1887

Abstract

Summary

This paper presents several analytical models for the pressure distribution in hydraulically fractured reservoirs depleted by horizontal wells with the aid of the cyclic CO2 injection. The objective is eliminating the uncertainties in predicting reservoir performance after the enhancement by CO2 injection and developing accurate tools for designing the CO2 injection projects.

Although CO2-injection has been a favorable enhanced oil recovery (EOR) approach in the petroleum industry, some studies reported its negative impact due to the premature decline in production. Additionally, few researchers have linked the cyclic injection with the flow response inside the formation. Therefore, it is essential to learn how the CO2 injection process can be optimized in the hydraulically fractured reservoirs to increase production. The analytical solutions presented here reveal three flow regimes (hydraulic fracture regime, bilinear flow regime, and formation linear flow regime) that develop during production and injection in unconventional shale reservoirs. Then the numerical solution is designed to validate those analytical models.

The results show that the hydraulic fracture flow regime and bilinear flow regime occur at the early and intermediate well production stage. These indicate the end of circulation of the CO2 injection into the fractures and the stimulated reservoir volume, respectively.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.202011427
2021-10-18
2024-04-25
Loading full text...

Full text loading...

References

  1. Al-Rbeawi, S., & Owayed, J.
    (2019). Analytical and numerical analysis for temporal anomalous diffusion flow in unconventional fractured reservoirs. SPE Middle East Oil and Gas Show and Conference, MEOS, Proceedings, 2019-March, 1–25. https://doi.org/10.2118/194831-ms
    [Google Scholar]
  2. CMG-GEM
    . (2019). Reservoir simulator for compositional, chemical and unconventional reservoir modelling. 10–13.
    [Google Scholar]
  3. Hudson, P. J., Matson, R. P., & BJ-Services
    . (1992). Hydraulic Fracturing in Horizontal Wellbores. Society of Petroleum Engineers Inc., 12(6), 101–110. https://doi.org/10.15593/22249923/2013.6.11
    [Google Scholar]
  4. MATLAB
    . (2019). MATLAB. 1–2.
    [Google Scholar]
  5. Medeiros, F., Ozkan, E., & Kazemi, H.
    (2008). Productivity and drainage area of fractured horizontal wells in tight gas reservoirs. SPE Reservoir Evaluation and Engineering, 11(5), 902–911. https://doi.org/10.2118/108110-pa
    [Google Scholar]
  6. Ozkan, E., Brown, M., Raghavan, R., & Kazemi, H.
    (2011). Practical solutions for pressure-transient responses of fractured horizontal wells in unconventional shale reservoirs. SPE Reservoir Evaluation and Engineering, 14(6), 663–676. https://doi.org/10.2118/125043-PA
    [Google Scholar]
  7. Stehfest
    . (1967). Numerical inversion of Laplace transform. Calcolo, 4(1), 107–116. https://doi.org/10.1007/BF02641647
    [Google Scholar]
  8. Van Everdingen, A. F., & Hurst, W.
    (1949). The Application of the Laplace Transformation to Flow Problems in Reservoirs. Journal of Petroleum Technology, 1(12), 305–324. https://doi.org/10.2118/949305-g
    [Google Scholar]
  9. Wei, Y., & Economides, M. J.
    (2005). Transverse hydraulic fractures from a horizontal well. Proceedings – SPE Annual Technical Conference and Exhibition, 25–36. https://doi.org/10.2523/94671-ms
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.202011427
Loading
/content/papers/10.3997/2214-4609.202011427
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error