1887

Abstract

Summary

During the development of hydrocarbon fields geomechanical characteristics of rocks change under the effect of nonlinear dynamic loads. Elasticity modulus is one of the most important characteristics of mechanical properties of rocks used in engineering. It is known that the elasticity modulus of dry rocks does not depend on the frequency of the applied load. However, dispersion of elastic moduli in dry sedimentary rocks still exists. The mechanism, in accordance with which dispersion of the dynamic component of elastic modulus occurs, remains not fully disclosed. Studies on the dispersion of the dynamic component of the elasticity modulus under the influence of uniaxial dynamic loads are conducted on dry sandstone samples in the zone of linear elasticity. Physically substantiated relations are proposed. The nonlinear nature of the dynamic elasticity modulus under the influence of dynamic loads of given frequency and amplitude was confirmed. The obtained relations allow taking into account the influence of nonlinear dynamic loads on the elasticity modulus of the rock in the calculations when designing the development of hydrocarbon fields.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.202150026
2021-03-22
2024-04-25
Loading full text...

Full text loading...

References

  1. Behnoudfar, P., Hassani, A.H., Al-Ajmi, A.M., Heydari, H.
    [2016] A novel model for wellbore stability analysis during reservoir depletion. Journal of Natural Gas Science and Engineering, 35 (Part A), 935–943.
    [Google Scholar]
  2. Jaeger, J.C., Cook, N.G.W., Zimmerman, R.W.
    Laboratory testing of rocks. In Fundamentals of Rock Mechanics, 4th ed.; Blackwell Publishing: Malden, MA, USA, 2007; pp. 145–167.
    [Google Scholar]
  3. Lozovyi, S., Bauer, A.
    [2019] Static and dynamic stiffness measurements with Opalinus Clay. Geophysical Prospecting, 67 (4), 997–1019.
    [Google Scholar]
  4. Mikhaltsevitch, V., Lebedev, M., Gurevich, B.
    [2014] A laboratory study of the elastic and anelastic properties of the sandstone flooded with supercritical CO2 at seismic frequencies. Energy Procedia, 63, 4289–4296.
    [Google Scholar]
  5. Peng, K., Zhou, J., Zou, Q., Song, X.
    [2020] Effect of loading frequency on the deformation behaviours of sandstones subjected to cyclic loads and its underlying mechanism. International Journal of Fatigue, 131, 105349.
    [Google Scholar]
  6. Pimienta, L., Fortin, J., Guéguen, Y.
    [2016] Effect of fluids and frequencies on Poisson’s ratio of sandstone samples. Geophysics, 81 (2), D183-D195.
    [Google Scholar]
  7. Riabokon, E.P.
    [2020] Laboratory study on the effect of elastic wave treatment on geomechanical and capillary properties of clastic reservoirs. Neftyanoe Khozyaystvo - Oil Industry, 4, 54–57.
    [Google Scholar]
  8. Spencer, J.W.Jr
    [1981] Stress relaxations at low frequencies in fluid-saturated rocks: attenuation and modulus dispersion. Journal of Geophysical Research, 86 (B3), 1803–1812.
    [Google Scholar]
  9. Tutuncu, A.N., Podio, A.L., Gregory, A.R., Sharma, M.M.
    [1998] Nonlinear viscoelastic behavior of sedimentary rocks, Part I: Effect of frequency and strain amplitude. Geophysics, 63 (1), pp. 184–194.
    [Google Scholar]
  10. Xia, K., Yao, W., Wu, B.
    [2017] Dynamic rock tensile strengths of Laurentian granite: Experimental observation and micromechanical model. Journal of Rock Mechanics and Geotechnical Engineering, 9 (1), 116–124.
    [Google Scholar]
  11. Zhang, Q.B., Zhao, J.
    [2014] A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock Mechanics and Rock Engineering, 47 (4), 1411–1478.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.202150026
Loading
/content/papers/10.3997/2214-4609.202150026
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error