]
  20. GaoY., HaoP. and CrampinS.2006. SWAS: A shear‐wave analysis system for semi‐automatic measurement of shear‐wave splitting above small earthquakes. Physics of the Earth and Planetary Interior159, 71–89.
    [Google Scholar]
  21. GibowiczS.J. and KijkoA.1994. An Introduction to Mining Seismology . Academic Press. ISBN 0122821203.
    [Google Scholar]
  22. GuestS., Van Der KolkC. and PottersH.1998. The effect of fracture filling fluids on shear‐wave propagation. 69th SEG meeting, New Orleans , Louisiana , USA , Expanded Abstracts, 948–951.
  23. HallS.A., KendallJ.‐M., MaddockJ. and FisherQ.2008. Crack density tensor inversion for analysis of changes in rock frame architecture. Geophysical Journal International173, 577–592.
    [Google Scholar]
  24. HessH.H.1964. Seismic anisotropy of the uppermost mantle under oceans. Nature203, 629–631.
    [Google Scholar]
  25. HolmesG.M., CrampinS. and YoungR.P.2000. Seismic anisotropy in granite at the Underground Research Laboratory, Manitoba. Geophysical Prospecting48, 415–435.
    [Google Scholar]
  26. HudsonJ.A.1981. Wave speeds and attenuation of elastic waves in material containing cracks. Geophysical Journal of the Royal Astronomical Society64, 133–150.
    [Google Scholar]
  27. JonesG.A., RaymerD., ChambersK. and KendallJ.M.2010. Improved microseismic event location by inclusion of a priori dip particle motion: A case study from Ekofisk. Geophysical Prospecting (in press).
    [Google Scholar]
  28. JurkevicsA.1988. Polarization analysis of three‐component array data. Bulletin of the Seismological Society of America78, 1725–1743.
    [Google Scholar]
  29. KaarsbergE.A.1968. Elasticity studies of isotropic and anisotropic rock. Transactions of the Society of Mining Engineering241, 470–475.
    [Google Scholar]
  30. KendallJ.M.1994. Teleseismic arrivals at a mid‐ocean ridge: Effect of mantle melt and anisotropy. Geophysical Research Letters21, 301–304.
    [Google Scholar]
  31. KendallJ.‐M., FisherQ. J., Covey‐CrumpS., MaddockJ., CarterA., HallS.A., et al . 2007. Seismic anisotropy as an indicator of reservoir quality in siliciclastic rocks. In: Structurally Complex Reservoirs (eds S.Jolley , D.Barr , J.Walsh and R.J.Knipe ), pp. 123–136. Geological Society, London .
    [Google Scholar]
  32. KendallJ.‐M., PilidouS., KeirD., BastowI.D., StuartG.W. and AyeleA.2006. The Afar volcanic province within the East African rift system. In: Mantle Upwellings, Melt Migration and the Rifting of Africa: Insights from Seismic Anisotropy (eds G.Yirgu , C.J.Ebinger and P.K.H.Maguire ), pp. 55–72. Geological Society, London .
    [Google Scholar]
  33. LiuE., CrampinS., QueenJ. and RizerW.1993. Behaviour of shear waves in rocks with two sets of parallel cracks. Geophysical Journal International113, 509–517.
    [Google Scholar]
  34. LiuE., ChapmanM., ZhangZ. and QueenJ.H.2006. Frequency‐dependent anisotropy: effects of multiple fracture sets on shear‐wave polarisations. Wave Motion44, 44–57.
    [Google Scholar]
  35. LongM.D. and Van Der HilstR.D.2005. Estimating shear‐wave splitting parameters from broadband recordings in Japan: A comparison of three methods. Bulletin of the Seismological Society of America95, 1346–1358.
    [Google Scholar]
  36. MainpriceD. and SilverP.G.1993. Interpretation of SKS‐waves using samples from the subcontinental lithosphere. Physics of the Earth and Planetary Interiors78, 257–280.
    [Google Scholar]
  37. Marson‐PidgeonK. and SavageM.1997. Frequency‐dependent anisotropy in Wellington, New Zealand. Geophysical Research Letters24, 3297–3300.
    [Google Scholar]
  38. MaultzschS., ChapmanM., LiuE. and LiX.2003. Modelling frequency‐dependent seismic anisotropy in fluid‐saturated rock with aligned fractures: Implication of fracture size estimation from anisotropic measurements. Geophysical Prospecting51, 381–392.
    [Google Scholar]
  39. MenkeW. and LevinV.2003. The cross‐convolution method for interpreting SKS splitting observations, with application to one and two‐layer anisotropic earth models. Geophysical Journal International154, 379–392.
    [Google Scholar]
  40. NicolasA. and ChristensenN.I.1987. Formation of anisotropy in upper mantle peridotites – A review. In: Composition Structure and Dynamics of the Lithosphere Asthenosphere System (eds K.Fuchs and C.Froideveaux ), pp. 111–123. AGU.
    [Google Scholar]
  41. O’ConnellR.J. and BudianskyB.1974. Seismic velocities in dry and saturated cracked solids. Journal of Geophysical Research193, 3339–3356.
    [Google Scholar]
  42. PointerT., LiuE. and HudsonJ.A.2000. Seismic wave propagation in cracked porous media. Geophysical Journal International142, 199–231.
    [Google Scholar]
  43. RestivoA. and HelffrichG.1999. Teleseismic shear wave splitting measurements in noisy environments. Geophysical Journal International137, 821–830.
    [Google Scholar]
  44. SavageM.K.1999. Seismic anisotropy and mantle deformation: What have we learned from shear wave splitting. Reviews of Geophysics37, 69–106.
    [Google Scholar]
  45. SilenyJ. and PlomerovaJ.1996. Inversion of shear‐wave splitting parameters to retrieve three‐dimensional orientation of anisotropy in continental lithosphere. Physics of the Earth and Planetary Interiors95, 277–292.
    [Google Scholar]
  46. SilverP.G. and ChanW.W.1991. Shear wave splitting and subcontinental mantle deformation. Journal of Geophysical Research96, 16429–16454.
    [Google Scholar]
  47. TeanbyN.A., KendallJ.‐M. and Van Der BaanM.2004a. Automation of shear‐wave splitting measurements using cluster analysis. Bulletin of the Seismological Society of America94, 453–463.
    [Google Scholar]
  48. TeanbyN.A., KendallJ.‐M., JonesR.H. and BarkvedO.2004b. Stress‐induced temporal variations in seismic anisotropy observed in microseismic data. Geophysical Journal International156, 459–466.
    [Google Scholar]
  49. ThomsenL.1986. Weak elastic anisotropy. Geophysics10, 1954–1966.
    [Google Scholar]
  50. ThomsenL.1995. Elastic anisotropy due to aligned cracks in porous rock. Geophysical Prospecting43, 805–829.
    [Google Scholar]
  51. ValckeS.L.A., CaseyM., LloydG.E., KendallJ.‐M. and FisherQ.J.2006. Lattice preferred orientation and seismic anisotropy in sedimentary rocks. Geophysical Journal International166, 652–666.
    [Google Scholar]
  52. VecseyL., PlomerováJ., KozlovskayaE. and BabuskaV.2007. Shear wave splitting as a diagnostic of variable anisotropic structure of the upper mantle beneath central Fennoscandia. Tectonophysics438, 57–77.
    [Google Scholar]
  53. VegaS., MavkoG., PrasadM. and NurA.2006. Detection of stress‐induced velocity anisotropy in unconsolidated sands. The Leading Edge25, 252–256.
    [Google Scholar]
  54. VerdonJ.P., AngusD.A., KendallJ.M. and HallS.A.2008. The effect of microstructure and nonlinear stress on anisotropic seismic velocities. Geophysics73, D41–D51.
    [Google Scholar]
  55. VerdonJ., KendallJ.‐M. and WuestefeldA.2009. Imaging fractures and sedimentary fabrics using shear wave splitting measurements made on passive seismic data. Geophysical Journal International179, 1245–1254.
    [Google Scholar]
  56. VidaleJ.E.1986. Complex polarisation of particle motion. Bulletin of the Seismological Society of America71, 1511–1530.
    [Google Scholar]
  57. VinnikL.P., KindR., MakeyevaL.I. and KosarevG.L.1989. Azimuthal anisotropy in the lithosphere from observations of long‐period S‐waves. Geophysical Journal International99, 549–559.
    [Google Scholar]
  58. WolfeC.J. and SilverP.G.1998. Seismic anisotropy of oceanic upper mantle: Shear wave splitting methodologies and observations. Journal of Geophysical ResearchB1, 749–771.
    [Google Scholar]
  59. WuestefeldA.2007. Methods and applications of shear‐wave‐splitting: The East European craton . PhD thesis, University Montpellier II, France .
  60. WuestefeldA. and BokelmannG.2007. Null detection in shear‐wave splitting measurements. Bulletin of the Seismological Society of America97, 1204–1211.
    [Google Scholar]
  61. WuestefeldA., BokelmannG., ZaroliC. and BarruolG.2008. SplitLab: A shear‐wave splitting environment in Matlab. Computers and Geosciences34, 515–528.
    [Google Scholar]
  62. ZatsepinS.V. and CrampinS.1997. Modelling of the compliance of crustal rock: I – Response of shear‐wave splitting to differential stress. Geophysical Journal International129, 477–494.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/j.1365-2478.2010.00891.x
Loading
/content/journals/10.1111/j.1365-2478.2010.00891.x
Loading

Data & Media loading...

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error