1887

Abstract

Over-pressure is one of the important drilling hazards seen globally. Estimates of over-pressured zones/locations and over-pressure magnitudes have a direct impact on well drilling and completion. Overburden gradient (OBG), Pore pressure (PP) and Fracture Gradient (FG) are the three basic outputs of any pore pressure analysis. OBG is calculated from density (RHOB) log data. As density log data does not start from surface/seabed, we use several equations to compute shallow section pseudo-RHOB and integrate it with LWD/wireline RHOB log data. This article discusses the issues with various ways to fill the data gap of shallow section density. PP is normally predicted against shale zones and then calibrated with the most reliable and direct pressure measurements against sands and log data from adjoining shales. This paper also addresses the various issues faced while picking shale points to predict pore pressure.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201700042
2017-03-19
2024-10-05
Loading full text...

Full text loading...

/content/papers/10.3997/2214-4609.201700042
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error