1887

Abstract

Summary

Scaling spontaneous imbibition (SI) data is essential in understating the behavior of naturally fractured water-driven reservoirs. The efforts of developing scaling groups has been the focus of many studies since 1950’s. In this paper we highlight the outcome of a detailed investigation on the influence of different rock and fluid properties on the quality of the scaling group proposed by Schmid and Geiger. These rock and fluid parameters can have either a direct effect on the scaling law, or an indirect effect through the semi-analytical solution of SI. This analysis will allow us to identify how imbibition assisted recovery curves change with varying physical conditions, and whether the scaling group will hold regardless of the varying range of parameters. Based on our analysis, we notice that the variations in different parameters including initial water and wettability of the studied core did not affect the quality of the scaling group, and the results matched the semi-analytical solution. The results of the work done in this study can be used to produce more experiments with varying operating conditions and compare the outcome against similar numerical models.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201903130
2019-11-18
2024-04-19
Loading full text...

Full text loading...

References

  1. Abd, A. S. and Alyafei, N.
    (2018). Numerical investigation on the effect of boundary conditions on the scaling of spontaneous imbibition. Oil & Gas Science and Technology- Rev. IFP Energies Nouvelles
    [Google Scholar]
  2. Abd, A., Elhafyan, E., Siddiqui, A., Alnoush, W., Blunt, M., & Alyafei, N.
    (2019). A review of the phenomenon of counter-current spontaneous imbibition: Analysis and data interpretation. Journal Of Petroleum Science And Engineering, 180, 456–470.
    [Google Scholar]
  3. Aronofsky, J. S., Masse, L., and Natanson, S. G.
    (1958). A Model for the Mechanism of Oil Recovery from the Porous Matrix Due to Water Invasion in Fractured Reservoirs. page 3. Society of Petroleum Engineers.
    [Google Scholar]
  4. Khan, A. S., Siddiqui, A. R., Abd, A. S., and Alyafei, N.
    (2018). Guidelines for numerically modeling co- and countercurrent spontaneous imbibition. Transport in Porous Media, 124(3):743–766.
    [Google Scholar]
  5. Mason, G., Fischer, H., Morrow, N., Ruth, D., and Wo, S.
    (2009). Effect of sample shape on counter-current spontaneous imbibition production vs time curves. Journal of Petroleum Science and Engineering, 66(3):83–97.
    [Google Scholar]
  6. Morrow, N. R. and Mason, G.
    (2001). Recovery of oil by spontaneous imbibition. Current Opinion in Colloid and Interface Science, 6(4):321–337.
    [Google Scholar]
  7. Nooruddin, H. A. and Blunt, M. J.
    (2016). Analytical and numerical investigations of spontaneous imbibition in porous media. Water Resources Research, 52(9):7284–7310.
    [Google Scholar]
  8. Saidi, A.
    (1983). Simulation of Naturally Fractured Reservoirs. In SPE Reservoir Simulation Symposium. Society of Petroleum Engineers.
    [Google Scholar]
  9. Schmid, K. S. and Geiger, S.
    (2012). Universal scaling of spontaneous imbibition for water-wet systems. Water Resources Research, 48(3).
    [Google Scholar]
  10. Schmid, K. S., Alyafei, N., Geiger, S., and Blunt, M. J.
    (2016). Analytical Solutions for Spontaneous Imbibition: Fractional-Flow Theory and Experimental Analysis. SPE Journal, 21(06):2308–2316.
    [Google Scholar]
  11. Zhou, X., Morrow, N. R., and Ma, S.
    (2000). Interrelationship of Wettability, Initial Water Saturation, Aging Time, and Oil Recovery by Spontaneous Imbibition and Waterflooding. SPE Journal, 5(02):199–207.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201903130
Loading
/content/papers/10.3997/2214-4609.201903130
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error