1887

Abstract

Summary

Faults and fractures are important fluid pathways in subsurface energy reservoirs. Especially in geothermal energy production, hydrocarbon production, and energy storage in the deep subsurface, fractures can enhance reservoir quality and production- or storage potential. In subsurface reservoirs however, mineral precipitations often reduce available fracture apertures, and thus fracture porosity and permeability. The present study is performed on a homogeneous, massive marine Sandstone (Bentheimer Sandstone from Gildehaus Quarry, Lower Saxony, Germany, Lower Cretaceous) and a heterogeneous, laminated fluvial sandstones (grès vosgien from Cleebourg, Alsace, France, Lower Triassic). Hydrothermal flow-through experiments are performed at 420 °C and 30 MPa for 72 hours to compare resulting precipitated cement textures on fracture analog surfaces.

The experiments reveal a heterogeneous development of syntaxial overgrowth cements. Homogeneous sandstone, composed of similar grain sizes and quartz grains, show a homogeneous formation of overgrowths. Heterogeneous sandstones, composed of laminae with different grain sizes and variable detrital grain compositions, show smaller overgrowths on finer grained laminae when compared to coarser grained laminae.

The sedimentary texture might thus be an additional factor to consider when assessing mineral precipitations in fractures and their influence on subsurface fluid flow.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.202021017
2020-11-16
2024-03-28
Loading full text...

Full text loading...

References

  1. Busch, B., Adelmann, D., and Hilgers, C.
    , 2018. Reservoir quality modeling in deeply-buried Permian Rotliegendes sandstones, N-Germany.Impact of illite textures, EAGE Conference and Exhibition: Copenhagen, EAGE, p. 1–5.
    [Google Scholar]
  2. Lander, R. H., and Bonnell, L. M.
    , 2008. Toward more accurate quartz cement models: The importance of euhedral versus noneuhedral growth rates: AAPG Bulletin, v. 92, no. 11, p. 1537–1563.
    [Google Scholar]
  3. Lander, R. H., and Laubach, S. E.
    , 2014. Insights into rates of fracture growth and sealing from a model for quartz cementation in fractured sandstones: Geological Society of America Bulletin, v. 127, no. 3–4, p. 516–538.
    [Google Scholar]
  4. Laubach, S. E., Fall, A., Copley, L. K., Marrett, R., and Wilkins, S. J.
    , 2016. Fracture porosity creation and persistence in a basement-involved Laramide fold, Upper Cretaceous Frontier Formation, Green River Basin, USA: Geological Magazine, v. 153, no. 5–6, p. 887–910.
    [Google Scholar]
  5. Manning, C. E.
    , 1994. The solubility of quartz in H2O in the lower crust and upper mantle: Geochimica et Cosmochimica Acta, v. 58, no. 22, p. 4831–4839.
    [Google Scholar]
  6. Okamoto, A., Saishu, H., Hirano, N., and Tsuchiya, N.
    , 2010. Mineralogical and textural variation of silica minerals in hydrothermal flow-through experiments: Implications for quartz vein formation: Geochimica et Cosmochimica Acta, v. 74, no. 13, p. 3692–3706.
    [Google Scholar]
  7. Okamoto, A., and Sekine, K.
    , 2011. Textures of syntaxial quartz veins synthesized by hydrothermal experiments: Journal of Structural Geology, v. 33, no. 12, p. 1764–1775.
    [Google Scholar]
  8. Prajapati, N., Gonzales, A. A., Selzer, M., Nestler, B., Busch, B., and Hilgers, C.
    , 2020. Quartz Cementation in Polycrystalline Sandstone: Insights from Phase-field Simulations: JGR: Solid Earth.
    [Google Scholar]
  9. Prajapati, N., Selzer, M., Nestler, B., Busch, B., and Hilgers, C.
    , 2018a. Modeling fracture cementation processes in calcite limestone: a phase-field study: Geothermal Energy, v. 6, no. 7, p. 15.
    [Google Scholar]
  10. Prajapati, N., Selzer, M., Nestler, B., Busch, B., Hilgers, C., and Ankit, K.
    , 2018b. Three-Dimensional Phase-Field Investigation of Pore Space Cementation and Permeability in Quartz Sandstone:Journal of Geophysical Research: Solid Earth.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.202021017
Loading
/content/papers/10.3997/2214-4609.202021017
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error