1887
PDF

Abstract

Summary

Phase section intervals experimental studies of the linear basis at the initial Berezhany scientific geodetic polygon were carried out. The determination of the base intervals based on the differences of the measured lines from three points of the reference line with a Leica TCRP 1201 total station in three steps with the ATR function enabled (aiming at the target by the maximum of the reflected signal). Forced centering screws on pipe marks and ball reflectors are used to measure the lines. This provided a mean square deviation of the determination of the intervals of 0.2 mm.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.2023510009
2023-10-02
2025-06-20
Loading full text...

Full text loading...

/deliver/fulltext/2214-4609/2023/geoterrace-2023/GeoTerrace-2023-009.html?itemId=/content/papers/10.3997/2214-4609.2023510009&mimeType=html&fmt=ahah

References

  1. Instructions for topographic surveying in scales 1:5 000. 1:2 000. 1:1 000 ta 1:500, HKNTA-2.04-02-98, HUHK ta KU, (1999).
    [Google Scholar]
  2. Flat screw for fastening geodetic devices with centring plates of pipe marks [Stanovyy hvynt dlya skriplennya heodezychnykh pryladiv z tsentruval’nymy plytamy trubnykh znakiv], Ukrainian Patents 145153, 25.11.2020.
    [Google Scholar]
  3. Kolhunov, V., Litynskyy, V., Savchuk, S. (2004). Application of GPS observations to measure the Berezhny linear basis [Zastosuvannia GPS-sposterezhen dlia vymiriuvannia Berezhanskoho liniinoho bazysu], Modern achievements of geodetic science and production, 83–85. (In Ukrainian)
    [Google Scholar]
  4. Kostets’ka, Ya., & Bletskan, V. (2020) Working out the results of the study of instrument correction of total stations using the measurement of line segments in all combinations [Opratsyuvannya rezul’tativ doslidzhennya pryladovoyi popravky takheometriv za dopomohoyu vymiryuvannya vidrizkiv liniyi u vsikh kombinatsiyakh], Geodesy and geodynamics, II, 22, 109–111. (In Ukrainian)
    [Google Scholar]
  5. Lityns’kyy, V. (2010). The method of fixing vertical and horizontal vibrations of sighting targets. [Sposib fiksatsii vertykalnykh i horyzontalnykh dryzhan vizyrnykh tsilei], Modern achievements of geodetic science and production, 19, 87–90. (In Ukrainian)
    [Google Scholar]
  6. Lityns’kyy, V., Kolgunov, V., Muha, V., Garasymchuk, I. (2003). Using the Berezhany linear basis for the study of light rangefinders [Vykorystannya Berezhans`kogo linijnogo bazysu dlya doslidzhennya svitloviddalemiriv], Modern achievements of geodetic science and production, 2003. 175–177. (In Ukrainian)
    [Google Scholar]
  7. Litynskyy, V., Kolhunov, V., Mukha, V., & Vashchenko, V. (2003). About the creation of the Berezhan linear base [Pro stvorennya Berezhans’kogo liniynogo bazysa], Geodesy, cartography and aerial photography, 64, 33–36. (In Ukrainian)
    [Google Scholar]
  8. Pokotylo, I., Korliatovych, T., Perii, S., Tarnavskyi, V., & Vovk, A. (2020) Geodetic monitoring of meter intervals of the Berezhany basis. In international Conference of Young professionals “GeoTerrace-2020”. (2020 1. pp. 1–5). doi: 10.3997/2214‑4609.20205747.
    https://doi.org/10.3997/2214-4609.20205747 [Google Scholar]
  9. Trevoho, I., & Tsyupak, I. (2014). Peculiarities of metrological attestation of reference geodetic bases [Osoblyvosti metrolohichnoyi atestatsiyi etalonnykh heodezychnykh bazysiv], Modern achievements of geodetic science and production, 1, 29–33. (In Ukrainian)
    [Google Scholar]
/content/papers/10.3997/2214-4609.2023510009
Loading
/content/papers/10.3997/2214-4609.2023510009
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error