CFD Modeling of Erosion in Gas-Solid and Liquid-Solid Flows

References

1. A.Mansouri, H.Arabnejad, S.Karimi, S. A.Shirazi, and B. S.McLaury
   , “Improved CFD modeling and validation of erosion damage due to fine sand particles”, Wear, vol. 338, pp. 339–350, 2015.
   [Google Scholar]
2. D. O.Njobuenwu and M.Fairweather
   , “Modelling of pipe bend erosion by dilute particle suspensions”, Computers & Chemical Engineering, vol. 42, pp. 235–247, 2012.
   [Google Scholar]
3. C.Argyropoulos and N.Markatos
   , “Recent advances on the numerical modelling of turbulent flows”, Applied Mathematical Modelling, vol. 39, no. 2, pp. 693–732, 2015.
   [Google Scholar]
4. B.Lee, J.Tu, and C.Fletcher
   , “On numerical modeling of particle-wall impaction in relation to erosion prediction: Eulerian versus Lagrangian method”, Wear, vol. 252, no. 3, pp. 179–188, 2002.
   [Google Scholar]
5. A.Gnanavelu, N.Kapur, A.Neville, J.Flores, and N.Ghorbani
   , “A numerical investigation of a geometry independent integrated method to predict erosion rates in slurry erosion”, Wear, vol. 271, no. 5, pp. 712–719, 2011.
   [Google Scholar]
6. A.Mansouri, H.Arabnejad, S.Shirazi, and B.McLaury
   , “A combined CFD/experimental methodology for erosion prediction”, Wear, vol. 332, pp. 1090–1097, 2015.
   [Google Scholar]
7. Y.Zhang, E.Reuterfors, B. S.McLaury, S.Shirazi, and E.Rybicki
   , “Comparison of computed and measured particle velocities and erosion in water and air flows”, Wear, vol. 263, no. 1, pp. 330–338, 2007.
   [Google Scholar]
8. W.Peng and X.Cao
   , “Numerical simulation of solid particle erosion in pipe bends for liquid-solid flow”, Powder Technology, vol. 294, pp. 266–279, 2016.
   [Google Scholar]
9. G.Grant and W.Tabakoff
   , “An experimental investigation of the erosive characteristics of 2024 aluminum alloy”, CINCINNATI UNIV OH DEPT OF AEROSPACE ENGINEERING1973.
10. A.Forder, M.Thew, and D.Harrison
    , “A numerical investigation of solid particle erosion experienced within oilfield control valves”, Wear, vol. 216, no. 2, pp. 184–193, 1998.
    [Google Scholar]
11. I.Finnie
    , “Erosion of surfaces by solid particles”, wear, vol. 3, no. 2, pp. 87–103, 1960.
    [Google Scholar]
12. B. S.McLaury
    , “Predicting solid particle erosion resulting from turbulent fluctuations in oilfield geometries”, 1997.
    [Google Scholar]
13. Y. I.Oka, K.Okamura, and T.Yoshida
    , “Practical estimation of erosion damage caused by solid particle impact: Part 1: Effects of impact parameters on a predictive equation”, Wear, vol. 259, no. 1, pp. 95–101, 2005.
    [Google Scholar]
14. Y.Kliafas, and M.Holt
    , “LDV measurements of a turbulent air-solid two-phase flow in a 90 bend”, Experiments in Fluids, vol. 5, no. 2, pp. 73–85, 1987.
    [Google Scholar]
15. K.Sun, L.Lu, and H.Jiang
    , “A computational investigation of particle distribution and deposition in a 90° bend incorporating a particle-wall model”, Building and Environment, vol. 46, no. 6, pp. 1251–1262, 2011.
    [Google Scholar]
16. L.Zeng, G.Zhang, and X.Guo
    , “Erosion-corrosion at different locations of X65 carbon steel elbow”, Corrosion Science, vol. 85, pp. 318–330, 2014.
    [Google Scholar]