Basin Research - Volume 29, Issue 4, 2017

Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia–Eurasia collision zone offer the unique possibility to study middle–late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long‐term evolution of the Iranian Plateau, including the regional spatio‐temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle–late Miocene crustal shortening and thickening processes led to the growth of a basement‐cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland‐basin (Great Pari Basin) to the east between 16.5 and 10.7 Ma. By 10.7 Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement‐cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle‐flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.

The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.

The geodynamic processes in the western Mediterranean are driven by both deep (mantle) processes such as slab‐rollback or delamination, oblique plate convergence and inherited structures. The present‐day deformation of the Alboran Sea and in particular the Nekor basin area is linked to these coeval effects. The seismically active Nekor basin is an extensional basin formed in a convergent setting at the eastern part of the Rif Chain whose boundaries extend both onshore and offshore Morocco. We propose a new structural model of the Nekor basin based on high‐resolution offshore data compiled from recent seismic reflection profiles, swath bathymetry acquisitions and industrial seismic reflection profiles. The new data set shows that the northern limit of the basin is oriented N49° with right‐stepping faults from the Bousekkour–Aghbal fault to the sinistral Bokkoya fault zone. This pattern indicates the presence of an inherited left‐lateral basement fault parallel to the major inherited Nekor fault. This fault has been interpreted as a Quaternary active left‐lateral transfer fault localized on weak structural discontinuities inherited from the orogenic period. Onshore and offshore active faults enclose a rhombohedral tectonic Nekor Basin. Normal faults oriented N155° offset the most recent Quaternary deposits in the Nekor basin, and indicate the transtensional behaviour of this basin. The geometry of these faults suggests a likely rollover structure and the presence at depth of a crustal detachment. Inactive Plio‐Quaternary normal faults to the east of the Ras Tarf promontory and geometries of depocentres seem to indicate the migration of deformation from east to west. The local orientations of horizontal stress directions deduced from normal fault orientations are compatible with the extrusion of the Rifian units and coherent with the westward rollback of the Tethyan slab and the localization of the present‐day slab detachment or delamination.

Salt canopies are present in many of the worldwide large salt basins and are key players in the basins' structural evolution as well as in the development of associated hydrocarbon systems. This study employs 2D finite‐element models which incorporate the dynamical interaction of viscous salt and frictional‐plastic sediments in a gravity‐spreading system. We investigate the general emplacement of salt canopies that form in the centre of a large, autochthonous salt basin. This is motivated by the potential application to a mid‐basin canopy in the NW Gulf of Mexico (GoM) that developed in the late Eocene. Three different salt expulsion and canopy formation concepts that have been proposed in the salt‐tectonic literature for the GoM are tested. Two of these mechanisms require pre‐existing diapirs as precursory structures. We include their evolution in the models to assure a continuous, smooth evolution of the salt‐sediment system. The most efficient canopy formation takes place under the squeezed diapir mechanism. Here, shortening of a region containing pre‐existing diapirs is absorbed by the salt (the weakest part of the system), which is then expelled onto the seafloor. The expulsion rollover mechanism, which evacuates salt from beneath evolving rollover structures and expels it both laterally and to the surface, was not successfully captured by the numerical models. No rollover structures developed and only minor amounts of allochthonous salt emerged to the seafloor. The breached anticline mechanism requires substantial shortening of salt‐cored, pre‐weakened folds such that the salt breaches the anticlines and is expelled to the seafloor. The amount of shortening may be too large to occur in the central part of a salt basin, but may explain canopy evolution closer to the distal end of the allochthonous salt. When applying the different concepts to the northwestern GoM, none of the models adequately describes the entire system, yet the squeezed diapir mechanism captures most structural features of the Eocene paleocanopy. It is nevertheless possible that different mechanisms have acted in combination or sequentially in the northwestern GoM.

The distribution and structure of the Mesozoic and Cenozoic cover within the central part of the North Iberian Margin (Bay of Biscay) is analysed based on a dense set of 2D seismic reflection lines and logs. The integration of well data allows the recognition of seven seismostratigraphic units and the construction of a surface that illustrates the 3D morphology of this area at the time of the Jurassic rifting. The study zone comprises what is known as Le Danois Bank, a basement high, and the Asturian Basin, one of the sedimentary basins originated during the Iberian rifting at the end of the Paleozoic. Its development continued with the oceanisation of the Bay of Biscay as a failed arm of the Atlantic rift; later, during the Cenozoic, a drastic change in tectonic regime induced the partial closure of Biscay and building up the Cantabrian−Pyrenean chain along the northern border of Iberia. This compressional period left its imprint in the Asturian Basin sediments in the form of a mild inversion and general uplift. The geometry of the basin bottom appears as an asymmetric bowl thinning out towards the edges, with a main E‐W depocenter, separated by E‐W striking faults from a secondary one. Those bounding faults show twisted trends in the north, interpreted as a consequence of the compressional period, when a transfer zone in a N‐S direction formed between the two E‐W striking deformation fronts in Biscay. This study shows that the transfer zone extends further to the west, reaching the longitude of Le Danois Bank. The maximum thickness of the filling within the Asturian Basin is estimated in more than 10 km, deeper than assessed in previous studies. The recognition of frequent halokynetic structures at this longitude is another observation worth to remark. Based on this study, it is suggested that the basin formed on top of a distal basement block of stretched crust limiting with the hyperextended rifted domain of Biscay. This location largely conditioned its deformation during the late compression.

Careful assessment of basin thermal history is critical to modelling petroleum generation in sedimentary basins. In this paper, we propose a novel approach to constraining basin thermal history using palaeoclimate temperature reconstructions and study its impact on estimating source rock maturation and hydrocarbon generation in a terrestrial sedimentary basin. We compile mean annual temperature (MAT) estimates from macroflora assemblage data to capture past surface temperature variation for the Piceance Basin, a high‐elevation, intermontane, sedimentary basin in Colorado, USA. We use macroflora assemblage data to constrain the temporal evolution of the upper thermal boundary condition and to capture the temperature change with basin uplift. We compare these results with the case where the upper thermal boundary condition is based solely upon a simplified latitudinal temperature estimate with no elevation effect. For illustrative purposes, 2 one‐dimensional (1‐D) basin models are constructed using these two different upper thermal boundary condition scenarios and additional geological and geochemical input data in order to investigate the impact of the upper thermal boundary condition on petroleum source rock maturation and kerogen transformation processes. The basin model predictions indicate that the source rock maturation is very sensitive to the upper thermal boundary condition for terrestrial basins with variable elevation histories. The models show substantial differences in source rock maturation histories and kerogen transformation ratio over geologic time. Vitrinite reflectance decreases by 0.21%Ro, source rock transformation ratio decreases 10.5% and hydrocarbon mass generation decreases by 16% using the macroflora assemblage data. In addition, we find that by using the macroflora assemblage data, the modelled depth profiles of vitrinite reflectance better matches present‐day measurements. These differences demonstrate the importance of constraining thermal boundary conditions, which can be addressed by palaeotemperature reconstructions from palaeoclimate and palaeo‐elevation data for many terrestrial basins. Although the palaeotemperature reconstruction compiled for this study is region specific, the approach presented here is generally applicable for other terrestrial basin settings, particularly basins which have undergone substantial subaerial elevation change over time.