- Home
- A-Z Publications
- Geophysical Prospecting
- Previous Issues
- Volume 54, Issue 1, 2006
Geophysical Prospecting - Volume 54, Issue 1, 2006
Volume 54, Issue 1, 2006
-
-
Accounting for velocity anisotropy in seismic traveltime tomography: a case study from the investigation of the foundations of a Byzantine monumental building
Authors L. Polymenakos, D. Tweeton and S. PapamarinopoulosABSTRACTWe estimate velocity anisotropy factors from seismic traveltime tomographic data and apply a correction for anisotropy in the inversion procedure to test possible improvements on the traveltime fit and the quality of the resulting tomographic images. We applied the anisotropy correction on a traveltime data set obtained from the investigation of the foundation structure of a monumental building: a Byzantine church from the 11th century AD, in Athens, Greece.
Vertical transverse isotropy is represented by one axis of symmetry and one anisotropy magnitude for the entire tomographic inversion grid. We choose the vertical direction for the symmetry axis by analysing the available data set and taking into account information on the character of the foundations of the church from the literature and past excavations. The anisotropy magnitude is determined by testing a series of values of anisotropy and examining their effect on the tomographic inversion results. The best traveltime fit and image quality are obtained with an anisotropy value (Vmax/Vmin) of 1.6, restricted to the high velocity structures in the subsurface. We believe that this anisotropy value, which is significantly higher than the usual values reported for near‐surface geological material, is related to the fabric of the church foundations, due to the shape of the individual stone blocks and the layout of the stonework.
Inversion results obtained with the correction for anisotropy indicate that both the traveltime fit and the image quality are improved, providing an enhanced reconstruction of the velocity field, especially for the high‐velocity features. Based on this enhanced and more reliable reconstruction of velocity distribution, an improved image of the subsurface material character was made possible. In particular, the pattern and state of the church foundations and possible weak ground material areas were revealed more clearly. This improved subsurface knowledge may assist in a better design of restoration measures for monumental buildings such as Byzantine churches.
-
-
-
The effects of near‐surface conditions on anisotropy parameter estimations from 4C seismic data
Authors Bärbel Traub and Xiang‐Yang LiABSTRACTWe present a study of anisotropic parameter estimation in the near‐surface layers for P‐wave and converted‐wave (C‐wave) data. Near‐surface data is affected by apparent anisotropy due to a vertical velocity compaction gradient. We have carried out a modelling study, which showed that a velocity gradient introduces apparent anisotropy into an isotropic medium. Thus, parameter estimation will give anomalous values that affect the imaging of the target area.
The parameter estimation technique is also influenced by phase reversals with diminishing amplitude, leading to erroneous parameters. In a modelling study using a near‐surface model, we have observed phase reversals in near‐surface PP reflections. The values of the P‐wave anisotropy parameter η estimated from these events are about an order of magnitude larger than the model values. Next, we use C‐wave data to estimate the effect of anisotropy (χ) and compute η from these values. These calculated η‐values are closer to the model values, and NMO correction with both η‐values shows a better correction for the calculated value. Hence, we believe that calculating η from χ gives a better representation of the anisotropy than picked η from the P‐wave.
Finally, we extract the anisotropy parameters η and χ from real data from the Alba Field in the North Sea. Comparing the results with reference values from a model built according to well‐log, VSP and surface data, we find that the parameters show differences of up to an order of magnitude. The η‐values calculated from the C‐wave anisotropy parameter χ fit the reference values much better and show values of the same order of magnitude.
-
-
-
Seismic monitoring of pressure depletion evaluated for a United Kingdom continental‐shelf gas reservoir
Authors Colin MacBeth, Jan Stammeijer and Mark OmerodABSTRACTThe possibility of using 4D seismic data for monitoring pressure depletion in the low‐porosity, tight gas‐bearing Rotliegende sandstones of the UK Southern Gas Basin is investigated. The focus here is on whether fractures in the upper part of the reservoir, known to enhance productivity, can also enhance the time‐lapse seismic response. The study uses laboratory data to evaluate core‐plug stress sensitivity, published data for the stress behaviour of the fractures, followed by petro‐elastic and 4D seismic modelling of both the fractured and unfractured formation. The magnitude of the resultant 4D signatures suggests that production‐induced changes in the unfractured sands are unlikely to be observed except perhaps with highly repeatable time‐lapse surveys. On the other hand, the presence of fractures could render production effects visible in dedicated 4D acquisition or prestack parallel processed data. If present however, the signature will be sporadic, as fractures in the area are known to exist in clusters. The 4D signature may be enhanced further by certain classes of vertical geological variability and also areas of high reservoir pressure. The strongest evidence of depletion is expected to be time‐shifts seen at the base of the Rotliegende reservoir.
-
-
-
High‐resolution depth imaging with sparseness‐constrained inversion
Authors Jianfeng Zhang and Kees WapenaarABSTRACTAn imaging technique is developed which exceeds the resolution limitation prescribed by conventional seismic imaging methods. The high‐resolution imaging is obtained by introducing a sparseness‐constrained least‐squares inversion into the imaging process of prestack depth migration. This is implemented by a proposed interference technique. In contrast to conventional depth migration, a decomposed signal or combined event, instead of the source wavelet, is needed in the proposed scheme. The proposed method aims to image a small local region with a higher resolution using the prestack data set. It should be applied following conventional depth imaging if a higher resolution is needed in a target zone rather than replacing the conventional depth imaging for the entire medium. Synthetic examples demonstrate the significant improvements in the resolution using the proposed scheme.
-
-
-
Time‐lapse seismic analysis of pressure depletion in the Southern Gas Basin
Authors Stephen A. Hall, Colin MacBeth, Jan Stammeijer and Mark OmerodABSTRACTIn the Southern Gas Basin (SGB) of the North Sea there are many mature gas fields where time‐lapse monitoring could be very beneficial in extending production life. However, the conditions are not immediately attractive for time‐lapse seismic assessment. This is primarily because the main production effect to be assessed is a pore pressure reduction and frame stiffening because of gas production in tight sandstone reservoirs that also have no real seismic direct hydrocarbon indicators. Modelling, based on laboratory measurements, has shown that such an effect would be small and difficult to detect in seismic data. This paper makes two main contributions. Firstly, this is, to our knowledge, the first time‐lapse study in the SGB and involves a real‐data assessment of the viability for detecting production in such an environment. Secondly, the feasibility of using markedly different legacies of data in such a study is addressed, including an assessment of the factors influencing the crossmatching. From the latter, it is found that significant, spatially varying time shifts need to be, and are successfully, resolved through 3‐D warping. After the warping, the primary factors limiting the crossmatching appear to be residual local phase variations, possibly induced by the differing migration strategies, structure, reverberations and different coherencies of the volumes, caused by differences in acquisition‐structure azimuth and acquisition fold. Despite these differences, a time‐lapse amplitude signature is observed that is attributable to production. The character of the 4‐D amplitude anomalies may also indicate variations in stress sensitivity, e.g. because of zones of fracturing. Additionally, warping‐derived time attributes have been highlighted as a potential additional avenue for detection of pressure depletion in such reservoirs. Although the effects are subtle, they may indicate changes in stress/pressure in and around the reservoir because of production. However, to fully resolve the subtle time‐lapse effects in such a reservoir, the data differences need to be better addressed, which may be possible by full re‐processing and pre‐stack analysis, but more likely dedicated 4‐D acquisition would be required.
-
-
-
Gas saturation prediction and effect of low frequencies on acoustic impedance images at Foinaven Field
Authors Sean R. Wagner, Wayne D. Pennington and Colin MacBethABSTRACTLow frequencies are necessary in seismic data for proper acoustic impedance imaging and for petrophysical interpretation. Without lower frequencies, images can be distorted leading to incorrect reservoir interpretation and petrophysical predictions. As part of the Foinaven Active Reservoir Management (FARM) project, a Towed Streamer survey and an Ocean Bottom Hydrophone (OBH) survey were shot in both 1995 and 1998. The OBH surveys contain lower frequencies than the streamer surveys, providing a unique opportunity to study the effects that low frequencies have on both the acoustic impedance image along with petrophysical time‐lapse predictions. Artefacts that could easily have been interpreted as high‐resolution features in the streamer data impedance volumes can be distinguished by comparison with the impedance volumes created from the OBH surveys containing lower frequencies.
In order to obtain results from the impedance volumes, impedance must be related to saturation. The mixing of exsolved gas, oil and water phases involves using the Reuss (uniform) or Voigt (patchy approximation) mixing laws. The Voigt average is easily misused by assuming that the end‐points correspond to 0% and 100% gas saturation. This implies that the patches are either 0% gas saturation or 100% gas saturation, which is never the case. Here, the distribution of gas as it comes out of solution is assumed to be uniform until the gas saturation reaches a sufficiently high value (critical gas saturation) to allow gas to flow. Therefore, at low gas saturations the distribution is uniform, but at saturations above critical, it is patchy, with patches that range from critical gas saturation to the highest gas saturation possible (1 minus residual oil and irreducible water saturation).
-
-
-
Magnetic data analysis at low latitudes using magnitude transforms
Authors Daniela Gerovska and Petar StavrevABSTRACTMagnitude transforms include magnitude magnetic anomalies (MMA), their gradients and Laplacians. They can be calculated from the total magnetic anomalies or other component anomalies. Magnitude magnetic anomalies have a space distribution different from that of the component anomalies. Their values are non‐negative and their respective patterns are similar to the positive gravity anomalies. Magnitude transforms are an effective tool for magnetic data analysis due to their simplified pattern and direct correlation with the space location of the source. They have advantages over the traditionally used reduction‐to‐the‐pole (RTP) transform, especially at low magnetic latitudes. The calculation of magnitudes of the anomalous field requires the total field data to be transformed into the component anomalies, while the reduction‐to‐the‐pole transform also includes a rotation of the magnetization vector, the orientation of which is usually assumed. For equal latitudes, the transfer functions of component‐component transforms in the frequency domain show better stability than the component‐component‐rotation transfer function. This is illustrated by a comparison of analytical expressions, and synthetic models of magnetic fields. The Dixon seamount case shows the possibilities for an improved data analysis and more confident source recognition at low latitudes using magnetic transforms.
-
Volumes & issues
-
Volume 72 (2023 - 2024)
-
Volume 71 (2022 - 2023)
-
Volume 70 (2021 - 2022)
-
Volume 69 (2021)
-
Volume 68 (2020)
-
Volume 67 (2019)
-
Volume 66 (2018)
-
Volume 65 (2017)
-
Volume 64 (2015 - 2016)
-
Volume 63 (2015)
-
Volume 62 (2014)
-
Volume 61 (2013)
-
Volume 60 (2012)
-
Volume 59 (2011)
-
Volume 58 (2010)
-
Volume 57 (2009)
-
Volume 56 (2008)
-
Volume 55 (2007)
-
Volume 54 (2006)
-
Volume 53 (2005)
-
Volume 52 (2004)
-
Volume 51 (2003)
-
Volume 50 (2002)
-
Volume 49 (2001)
-
Volume 48 (2000)
-
Volume 47 (1999)
-
Volume 46 (1998)
-
Volume 45 (1997)
-
Volume 44 (1996)
-
Volume 43 (1995)
-
Volume 42 (1994)
-
Volume 41 (1993)
-
Volume 40 (1992)
-
Volume 39 (1991)
-
Volume 38 (1990)
-
Volume 37 (1989)
-
Volume 36 (1988)
-
Volume 35 (1987)
-
Volume 34 (1986)
-
Volume 33 (1985)
-
Volume 32 (1984)
-
Volume 31 (1983)
-
Volume 30 (1982)
-
Volume 29 (1981)
-
Volume 28 (1980)
-
Volume 27 (1979)
-
Volume 26 (1978)
-
Volume 25 (1977)
-
Volume 24 (1976)
-
Volume 23 (1975)
-
Volume 22 (1974)
-
Volume 21 (1973)
-
Volume 20 (1972)
-
Volume 19 (1971)
-
Volume 18 (1970)
-
Volume 17 (1969)
-
Volume 16 (1968)
-
Volume 15 (1967)
-
Volume 14 (1966)
-
Volume 13 (1965)
-
Volume 12 (1964)
-
Volume 11 (1963)
-
Volume 10 (1962)
-
Volume 9 (1961)
-
Volume 8 (1960)
-
Volume 7 (1959)
-
Volume 6 (1958)
-
Volume 5 (1957)
-
Volume 4 (1956)
-
Volume 3 (1955)
-
Volume 2 (1954)
-
Volume 1 (1953)