- Home
- A-Z Publications
- Geophysical Prospecting
- Previous Issues
- Volume 52, Issue 1, 2004
Geophysical Prospecting - Volume 52, Issue 1, 2004
Volume 52, Issue 1, 2004
-
-
Characterization of dipping fractures in a transverselyisotropic background
Authors V. Grechka and I. TsvankinABSTRACTAlthough it is believed that natural fracture sets predominantly have near‐vertical orientation, oblique stresses and some other mechanisms may tilt fractures away from the vertical. Here, we examine an effective medium produced by a single system of obliquely dipping rotationally invariant fractures embedded in a transversely isotropic with a vertical symmetry axis (VTI) background rock. This model is monoclinic with a vertical symmetry plane that coincides with the dip plane of the fractures.
Multicomponent seismic data acquired over such a medium possess several distinct features that make it possible to estimate the fracture orientation. For example, the vertically propagating fast shear wave (and the fast converted PS‐wave) is typically polarized in the direction of the fracture strike. The normal‐moveout (NMO) ellipses of horizontal reflection events are co‐orientated with the dip and strike directions of the fractures, which provides an independent estimate of the fracture azimuth. However, the polarization vector of the slow shear wave at vertical incidence does not lie in the horizontal plane – an unusual phenomenon that can be used to evaluate fracture dip. Also, for oblique fractures the shear‐wave splitting coefficient at vertical incidence becomes dependent on fracture infill (saturation).
A complete medium‐characterization procedure includes estimating the fracture compliances and orientation (dip and azimuth), as well as the Thomsen parameters of the VTI background. We demonstrate that both the fracture and background parameters can be obtained from multicomponent wide‐azimuth data using the vertical velocities and NMO ellipses of PP‐waves and two split SS‐waves (or the traveltimes of PS‐waves) reflected from horizontal interfaces. Numerical tests corroborate the accuracy and stability of the inversion algorithm based on the exact expressions for the vertical and NMO velocities.
-
-
-
Modelling of GPR waves for lossy media obeying a complex power law of frequency for dielectric permittivity
By Maksim BanoABSTRACTThe attenuation of ground‐penetrating radar (GPR) energy in the subsurface decreases and shifts the amplitude spectrum of the radar pulse to lower frequencies (absorption) with increasing traveltime and causes also a distortion of wavelet phase (dispersion). The attenuation is often expressed by the quality factor Q. For GPR studies, Q can be estimated from the ratio of the real part to the imaginary part of the dielectric permittivity.
We consider a complex power function of frequency for the dielectric permittivity, and show that this dielectric response corresponds to a frequency‐independent‐Q or simply a constant‐Q model. The phase velocity (dispersion relationship) and the absorption coefficient of electromagnetic waves also obey a frequency power law. This approach is easy to use in the frequency domain and the wave propagation can be described by two parameters only, for example Q and the phase velocity at an arbitrary reference frequency. This simplicity makes it practical for any inversion technique. Furthermore, by using the Hilbert transform relating the velocity and the absorption coefficient (which obeys a frequency power law), we find the same dispersion relationship for the phase velocity. Both approaches are valid for a constant value of Q over a restricted frequency‐bandwidth, and are applicable in a material that is assumed to have no instantaneous dielectric response.
Many GPR profiles acquired in a dry aeolian environment have shown a strong reflectivity inside dunes. Changes in water content are believed to be the origin of this reflectivity. We model the radar reflections from the bottom of a dry aeolian dune using the 1D wavelet modelling method. We discuss the choice of the reference wavelet in this modelling approach. A trial‐and‐error match of modelled and observed data was performed to estimate the optimum set of parameters characterizing the materials composing the site. Additionally, by combining the complex refractive index method (CRIM) and/or Topp equations for the bulk permittivity (dielectric constant) of moist sandy soils with a frequency power law for the dielectric response, we introduce them into the expression for the reflection coefficient. Using this method, we can estimate the water content and explain its effect on the reflection coefficient and on wavelet modelling.
-
-
-
Adaptive subtraction of multiples using the L1‐norm
Authors A. Guitton and D. J. VerschuurABSTRACTA strategy for multiple removal consists of estimating a model of the multiples and then adaptively subtracting this model from the data by estimating shaping filters. A possible and efficient way of computing these filters is by minimizing the difference or misfit between the input data and the filtered multiples in a least‐squares sense. Therefore, the signal is assumed to have minimum energy and to be orthogonal to the noise. Some problems arise when these conditions are not met. For instance, for strong primaries with weak multiples, we might fit the multiple model to the signal (primaries) and not to the noise (multiples). Consequently, when the signal does not exhibit minimum energy, we propose using the L1‐norm, as opposed to the L2‐norm, for the filter estimation step. This choice comes from the well‐known fact that the L1‐norm is robust to ‘large’ amplitude differences when measuring data misfit. The L1‐norm is approximated by a hybrid L1/L2‐norm minimized with an iteratively reweighted least‐squares (IRLS) method. The hybrid norm is obtained by applying a simple weight to the data residual. This technique is an excellent approximation to the L1‐norm. We illustrate our method with synthetic and field data where internal multiples are attenuated. We show that the L1‐norm leads to much improved attenuation of the multiples when the minimum energy assumption is violated. In particular, the multiple model is fitted to the multiples in the data only, while preserving the primaries.
-
-
-
Azimuth moveout correction for transversely isotropic media
More LessABSTRACTThe azimuth moveout (AMO) operator in homogeneous transversely isotropic media with a vertical symmetry axis (VTI), as in isotropic media, has an overall skewed saddle shape. However, the AMO operator in anisotropic media is complicated; it includes, among other things, triplications at low angles. Even in weaker anisotropies, with the anisotropy parameter η= 0.1 (10% anisotropy), the AMO operator is considerably different from the isotropic operator, although free of triplications. The structure of the operator in VTI media (positive η) is stretched (has a wider aperture) compared with operators in isotropic media, with the amount of stretch being dependent on the strength of anisotropy. If the medium is both vertically inhomogeneous, i.e. the vertical velocity is a function of depth (v(z)), and anisotropic, which is a common combination in practical problems, the shape of the operator again differs from that for isotropic media. However, the difference in the AMO operator between the homogeneous and the v(z) cases, even for anisotropic media, is small. Stated simply, anisotropy influences the shape and aperture of the AMO operator far more than vertical inhomogeneity does.
-
-
-
Forward computation of the magnetic field of a 3D body with arbitrary boundary and continually varying magnetization
Authors Yulin An, Jinming Huang and Yudong ChenABSTRACTThe forward computation of the gravitational and magnetic fields due to a 3D body with an arbitrary boundary and continually varying density or magnetization is an important problem in gravitational and magnetic prospecting. In order to solve the inverse problem for the arbitrary components of the gravitational and magnetic anomalies due to an arbitrary 3D body under complex conditions, including an uneven observation surface, the existence of background anomalies and very little or no a priori information, we used a spherical coordinate system to systematically investigate forward methods for such anomalies and developed a series of universal spherical harmonic expansions of gravitational and magnetic fields. For the case of a 3D body with an arbitrary boundary and continually varying magnetization, we have also given the surface integral expressions for the common spherical harmonic coefficients in the expansion of the magnetic field due to the body, and a very precise numerical integral algorithm to calculate them. Thus a simple and effective method of solving the forward problem for magnetic fields due to 3D bodies of this kind has been found, and in this way a foundation is laid for solving the inverse problem of these magnetic fields. In addition, by replacing the parameters and unit vectors in the spherical harmonic expansion of a magnetic field by gravitational parameters and a downward unit vector, we have also derived a forward method for the gravitational field (similar to that for the magnetic case) of a 3D body with an arbitrary boundary and continually varying density.
-
-
-
2.5D modelling, inversion and angle migration in anisotropic elastic media
Authors Stig‐Kyrre Foss and Bjørn UrsinABSTRACT2.5D modelling approximates 3D wave propagation in the dip‐direction of a 2D geological model. Attention is restricted to raypaths for waves propagating in a plane. In this way, fast inversion or migration can be performed. For velocity analysis, this reduction of the problem is particularly useful.
We review 2.5D modelling for Born volume scattering and Born–Helmholtz surface scattering. The amplitudes are corrected for 3D wave propagation, taking into account both in‐plane and out‐of‐plane geometrical spreading. We also derive some new inversion/migration results. An AVA‐compensated migration routine is presented that is simplified compared with earlier results. This formula can be used to create common‐image gathers for use in velocity analysis by studying the residual moveout. We also give a migration formula for the energy‐flux‐normalized plane‐wave reflection coefficient that models large contrast in the medium parameters not treated by the Born and the Born–Helmholtz equation results. All results are derived using the generalized Radon transform (GRT) directly in the natural coordinate system characterized by scattering angle and migration dip. Consequently, no Jacobians are needed in their calculation.
Inversion and migration in an orthorhombic medium or a transversely isotropic (TI) medium with tilted symmetry axis are the lowest symmetries for practical purposes (symmetry axis is in the plane). We give an analysis, using derived methods, of the parameters for these two types of media used in velocity analysis, inversion and migration. The kinematics of the two media involve the same parameters, hence there is no distinction when carrying out velocity analysis. The in‐plane scattering coefficient, used in the inversion and migration, also depends on the same parameters for both media. The out‐of‐plane geometrical spreading, necessary for amplitude‐preserving computations, for the TI medium is dependent on the same parameters that govern in‐plane kinematics. For orthorhombic media, information on additional parameters is required that is not needed for in‐plane kinematics and the scattering coefficients.
Resolution analysis of the scattering coefficient suggests that direct inversion by GRT yields unreliable parameter estimates. A more practical approach to inversion is amplitude‐preserving migration followed by AVA analysis.
SYMBOLS AND NOTATION
A list of symbols and notation is given in Appendix D.
-
Volumes & issues
-
Volume 72 (2023 - 2024)
-
Volume 71 (2022 - 2023)
-
Volume 70 (2021 - 2022)
-
Volume 69 (2021)
-
Volume 68 (2020)
-
Volume 67 (2019)
-
Volume 66 (2018)
-
Volume 65 (2017)
-
Volume 64 (2015 - 2016)
-
Volume 63 (2015)
-
Volume 62 (2014)
-
Volume 61 (2013)
-
Volume 60 (2012)
-
Volume 59 (2011)
-
Volume 58 (2010)
-
Volume 57 (2009)
-
Volume 56 (2008)
-
Volume 55 (2007)
-
Volume 54 (2006)
-
Volume 53 (2005)
-
Volume 52 (2004)
-
Volume 51 (2003)
-
Volume 50 (2002)
-
Volume 49 (2001)
-
Volume 48 (2000)
-
Volume 47 (1999)
-
Volume 46 (1998)
-
Volume 45 (1997)
-
Volume 44 (1996)
-
Volume 43 (1995)
-
Volume 42 (1994)
-
Volume 41 (1993)
-
Volume 40 (1992)
-
Volume 39 (1991)
-
Volume 38 (1990)
-
Volume 37 (1989)
-
Volume 36 (1988)
-
Volume 35 (1987)
-
Volume 34 (1986)
-
Volume 33 (1985)
-
Volume 32 (1984)
-
Volume 31 (1983)
-
Volume 30 (1982)
-
Volume 29 (1981)
-
Volume 28 (1980)
-
Volume 27 (1979)
-
Volume 26 (1978)
-
Volume 25 (1977)
-
Volume 24 (1976)
-
Volume 23 (1975)
-
Volume 22 (1974)
-
Volume 21 (1973)
-
Volume 20 (1972)
-
Volume 19 (1971)
-
Volume 18 (1970)
-
Volume 17 (1969)
-
Volume 16 (1968)
-
Volume 15 (1967)
-
Volume 14 (1966)
-
Volume 13 (1965)
-
Volume 12 (1964)
-
Volume 11 (1963)
-
Volume 10 (1962)
-
Volume 9 (1961)
-
Volume 8 (1960)
-
Volume 7 (1959)
-
Volume 6 (1958)
-
Volume 5 (1957)
-
Volume 4 (1956)
-
Volume 3 (1955)
-
Volume 2 (1954)
-
Volume 1 (1953)