1887
Volume 31, Issue 1
  • ISSN: 1354-0793
  • E-ISSN:

Abstract

Fault permeability prediction typically relies on empirical relationships between permeability and clay content or burial depth. Calibration of such methods relies on either core data or subsurface observations of fluid pressure and hydrocarbon contact offsets across faults. Published core data suggest that no relationships exist between host rock clay content and fault permeability for phyllosilicate-framework fault rocks, whereas published subsurface calibration data suggest otherwise. We here present a new method for calibration of fault rock permeabilities to subsurface pressure data. This approach is an analogue from electrical engineering to compute fault permeabilities across all major faults in a study area and optimize depth and clay content dependence of fault permeabilities. We tested this method at the Jurassic section of the Norwegian Njord Field area, where faults span the depth range of 2.4–4.5 km and the lowest clay content in individual faults varies between 8.9 to 25.7%. The flow-restricting faults at Njord are phyllosilicate-framework fault rocks. Our modelling shows that fault rock permeability decreases with burial depth, whereas the clay content has nearly no impact. Sensitivity analyses show that these results are robust. Therefore, SGR-based algorithms for fault seal prediction cannot be expected to give good fault permeability predictions for seismic-scale faults at Njord.

Loading

Article metrics loading...

/content/journals/10.1144/petgeo2023-025
2025-04-16
2026-02-13
Loading full text...

Full text loading...

References

  1. Aplin, A.C. and Larter, S.R.2005. Fluid Flow, Pore Pressure, Wettability, and Leakage in Mudstone Cap Rocks. AAPG Special Volumes.
    [Google Scholar]
  2. Ballas, G., Fossen, H. and Soliva, R. 2015. Factors controlling permeability of cataclastic deformation bands and faults in porous sandstone reservoirs. Journal of Structural Geology, 76, 1–21, doi: 10.1016/j.jsg.2015.03.01310.1016/j.jsg.2015.03.013
    https://doi.org/10.1016/j.jsg.2015.03.013 [Google Scholar]
  3. Bell, R.E., Jackson, C.A.-L., Elliott, G.M., Gawthorpe, R.L., Sharp, I.R. and Michelsen, L. 2014. Insights into the development of major rift-related unconformities from geologically constrained subsidence modelling: Halten Terrace, offshore mid Norway. Basin Research, 26, 203–224, doi: 10.1111/bre.1204910.1111/bre.12049
    https://doi.org/10.1111/bre.12049 [Google Scholar]
  4. Bouvier, J.D. and Kaars-Sijp, C.H. 1989. Three-dimensional seismic interpretation and fault sealing investigations, Nun River Field, Nigeria. AAPG Bulletin, 73, 1397–1414, doi: 10.1306/44B4AA5A-170A-11D7-8645000102C1865D10.1306/44B4AA5A‑170A‑11D7‑8645000102C1865D
    https://doi.org/10.1306/44B4AA5A-170A-11D7-8645000102C1865D [Google Scholar]
  5. Bretan, P., Yielding, G. and Jones, H. 2003. Using calibrated shale gouge ratio to estimate hydrocarbon column heights. AAPG Bulletin, 87, 397–413, doi: 10.1306/0801020112810.1306/08010201128
    https://doi.org/10.1306/08010201128 [Google Scholar]
  6. Cerveny, K., Davies, R., Dudley, G., Fox, R., Kaufman, P., Knipe, R.J. and Krantz, B. 2004. Reducing uncertainty with fault-seal analysis. Oilfield v.16, 38–51.
    [Google Scholar]
  7. Childs, C., Walsh, J.J. et al.2007. Definition of a fault permeability predictor from outcrop studies of a faulted turbidite sequence, Taranaki, New Zealand. Geological Society, London, Special Publications, 292, 235–258, doi: 10.1144/SP292.1410.1144/SP292.14
    https://doi.org/10.1144/SP292.14 [Google Scholar]
  8. Curry, H.B. 1944. The method of steepest descent for non-linear minimization problems. Quarterly of Applied Mathematics, 2, 258–261, doi: 10.1090/qam/1066710.1090/qam/10667
    https://doi.org/10.1090/qam/10667 [Google Scholar]
  9. Dalland, A., Augedahl, H.O., Bomstad, K., Ofstad, K and Worsley, D. 1988. The post-Triassic succession of the mid-Norwegian shelf. In: Dalland, A. et al. (eds) Norwegian Petroleum Directorate Bulletin No 4: A lithostratigraphic scheme for the Mesozoic and Cenozoic succession offshore Mid-and northern Norway, 5–42.
    [Google Scholar]
  10. Elliott, G.M., Wilson, P., Jackson, C.A.-L., Gawthorpe, R.L., Michelsen, L. and Sharp, I.R. 2012. The linkage between fault throw and footwall scarp erosion patterns: an example from the Bremstein Fault Complex, offshore Mid-Norway. Basin Research, 24, 180–197, doi: 10.1111/j.1365-2117.2011.00524.x10.1111/j.1365‑2117.2011.00524.x
    https://doi.org/10.1111/j.1365-2117.2011.00524.x [Google Scholar]
  11. Fisher, Q.J. and Knipe, R.J. 1998. Fault sealing processes in siliciclastic sediments. Geological Society, London, Special Publications, 147, 117–134, doi: 10.1144/GSL.SP.1998.147.01.0810.1144/GSL.SP.1998.147.01.08
    https://doi.org/10.1144/GSL.SP.1998.147.01.08 [Google Scholar]
  12. Fisher, Q.J. and Knipe, R.J. 2001. The permeability of faults within siliciclastic petroleum reservoirs of the North Sea and Norwegian Continental Shelf. Marine and Petroleum Geology, 18, 1063–1081, doi: 10.1016/s0264-8172(01)00042-310.1016/s0264‑8172(01)00042‑3
    https://doi.org/10.1016/s0264-8172(01)00042-3 [Google Scholar]
  13. Fisher, Q.J., Casey, M., Harris, S.D. and Knipe, R.J. 2003. Fluid-flow properties of faults in sandstone: the importance of temperature history. Geology, 31, 965, doi: 10.1130/G19823.110.1130/G19823.1
    https://doi.org/10.1130/G19823.1 [Google Scholar]
  14. Fossen, H.2020. Fault classification, fault growth and displacement. In: Scarselli, N. et al. (eds) Regional Geology and Tectonics: Principles of Geologic Analysis. Elsevier, 119–147.
    [Google Scholar]
  15. Fossen, H. and Bale, A. 2007. Deformation bands and their influence on fluid flow. AAPG Bulletin, 91, 1685–1700, doi: 10.1306/0730070614610.1306/07300706146
    https://doi.org/10.1306/07300706146 [Google Scholar]
  16. Freeman, S.R., Harris, S.D. and Knipe, R.J. 2010. Cross-fault sealing, baffling and fluid flow in 3D geological models: tools for analysis, visualization and interpretation. Geological Society, London, Special Publications, 347, 257–282, doi: 10.1144/SP347.1510.1144/SP347.15
    https://doi.org/10.1144/SP347.15 [Google Scholar]
  17. Fulljames, J.R., Zijerveld, L. and Franssen, R.1997. Fault seal processes: systematic analysis of fault seals over geological and production time scales. In: Møller-Pedersen, P. and Koestler, A.G. (eds) Norwegian Petroleum Society Special Publications Hydrocarbon Seals. Elsevier, 7, 51–59.
    [Google Scholar]
  18. Hermanrud, C., Cao, S. and Lerche, I. 1990. Estimates of virgin rock temperature derived from BHT measurements: bias and error. Geophysics, 55, 924–931, doi: 10.1190/1.144290810.1190/1.1442908
    https://doi.org/10.1190/1.1442908 [Google Scholar]
  19. Hermanrud, C., Wensaas, L., Teige, G., Nordgård Bolås, H., Hansen, S. and Vik, E.1998. Memoir 70, Chapter 4: Shale Porosities from Well Logs on Haltenbanken (Offshore Mid-Norway) Show No Influence of Overpressuring. AAPG Special Volumes.
    [Google Scholar]
  20. Hesthammer, J. and Fossen, H. 2000. Uncertainties associated with fault sealing analysis. Petroleum Geoscience, 6, 37–45, doi: 10.1144/petgeo.6.1.3710.1144/petgeo.6.1.37
    https://doi.org/10.1144/petgeo.6.1.37 [Google Scholar]
  21. Heum, O.R. 1996. A fluid dynamic classification of hydrocarbon entrapment. Petroleum Geoscience, 2, 145–158, doi: 10.1144/petgeo.2.2.14510.1144/petgeo.2.2.145
    https://doi.org/10.1144/petgeo.2.2.145 [Google Scholar]
  22. Hubbert, M.K. 1953. Entrapment of petroleum under hydrodynamic conditions. AAPG Bulletin, 37, 1954–2026, doi: 10.1306/5CEADD61-16BB-11D7-8645000102C1865D10.1306/5CEADD61‑16BB‑11D7‑8645000102C1865D
    https://doi.org/10.1306/5CEADD61-16BB-11D7-8645000102C1865D [Google Scholar]
  23. Hubbert, M.K. 1956. Darcy's law and the field equations of the flow of underground fluids. Transactions of the AIME, 207, 222–239, doi: 10.2118/749-G10.2118/749‑G
    https://doi.org/10.2118/749-G [Google Scholar]
  24. Iyer, K., Schmid, D.W., Rüpke, L.H., Skeie, J.E., Karlsen, F. and Hartz, E.H. 2018. Importance of evolving fault seals on petroleum systems: Southern Halten terrace, Norwegian Sea. AAPG Bulletin, 102, 671–689, doi: 10.1306/020817161641701710.1306/0208171616417017
    https://doi.org/10.1306/0208171616417017 [Google Scholar]
  25. Karlsen, D.A., Skeie, J.E. et al..2004. Petroleum migration, faults and overpressure. Part II. Case history: the Haltenbanken Petroleum Province, offshore Norway. Geological Society, London, Special Publications, 237, 305–372, doi: 10.1144/GSL.SP.2004.237.01.1810.1144/GSL.SP.2004.237.01.18
    https://doi.org/10.1144/GSL.SP.2004.237.01.18 [Google Scholar]
  26. Knipe, R., Fisher, Q. et al..2002. Fluid Flow Behaviour of Faults: Critical Variables, Uncertainty Limits and Prediction. AAPG Annual Meeting 2003, Barossa Valley, South Australia.
    [Google Scholar]
  27. Knott, S.D., Beach, A., Brockbank, P.J., Lawson Brown, J., McCallum, J.E. and Welbon, A.I. 1996. Spatial and mechanical controls on normal fault populations. Journal of Structural Geology, 18, 359–372, doi: 10.1016/s0191-8141(96)80056-310.1016/s0191‑8141(96)80056‑3
    https://doi.org/10.1016/s0191-8141(96)80056-3 [Google Scholar]
  28. Koch, J.-O. and Heum, O.R.1995. Exploration trends of the Halten Terrace. In: Hanslien, S. (ed.) Petroleum Exploration and Exploitation in Norway: Proceedings of the Norwegian Petroleum Society Conference, 9–11 December 1991, Stavanger, Norway. Elsevier, Amsterdam [u.a.], 235–251.
    [Google Scholar]
  29. Lindsay, N.G., Murphy, F.C., Walsh, J.J. and Watterson, J.1992. Outcrop Studies of Shale Smears on Fault Surface. In: Flint, S.S. and Bryant, I.D. (eds) The Geological Modelling of Hydrocarbon Reservoirs and Outcrop Analogues. John Wiley and Sons, Ltd, 113–123.
    [Google Scholar]
  30. Manzocchi, T. and Childs, C. 2013. Quantification of hydrodynamic effects on capillary seal capacity. Petroleum Geoscience, 19, 105–121, doi: 10.1144/petgeo2012-00510.1144/petgeo2012‑005
    https://doi.org/10.1144/petgeo2012-005 [Google Scholar]
  31. Manzocchi, T., Walsh, J.J., Nell, P. and Yielding, G. 1999. Fault transmissibility multipliers for flow simulation models. Petroleum Geoscience, 5, 53–63, doi: 10.1144/petgeo.5.1.5310.1144/petgeo.5.1.53
    https://doi.org/10.1144/petgeo.5.1.53 [Google Scholar]
  32. Müller, P.2023. Hydrodynamics and fault sealing at the Njord Field. PhD thesis, University of Bergen.
    [Google Scholar]
  33. Ravnås, R., Berge, K., Campbell, H., Harvey, C. and Norton, M.J.2014. Halten terrace Lower and Middle Jurassic inter-rift megasequence analysis: megasequence structure, sedimentary architecture and controlling parameters. In: Martinius, A.W., Ravnås, R., Howell, J.A., Steel, R.J. and Wonham, J.P. (eds) From Depositional Systems to Sedimentary Successions on the Norwegian Continental Margin. John Wiley & Sons, 215–251.
    [Google Scholar]
  34. Revil, A. and Cathles, L.M. 1999. Permeability of shaly sands. Water Resources Research, 35, 651–662, doi: 10.1029/98WR02700.10.1029/98WR02700.
    https://doi.org/10.1029/98WR02700. [Google Scholar]
  35. Skerlec, G.M. 1997. Risking fault seal in the Gulf Coast (abs.). Houston Geological Society Bulletin, 39, No. 5, 9-9.
    [Google Scholar]
  36. Skerlec, G.M.1999. Treatise of Petroleum Geology/Handbook of Petroleum Geology: Exploring for Oil and Gas Traps. Chapter 10: Evaluating Top and Fault Seal. AAPG Special Volumes.
    [Google Scholar]
  37. Speksnijder, A. 1987. The structural configuration of Cormorant Block IV in context of the northern Viking Graben structural framework. Geologie en Mijnbouw, 65, 357–380.
    [Google Scholar]
  38. Sperrevik, S., Gillespie, P.A., Fisher, Q.J., Halvorsen, T. and Knipe, R.J.2002. Empirical estimation of fault rock properties. In: Koestler, A.G. and Hunsdale, R. (eds) Norwegian Petroleum Society Special Publications. Elsevier, 11, 109–125.
    [Google Scholar]
  39. Teige, G.M.G., Thomas, W.L.H., Hermanrud, C., Øren, P.-E., Rennan, L., Wilson, O.B. and Nordgård Bolås, H.M. 2006. Relative permeability to wetting-phase water in oil reservoirs. Journal of Geophysical Research: Solid Earth, 111, doi: 10.1029/2005JB00380410.1029/2005JB003804
    https://doi.org/10.1029/2005JB003804 [Google Scholar]
  40. Torabi, A. and Fossen, H. 2009. Spatial variation of microstructure and petrophysical properties along deformation bands in reservoir sandstones. AAPG Bulletin, 93, 919–938, doi: 10.1306/0327090816110.1306/03270908161
    https://doi.org/10.1306/03270908161 [Google Scholar]
  41. Underschultz, J. 2007. Hydrodynamics and membrane seal capacity. Geofluids, 7, 148–158, doi: 10.1111/j.1468-8123.2007.00170.x10.1111/j.1468‑8123.2007.00170.x
    https://doi.org/10.1111/j.1468-8123.2007.00170.x [Google Scholar]
  42. Watts, N.L. 1987. Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns. Marine and Petroleum Geology, 4, 274–307, doi: 10.1016/0264-8172(87)90008-010.1016/0264‑8172(87)90008‑0
    https://doi.org/10.1016/0264-8172(87)90008-0 [Google Scholar]
  43. Weast, R.C. and Astle, M.J.1982. CRC handbook of chemistry.
  44. Yielding, G.2002. Shale Gouge Ratio – calibration by geohistory. In: Koestler, A.G. and Hunsdale, R. (eds) Norwegian Petroleum Society Special Publications Hydrocarbon Seal Quantification. Elsevier, 11, 1–15.
    [Google Scholar]
  45. Yielding, G., Freeman, B. and Needham, D.T. 1997. Quantitative Fault Seal Prediction. AAPG Bulletin, 81, 897–917, doi: 10.1306/522B498D-1727-11D7-8645000102C1865D10.1306/522B498D‑1727‑11D7‑8645000102C1865D
    https://doi.org/10.1306/522B498D-1727-11D7-8645000102C1865D [Google Scholar]
  46. Yielding, G., Bretan, P. and Freeman, B. 2010. Fault seal calibration: a brief review. Geological Society, London, Special Publications, 347, 243–255, doi: 10.1144/SP347.1410.1144/SP347.14
    https://doi.org/10.1144/SP347.14 [Google Scholar]
/content/journals/10.1144/petgeo2023-025
Loading
/content/journals/10.1144/petgeo2023-025
Loading

Data & Media loading...

  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error