1887

Abstract

Summary

This research aims to investigate and compare the ultimate recovery from the largest oil reserve in Turkey (1.85 billion barrels) using a new method called mining-assisted heavy oil production (MAHOP) with conventional SAGD. Tunnels will be excavated from the surface to the reservoir. Fan-shaped up holes will then be drilled in the reservoir from the tunnels.

Heavy oil production through these tunnels will be explored using SAGD method. Several numerical models have been designed using CMG’s STARS simulator. Since the fan wells are opened vertically and at certain intervals along the tunnel, both a tight vertical fracturing of these wells and a separate fracture network formed by micro fractures in the vicinity of the fan holes are formed.

The validation of these hypotheses has been conducted in CMG which showed that MAHOP gave better results compared to conventional SAGD where two horizontal wells are used. MAHOP gave better recovery values with less steam oil ratios. With the results of the simulation study a laboratory model was designed. Experimental operational parameters using three different wettability cases were simulated to observe recovery by considering several possible physical effects such as steam distillation and in-situ upgrading. Saturation and pressure distributions were also obtained.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.202012066
2020-12-08
2024-04-26
Loading full text...

Full text loading...

References

  1. Akin, S., Celebioglu, D., Kalfa, Ü.
    Optimum Tertiary Steam-Injection Strategies for Oil-Wet Fractured Carbonates” SPE 120168 presented at the 2009 SPE Western Regional Meeting held in San Jose, California, USA, 24–26 March2009.
    [Google Scholar]
  2. Arslan, I., Akin, S., Karakece, Y., Korucu, O.
    Is Bati Raman Heavy Oil Field a Triple Porosity System?” SPE 111146 presented at the 2007 SPE/EAGE Reservoir Characterization and Simulation Conference held in Abu Dhabi, U.A.E., 28–31 October2007.
    [Google Scholar]
  3. Babadagli, T., Sahin, S., Kalfa, U., Celebioglu, D., Karabakal, U., and Topguder, N. N.
    (2009). Evaluation of steam injection potential and improving ongoing CO2 injection of the Bati Raman field, Turkey.Journal of Petroleum Science and Engineering, 68(1–2), 107–117.
    [Google Scholar]
  4. Canbolat, S., Akin, S., & Kovscek, A. R.
    (2004). Noncondensable gas steam-assisted gravity drainage.Journal of Petroleum Science and Engineering, 45(1–2), 83–96.
    [Google Scholar]
  5. Chertenkov, M. V., Mulyak, V. V., & Konoplev, Y. P.
    (2012). The Yarega heavy oil field-history, experience, and future.Journal of petroleum technology, 64(04), 153–160.
    [Google Scholar]
  6. Kantar, K., Karaoguz, D., Issever, K., & Varana, L.
    (1985). Design concepts of a heavy-oil recovery process by an immiscible CO2 application.Journal of petroleum technology, 37(02), 275–283.
    [Google Scholar]
  7. Karaoguz, O. K., Topguder, N. N., Lane, R. H., Kalfa, U., & Celebioglu, D.
    (2004). Improved Sweep in Bati Raman Heavy-Oil CO2Flood: Bullhead Flowing Gel Treatments Plug Natural Fractures. In SPE/DOE Symposium on Improved Oil Recovery. Society of Petroleum Engineers.
    [Google Scholar]
  8. Sahin, S., Kalfa, U., Celebioglu, D., Duygu, E., & Lahna, H.
    (2012). A quarter century of progress in the application of CO2 immiscible EOR project in Bati Raman heavy oil field in Turkey. In SPE Heavy Oil Conference Canada. Society of Petroleum Engineers.
    [Google Scholar]
  9. Sahin, S., Kalfa, U. and Celebioglu, D.
    , (2007), Bati Raman Field Immiscible CO2 Application—Status Quo and Future Plans, (SPE 106575) SPE Latin American & Caribbean Petroleum Engineering Conference, Buenos Aires, 15–18 April.
    [Google Scholar]
  10. Sahin, S., Kalfa, U, Uysal, S., Kilic, H, and Lahna, H.
    , (2014), Design, Implementation and Early Operating Results of Steam Injection Pilot in already CO2 Flooded Deep-Heavy Oil Fractured Carbonate Reservoir of Bati Raman Field, Turkey, SPE-169035, SPE Improved Oil Recovery Symposium held in Tulsa, Oklahoma, USA, 12–16 April.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.202012066
Loading
/content/papers/10.3997/2214-4609.202012066
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error