- Home
- Conferences
- Conference Proceedings
- Conferences
Second EAGE Sustainable Earth Sciences (SES) Conference and Exhibition
- Conference date: 30 Sep 2013 - 04 Oct 2013
- Location: Pau, France
- ISBN: 978-90-73834-53-8
- Published: 30 September 2013
74 results
-
-
A Coupled Semi-analytical Approach for the Evaluation of CO2 Injection Induced Surface Uplift and Caprock Deflection
More LessThis study focuses on a specific problem related to the surface uplift induced by the injection of CO2 at depth. The adopted methodology includes the development of a mathematical model that incorporates deformable behaviour of storage mediums and two immiscible fluids (CO2 and water) flow within the aquifers while surface rock or caprock layer is modelled as a thin plate. Governing equations are solved for the axisymmetric flexure deflection due to a constant rate injection of CO2. Numerical results show that this semi-analytical solution is capable to capture the pressure build-up during the very early stage of injection, resulting in a high rate surface uplift. It can be employed as a preliminary design tool for risk assessment such as injection rate, porosity, rock properties and geological structures. This semi-analytical solution provides a convenient way to estimate the influence of high rate injection of CO2 on the caprock deformation. The methodology in this development can easily incorporate other pressure distributions. Thus one can benefit from the advances in hydrology researches as well.
-
-
-
Calculating the Effects of Stress on Fracture Anisotropy and CO2 Flow Vectors
Authors P.S. Ringrose, C.E. Bond and R. WightmanIn this paper, we demonstrate the importance of predicting the effects of fracture networks on flow, using a case study from the In Salah CO2 storage site in Algeria. We show how fracture permeability is closely controlled by the stress regime determining the conductive fracture network, and that the anisotropy of the conductive network is reflected in surfaces deformation imaged by InSAR. Our results demonstrate that fracture network prediction combined with present day stress analysis can be used to successfully predict CO2 movement in the sub-surface.
-
-
-
The Mapping of Clay Bearing Fractures from Well Logs with a Neural Network and Their Implications for Rock Mechanics
By C. MellerKnowledge of petrophysical and mineralogical parameters in a geothermal reservoir is essential for the estimation of rock mechanical behaviour during hydraulic stimulation. The strength of a rock is determined by manifold petrophysical parameters. Most parameters can only be indirectly measured via different logging techniques. Logging data represent the petrophysical parameters in a multidimensional way. Neural networks are well-suited to deal with datasets of such large dimensions. We describe a neural network (NN) based method to map clay bearing fracture zones indirectly from spectral gamma logs. Thus, a semi-quantitative synthetic log is created showing the clay content along the wells. Laboratory measurements complement the study with respect to the implication of clay appearance for the mechanical behaviour of the rock. It is shown that the NN method is suitable to create synthetic clay logs. Combined with laboratory mechanical measurements this tool helps estimating the response of the reservoir rock to changes in stress field or pore pressure.
-
-
-
Simulation of Hydraulic Fracture Propagation Using XFEM
Authors A. Gholami, S.S. Rahman and S. NatarajanInducing hydraulic fractures is vital in developing enhanced geothermal systems. To the same extent, simulation of such fluid-driven fractures is a complicated process to model even for simple geometries. This difficulty is subjected to the moving boundary conditions due to propagation of crack, non-linear governing equations of fluid flow within the fractures and the high gradient of mechanical deformation near the fracture tip. This paper presents an XFEM framework developed for numerical modeling of hydraulically induced fractures in a porous media interacting with the flow of fluid. This model takes the fully coupled hydro-mechanical processes into account and also, uses the concept of cohesive crack which is more suitable to describe the nonlinear behavior of the quasi-brittle material in the fracture process zone.
-
-
-
Experimental and Numerical Study of CO2-water-minerals Interactions Applied to Rousse Reservoir Rock
Authors O. Sissmann, P. Bachaud, T. Parra, M. Chardin and M. MassonOver two years and a half, about 45,000 tons of CO2 have been injected in the depleted Mano reservoir of Rousse field, in the south-west of France. In order to study the mineral reactivity of this storage, a laboratory-scale CO2-exposure 24 months-long experiment was conducted on reservoir rock samples at in situ temperature and pressure conditions. Periodic rock sampling and microprobe elementary maps allowed the identification of main mineralogical transformations. Fluid composition was regularly analyzed and used in numerical speciation calculations. The combination of experimental characterization and batch simulations allowed the proposition of a reaction path and evidenced potential CO2 mineralization.
-
-
-
Reactive Surface Area in Geochemical Models - Lessons Learned from a Natural Analogue
Authors M. Koenen and L.J. WaschMany uncertainties exist in geochemical modeling. Mineral reactive surface area is one of the uncertain parameters. QEMSCAN analyses are performed on sandstone samples from a Dutch CO2 natural analogue to determine reactive surface areas. Geochemical modeling is performed using QEMSCAN surface areas and surface areas which are conventionally used in modeling. The model predicts that the QEMSCAN reactive surface areas result in higher reaction rates and faster equilibration of the sandstones with CO2. The fact that reactions are predicted to occur in a sandstone which has been in contact with CO2 for geological times suggests that the reservoir mineralogy is not yet in equilibrium with CO2. This would indicate that, even if mineral reactive surface areas are determined in detail, geochemical models strongly overestimate reaction kinetics. Other uncertain parameters which can affect kinetics, like mineral nucleation and ion diffusion, should be evaluated in order to be able to better predict long-term CO2-mineral reactions and storage integrity.
-
-
-
Reactive Fluid Flow Simulations for Modelling the CO2 Injection in the Rousse Depleted Gas Reservoir
Authors N. Maurand, T. Parra and A. MichelThis study focuses on the evolution of the fluid-rock interactions during the reservoir production of the Rousse field, followed by the injection of hypothetical 100000 tonnes of CO2. The study of reactive flow continues post-injection up to 10000 years. 0D numerical simulations with geochemical software Arxim were performed on several mineral assemblages to study the geochemical reactions due to the variation of reservoir pressure between the beginning and the end of the production as well as the impact of the CO2 injection. These simulations were supplemented by 3D numerical triphasic compositional reactive simulations at the reservoir scale with CooresTM simulator.
-
-
-
A Comparative Study of Reactive Transport Modelling Using ToughReact and MoReS for Modelling CO2 Sequestration
Authors T.J. Tambach, C.H. Pentland, G. Zhang, H. Huang and J.R. SnippeThe goal of this work is to simulate CO2 storage in a deep saline aquifer case that is currently considered for field injection. Results of RTM are obtained using both TOUGHREACT and the in-house Shell reservoir simulator MoReS, which was recently coupled with the geochemical software PHREEQC. The obtained results are very similar when the same geochemical database and input parameters are used. Small changes in porosity, up to a maximum of 0.003, are computed as a result of dissolution and precipitation reactions. Benchmarking of simulation software is important for quality control and confidence in obtained results.
-
-
-
Diagenesis of Fractured Buntsandstein Geothermal Reservoirs, Upper Rhine Graben, Germany
Authors D. Soyk, M. Fensterer, J. Bauer and T. BechstädtPrediction and modelling of subsurface geothermal reservoir properties without knowledge of the diagenesis are unconfident. Diagenesis controls both matrix porosity / permeability and mechanical rock properties by cementation and leaching processes. Simultaneously occurring with (brittle) deformation, diagenesis can also influence fracture formation. Here an integrated approach to the characterisation of geothermal reservoirs with focus on diagenesis is presented.
-
-
-
Assesment of Hydrogen Rock Interaction During Geological Storage of CH4-H2 Mixtures
By M.P. PichlerRenewables suffer from fluctuating energy generation, which means that they generate energy overspills during beneficial weather conditions which, due to lack of large scale storage options, cannot be used at a later point but is wasted. A viable option would be to convert the energy into hydrogen and to store it in existing porous subsurface formations. To assess the influence of hydrogen rock interaction during underground storage of natural gas hydrogen mixtures in porous subsurface formations, a geochemical gibbs free energy simulation was done. The simulation was conducted for the mineral assembly of two existing porous subsurface formations. The model showed that hydrogen increases the pH, and therefore changes the mineral composition of the reservoir rock by dissolving dolomite and precipitating calcite and talc. Additional investigations included crystalline mine rals which were not affected and clay minerals which could not be assessed as reliable data for these minerals is not yet available. Finally the stability of sulphides was assessed to rule out the possible generation of H2S. It was found that under subsurface conditions, sulphides will stay stable
-
-
-
Model Calibration on Cement Experiments at Realistic CO2 Storage Conditions
Authors L.J. Wasch, M. Koenen, J. Wollenweber, J.H. ter Heege and T.J. TambachLarge scale implementation of CO2 storage can significantly reduce emission of greenhouse gasses into the atmosphere. However, safe and long-term containment of CO2 in storage reservoirs must be ensured. Wellbores in the subsurface present possible leakage pathways for CO2 to the surface and hence wellbore cement reactivity is of major concern. Previous experimental studies of cement reactivity often use high brine to cement ratios which may lead to overestimations of the rate of cement alteration. We aim to study cement reactivity under more realistic CO2 storage conditions. Limited brine is used to represent a wellbore environment with brine mainly present in pore space. The experimental results show a cease or significant reduction of reaction progression after 7 days due to saturation of the fluid. This inhibits further cement dissolution and re-dissolution of secondary calcite. The observed reaction zones are matched by geochemical modeling, showing from core to rim: unreacted cement (zone A), portlandite dissolution and increased porosity (zone B), major calcite and reduced porosity plus minor ferrihydrite precipitation (zone Ci) and minor calcite precipitation (zone Cii). The calibration of the geochemical model aids the development of an accurate reactive transport model for long-term cement alteration and integrity prediction.
-
-
-
CO2-Dissolved - A Novel Approach to Combining CCS and Geothermal Heat Recovery
Authors C. Kervévan, F. Bugarel, X. Galiègue, Y. Le Gallo, F. May, K. O‘Neil and J. SterpenichThis paper presents the outline of the CO2-DISSOLVED project whose objective is to assess the technical-economic feasibility of a novel CCS concept integrating geothermal energy recovery, aqueous dissolution of CO2 and injection via a doublet system, and an innovative post-combustion CO2 capture technology. Compared to the use of a supercritical phase, this approach offers substantial benefits in terms of storage safety, due to lower brine displacement risks, lower CO2 escape risks, and the potential for more rapid mineralization. However, the solubility of CO2 in brine will be a limiting factor to the amount of CO2 that can be injected. Consequently, and as another contributing novel factor, this proposal targets low to medium range CO2 emitters (ca. 10-100 kt/yr), that could be compatible with a single doublet installation. Since it is intended to be a local solution, the costs related to CO2 transport would then be dramatically reduced, provided that the local underground geology is favorable. Finally, this project adds the potential for energy and/or revenue generation through geothermal heat recovery. This constitutes an interesting way of valorization of the injection operations, demonstrating that an actual synergy between CO2 storage and geothermal activities may exist.
-
-
-
How Does IOR Impact GHG Intensity of Oil Production? - An Example from the NCS
Authors R.L.J. Steeneveldt, S. Kerr, N. Aas, J. Pettersen, C. Solli and C. HungIn this study we present a life cycle assessment model for a subset of EOR techniques applied to a field on the Norwegian Continental Shelf, focusing on a few select techniques, including polymer injection. The purpose is to document the impact of enhanced oil production on the emissions- intensity of the added barrels, for example kgCO2e/bbl. Processes considered include offshore vessels, logistics, waste treatment, injection energy, chemical manufacturing and transport, water desalination processes and associated chemicals and equipment, heating and electricity generation. The case where limited platform space is available is also presented. Results focus on the change in climate change potential for added production and will be contextualized by a comparison to conventional production and more energy-intensive production from, for example, Canadian oil sands. The model may be considered generic for most offshore locations, though conclusions drawn are specific to the case under evaluation. The results clearly support the importance of a life-cycle approach to identify all emission sources for enhanced oil recovery.
-
-
-
An Approach to Risk Modelling for Sustainable Utilization of Subsurface Space
Authors S. Solomon and T. FlachUse of the subsurface has become steadily more intensive and globalized. This is due to wider application of conventional uses and to the emergence of relatively new, unconventional uses. This raises the question of whether we are managing the subsurface space in a sustainable way that also enables us to understand and mitigate the risks that may emerge. Depending on the purpose of subsurface space use, typical risk challenges may include e.g. impacts to groundwater, oil and gas resources. Expanding uses of the subsurface motivates additional effort to mitigate well-known and relatively new risks. Estimating risk levels in complex systems can be a daunting task if the strategy is to construct simulation models of all known physical processes combined with uncertainties in the system, which for subsurface projects, often dominate the system description. An alternative approach described here isolates the main risk drivers in a high-level probabilistic format known as a Bayesian (Belief) Network (BN). The BN approach accommodates more general relationships between uncertain variables than event or fault trees and allows expression of probabilities to consistently influence the top-level risk indicators. A BN risk model will typically be more compact and legible than its fault/event tree equivalent.
-
-
-
Coupled Modelling of CO2 Injection into a Realistic North Sea Aquifer
More LessThe work describes the use of coupled reservoir simulation geomechanical modelling to investigate the potential for geomechanical failure within a saline aquifer subjected to CO2 injection for geological storage. The model was based on a realistic North Sea (Forties Sandstone) formation. The work was carried out as part of the UK Storage Appraisal Project and was mainly concerned with issues of injection pressure, injectivity and thereby storage capacity. The default criterion within the project was to consider a maximum injection pressure based on (hydraulic) fracture pressure gradient. The geomechanical modelling work was carried out to see if there was any scope to change this based on other potential modes of geomechanical failure. The results show that for the scenarios modelled, geomechanical failure is unlikely in the formation providing the injection rate is controlled so that the injection pressure does not exceed the fracture pressure at the well.
-
-
-
The Norwegian CO2 Storage Atlas
Authors E. Halland and J. MujezinovicThe CO2 storage atlas of the Norwegian part of the North Sea and Norwegian Sea has been prepared by the Norwegian Petroleum Directorate at the request of the Ministry of Petroleum and Energy. The main objectives have been to identify the safe and effective areas for long-term storage of CO2 and to avoid possible negative interference with ongoing and future petroleum activity. 27 geological formations have been individually assessed, and grouped into saline aquifers. The assessed aquifers have been ranked according to guidelines which have been developed for this study. The evaluation of geological volumes suitable for injecting and storing CO2 can be viewed as a step-wise approximation as shown in the maturation pyramid. A modeling study will be presented to understand the timing and extent of long distance CO2 migration
-
-
-
Comparative Study of CO2 Mass Quantification Using Process Modelling and Geophysical Techniques
Authors K. Benisch, D. Köhn, S. al Hagrey, W. Rabbel and S. BauerThis paper presents the application and verification of a combined seismic and geoelectrical monitoring approach for CO2 storage using a virtual test side in the North German Basin. It is found, that the sensitivity of both methods to CO2 phase saturation is complementary, with the seismic reflection coefficient being most sensitive at low CO2 saturations and the resistivity being most sensitive at high saturations promising a comprehensive monitoring of the sequestration process. An integrated workflow is developed for the method assessment. Thereby, results of a numerical flow simulation (phase saturation, density, pore pressure, porosity and permeability) are used to simulate synthetic seismic and resistivity data for a realistic geophysical survey. From the synthetic data, changes of P- and S-wave velocities are calculated using 2D elastic time-lapse full waveform inversion and resistivity changes are calculated using borehole resistivity tomography. With that, the original CO2 phase distribution can be determined. The resulting CO2 mass estimation is then compared to the results of the CO2 mass distribution of the numerical flow simulation.
-
-
-
A Robust Multi-criterion Optimization of CO2 Sequestration Under Model Uncertainty
Authors R. Petvipusit, A.H. Elsheikh, T. Laforce, P.R. King and M.J. BluntSuccessful CO2 storage in deep saline aquifers relies on economic efficiency, sufficient capacity and long-term security of the storage formation. Unfortunately, these three criteria of CO2 storage are generally in conflict, and often difficult to guarantee when there is a lack of geological characteristics of the storage site. We overcome these challenges by developing: 1) multiwell CO2 injection strategies using a multi-criterion optimization to handle conflicting objectives; 2) CO2 injection management that is robust against model uncertainty. PUNQ-S3 model was modified as a leaky storage to study injection strategies associated with the risks of CO2 leakage under geological uncertainty. Based on our numerical results, the NSGA-II with the ASGI technique can effectively obtain a set of efficient-frontier injection strategies. For the uncertainty assessment, the impact of the model uncertainty to the outcomes is significant. Therefore, our findings suggest using the mixture distribution of the objective-function values, as opposed to the traditional Gaussian distribution to cover model uncertainty
-
-
-
Characterisation of Sub-sea CO2 Storage Complexes - Focus on the Greater Sleipner Area
Authors A. Furre, A.D. Janbu and S. HagenCarbon capture and storage (CCS) is one proposed way of mitigating greenhouse gas emissions. Statoil’s experience with CCS, both from operating the Sleipner project in the North Sea and the Snøhvit project in the Barents Sea provides a useful basis for understanding what is important for assessing long term integrity of storage sites in general. One of the lessons learned is the importance of collecting data form a wider area and volume around the storage site. In this paper we will present the value of characterising and monitoring the storage complex, using the Sleipner storage site as an example.
-
-
-
Pressure Effects Caused by CO2 Injection in the Snøhvit Field
Authors S. Grude, J. Dvorkin, A. Clark, T. Vanorio and M. LandrøA rock physics diagnostics study is performed for the Tubåen formation in the Snøhvit field with the aim of characterizing the transport properties for the different sand intervals. This is combined with co2 injection laboratory experiments for selected plugs from the sand intervals to understand the impact the CO2 injection have on the microstructure of the rock framework and its physical properties. The rock physics diagnostic indicates that parts of the Tubåen formation are dominated by stiff load bearing contact cement, other parts by pore-filling grains that can be related to poor sorting, and that don’t contribute to the stiffness of the rock. Some of these fine particles may become dislodged due to CO2 injection, which permanently changes the load bearing framework of the formation. The laboratory experiments and SEM images indicate that the CO2 injection cause a re-arrangement of the rock framework and of the movable fines that change the rock framework. The importance of fines migration is likely to depend on the initial microstructure of the rock. The results of the ongoing laboratory experiments will help to better understand the effect on the different sand intervals of the Tubåen formation.
-
-
-
Study of Recorded Seismicity at the In Salah (Algeria) Carbon Capture and Storage Project
Authors A.L. Stork, J.P. Verdon and J.M. KendallThe In Salah Joint Venture carbon capture and storage project at Krechba, Algeria began injecting CO2 in 2004. This study makes use of microseismic event data recorded by a single geophone. Information from shear waves enables fracture directions and densities to be inferred and we find fractures striking N145°E, in agreement with the regional direction of maximum horizontal stress. There is no evidence for any temporal change in shear-wave splitting parameters in the time frame studied. This implies that CO2 injection is reactivating pre-existing fractures. We are able to obtain only very approximate event locations which suggest that events occur at or below the reservoir level, with no change over time.
-
-
-
Effective Detection Capability of a Local Seismic Network
By E. GaucherIn applications such as geothermal energy, underground storage, mining, hydraulic fracturing, it becomes current practice to implement local seismic networks to monitor induced seismicity and to help mitigating the associated risks. In such contexts, it is crucial to guarantee that the network is able to detect a seismic event of predefined magnitude in a specific area. We propose a method to estimate this detection capability for existing kilometric-scale seismic networks which did not record any seismicity in the target zone yet. However, the network should be running for a time period long enough to record several local events listed in a reference catalogue. These earthquakes are used to calibrate an amplitude-magnitude relationship, knowing that the amplitudes are at the basis of the detection of seismic event candidates. This observation-based approach can take into account uncertainties in the magnitude estimate. The procedure was applied on the seismic network deployed over Bruchsal (Germany) geothermal field. Since mid-2010, no seismicity in the reservoir has been recorded by the network despite its good working order. The proposed technique suggests that there is 95% probability that no seismic event with ML ≥ 0.7 occurred below the network down to the reservoir depth at 2400 m.
-
-
-
A Comparison of Geomechanical Effects at Three 'Megatonne' CO2 Storage Sites - Sleipner, Weyburn and In Salah
Authors J.P. Verdon, J.M. Kendall, A.L. Stork, R.A. Chadwick, D.J. White and R.C. BissellOne of the major leakage risks during CO2 sequestration operations is that injection-induced geomechanical deformation may compromise the integrity of the sealing caprock through the creation or reactivation of fracture networks. In this paper we examine three major commercial-scale storage sites where CO2 is injected at rates approaching or greater than 1 megatonne of CO2 per year: Sleipner, Weyburn and In Salah. We find that deformation is controlled by the pore pressure increase during injection, meaning that large aquifers with good flow properties, such as Sleipner, represent the best targets for CO2 storage. Mature hydrocarbon reservoir targets, such as Weyburn, may already have a complex stress history with decades of production and fluid injection. In such cases numerical modelling is needed to fully understand a geomechanical response to CO2 injection that may not be expected or immediately intuitive. Where pore pressures do become elevated, such as at In Salah, deformation is likely to be more pronounced. In such situations, a comprehensive geomechanical monitoring and modelling program is recommended. In addition to our site-by-site analysis, we assess the efficacy of seismic, microseismic and geodetic methods for monitoring geomechanical deformation during operations.
-
-
-
Petrophysical Evaluation for a Geothermal Project in Tønder
Authors J. Sanchez and Y. OforiThe paper focuses on the petrophysical evaluation of wells for the development of a geothermal district heating plant in Tønder,Denmark. The evaluation was carried out by analysis and interpretation of available data. The data used included completion reports, well logs, conventional core and side wall core data. The results from interpretation of the data include total porosity, permeability, clay volume and effective porosity for three wells. An unusual finding was the inverse relationship between porosity and permeability in the targeted layer of the reservoir. This inverse relationship, maybe attributed to the precipitation of salt and the presence of caverns or fractures.
-
-
-
Late Field Life of the East Midlands Petroleum Province - A New Geothermal Prospect?
Authors C.M. Hirst, J.G. Gluyas and S.A. MathiasProduction data for the East Midlands Petroleum Province has been reviewed in order to ascertain peak production volumes for both oil and water. This has been used to provide a quantification of the available geothermal resource located within Carboniferous strata within the oil field. A conservative initial estimate of 3.6 MWt has been calculated for the Welton field, based on peak production volumes of just under 350,000 m3/year. Lincoln City, located 6 miles west of the field, could obtain just over 5% of its heating requirement by exploitation of this geothermal resource. Modification of existing oil well infrastructure can produce a cost effective way to extend the field life of onshore oilfields, significantly reducing the costs that are usually associated with geothermal exploration.
-
-
-
3D Seismic Exploration for Deep Geothermal Reservoirs in the Crystalline Basement in Germany
Authors H. von Hartmann, E. Lüschen, R. Thomas and R. SchulzA 100 sqkm seiscmic survey was acquired to search for faults in the crystalline basement of the Westerzgebirge (Saxony). The aim is to explore the crystalline basement for deep geothermal reservoirs over 5 km in depth . The subsurface is formed by large granitic intrusions which are partly covered by metaphorphc piles and the area is located in a main fault zone. The seismic image show a detailed structure of the granitic body and a complex fault system, which in this type was not predicted by the prelimenary study. The aim of the project, which is funded by the German Ministry of Environment, Nature Conservation and Nuclear Safety, is to adapt the seismic method for the exploration of deep geothermal reservoirs in the crystalline basement.
-
-
-
Geothermal Fluid and Reservoir Properties in the Upper Rhine Graben, Europe
By I. StoberHydraulic and hydrochemical data from several hundred deep wells in three different geothermal reservoirs of the Upper Rhine Graben area in France and Germany have been compiled, examined, validated, and analyzed with the aim to characterize the fluids and reservoir properties for supporting geothermal projects. The hydraulic conductivity of the examined geothermal reservoir formations are quite different and reflect the diverse flow structures of the fractured and the karstified rocks. The hydraulic conductivity decreases very little with depth, probably because the Upper Rhine Graben is a young tectonically active structure. The chemical composition of the waters at shallow depth (500 - 800 m) results from intensive chemical interaction with the rocks. The total of dissolved solids increases with depth and thermal waters in the three different aquifer formations all grade into NaCl-rich saline fluids independent of the dominant reservoir rock.
-
-
-
3D ERT in Boreholes for Mapping CAES Plume in Saline Aquifers
Authors S. Siebrands, S.A. Al Hagrey and W. RabbelRenewable energy resources are intermittent and need buffer storage to the bridge time-gap between production and demand peaks. North German Basin has a very large capacity for CAES in saline aquifers and cavities. Replacement of brine by gas in aquifer cause strong changes in electrical resistivity. Previously we have shown the applicability of 2D electric resistivity tomography (ERT) for monitoring sequestered CO2 in these reservoirs. Towards more real world problems, this paper aims at studying resolution of 3D ERT in boreholes for CAES mapping in deep saline aquifers. We used for this 3D surveys 3-9 vertical arrays of borehole electrodes installed surrounding the targets (caprock, aquifer, CAES plume, aquitard). We applied non classical electrode configurations of pseudo (optimized) and real 3D measurements in different boreholes. The results show that the applied 3D technique can generally map the dome structure targets with varying resolution, smearing and artefacts. However, resistivity amplitudes are less correctly recovered. The resolution increases with increasing number of borehole electrode arrays, increasing of layer thicknesses and the a priori fixing of boundaries in the inversion. Optimized 2D arrays have better resolution than the other arrays and thus needs to be developed to real 3D arrays.
-
-
-
Lacq Pilot - The History of Selecting the Reservoir, Injecting and On-going Long Term Stability Demonstration
Authors C. Prinet, J. Monne and S. ThibeauTotal is committed to reducing the impact of its activities on the environment, especially its greenhouse gas emissions. It has been involved in CO2 injection and geological storage for over 15 years, in Canada (Weyburn oil field) for EOR and Norway (Sleipner, Snohvit) for aquifer storage. In 2006, the company decided to invest 60 million euros to experiment CO2 capture, transportation and injection in a depleted gas reservoir. The pilot in the Lacq basin, was on stream from January 2010 to March 2013. This paper summarizes the main features encountered during the whole life of the project from: storage site selection including risk analysis and environmental impact studies, baseline preliminary monitoring, injection and monitoring-verification plan conducted, up to post-injection monitoring plan and long term stability on-going demonstration. After three years of injection, the monitoring of the Lacq french pilot has demonstrated that the CO2 remains so far well confined within the reservoir. Reservoir behavior was also well anticipated by dynamic models (low monitoring-models offset). As anticipated, no problem of injectivity was detected either. The post-injection monitoring plan, based on an update of the risk analysis is now being reviewed by French administration. Long term stability demonstration is still on-going.
-
-
-
Linking Microseismic Activity with CO2 Injection Data at In Salah, Algeria
Authors B.P. Goertz-Allmann, V. Oye, K. Iranpour, D. Kühn, E. Aker and B. BohloliWe analyse microseismic data from a pilot installation in the commercial sized CO2 injection project at Krechba, Algeria. Over 5000 microseismic events were detected from August 2009 to June 2011 using a master event waveform cross-correlation method. Most events can be directly related to the injection at well KB502. The period with the highest microseismic activity correlates with a period where the maximum applied pressure has most probably exceeded the minimum principal stress in the injection interval. Using S-P wave traveltime differences and event azimuth we can separate various distinct event clusters. Although an accurate event location is not possible due to the limited receiver network, the events most probably come from the injection reservoir interval. Moment magnitudes of the events have been determined and range between MW -1 and MW 0 with a few larger magnitude events up to MW 1. Differences in b-value between event clusters may give some insight about different types of fracturing and may be related to the in-situ stress regime.
-
-
-
Regional Simulations of the Well-related Migration Risk at Weyburn, the World’s Largest CO2 Project
More LessThe IEAGHG Weyburn-Midale CO2 Monitoring and Storage Project is an industrial-scale geological storage project associated with enhanced oil recovery at the Weyburn oil field, Saskatchewan, Canada. To date, over 17 Mt of CO2 has been stored at 1.4 km depth. The storage site and four overlying aquitards are penetrated by a large number of oil wells. The Weyburn region has more than 4,000 wells within a risk assessment area of 2,000 km2. This well density is typical of prospective CCUS storage areas in the USA and Canada. The average well separation is 275 meters, with about 5% of the population less than 20 meters apart. These wells are considered to have an elevated risk potential for leakage pathways above the storage site. The high well density and regional scale presents a major challenge for flow modeling. We use a hydrodynamic invasion percolation approach, assuming capillary limit conditions, to simulate CO2 migration throughout the region at a high resolution. The resolution is sufficient to identify wells that lie along migration pathways and trap structures where leakage may occur. This indicates a subset of 62 wells within the regional population of 4012 wells that are marked for further risk assessment.
-
-
-
The Validation of the Capture, Transportation and Storage of CO2 Sourced from a Coal-fired Power
Authors R.A. Esposito and G. HillIssues related to Carbon Capture and Storage (CCS) includes technical, economic, and public acceptance challenges. Only though field scale demonstration projects can industry address these challenges in preparation for commercial deployment. The capture component takes place at the James M. Barry Electric Generating Plant in Bucks, Alabama utilizing capture technology licensed by Mitsubishi Heavy Industries America. CO2 captured at the plant is being transported by pipeline for underground storage in a deep, saline geologic formation within the Citronelle Dome located in Citronelle, Alabama. A 12-mile pipeline was constructed to transport CO2 to the injection site located on the flank of Citronelle Dome. Operations started in 2012, up to 550 metric tons of CO2 per day, the equivalent emissions from 25 MW of the plant’s capacity are being captured. To date over 160 metric tons of CO2 have been captured and over 65,000 metric tons have been injected for storage. The injection target is the lower Cretaceous Paluxy Formation (a sandstone saline reservoir) which occurs at a depth of 2,865 meters (9,400 feet). Transportation and injection operations will continue for one to two years. Subsurface monitoring will be deployed through 2017 to track plume movement and monitor for leakage.
-
-
-
Different Stimulation Strategies to Enhance the Performance of Subsurface Feat Exchangers Based on Tensile Fractures
Authors M.P.D. Pluymaekers, J.D.A.M. van Wees, G.C. Hoedeman and P.A. FokkerTensile fraccing in non-critically stressed tectonic environments, such as occur in large parts of the Netherlands, allows stimulation with a negligible level of seismicity. In this paper we analyse the performance of two tensile hydraulic stimulation strategies, for geothermal systems at large depth. In a reference case with reservoir temperature of 190C at 5 km depth, tensile fracturing can result in significant flow rates when multiple fractures are generated in a low permeable formation. LCOE range from 15 to 27 cts/kWh depending on subsurface conditions and costs for hydraulic stimulation. The economics of the case can be significantly enhanced by developing these subsurface engineering scenarios in higher subsurface temperature environments.
-
-
-
Geothermal Simulation Applied to the Optimization of Underground Energy Storage Systems
Authors A. Yapparova, J.E. Mindel, M. Maierhofer and S.K. MatthäiTo optimize the design and to model the working cycle of an underground thermal energy storage facility (UTES) a geothermal reservoir simulator was created on the basis of the Complex Systems Modelling Platform C++ (CSMP++) software library (Matthhäi, et al., 2001) following two different approaches: a Boussinesq approximation and a full Pressure-Temperature-Enthalpy scheme (based on Coumou et.al. 2009). A series of benchmark tests were performed to assess efficiency and accuracy of both schemes, given the standard operating temperature ranges. The simulator is then used to determine optimal well locations and operating schedules for a UTES construction project.
-
-
-
Fluid Flow Behavior of a Faulted Reservoir - Development of Hydraulic Models of Fault Zones
Authors M. Loubaud, S. Gentier, X. Rachez and J. RissFlow and transport modeling of a deep faulted geothermal reservoir is necessary to optimize the heat exploitation. To build these models, a good understanding of the fluid flow in the faults is an important issue. To improve the knowledge of the main flow paths in a geothermal system like the one of Soultz-Sous-Forêts, we propose an approach based on the development of a hydraulic model of fault zones. The flow model is based on the identification of hydraulically efficient segments along the fault zone which are associated conceptual model. The integration of geological and structural data leads to the construction of a numerical model based on a DFN approach. It allows the evaluation of an equivalent permeability. It is a first step towards a more global reservoir model where the fault zone is assimilated to a single disk. Indeed, defining more precisely the main hydraulic and transport properties of fault zones should permit to be more consistent with the tectonic and structural history of the reservoir and thus the improvement of the reservoir modeling.
-
-
-
Double-difference Tomography for Geothermal Reservoir Characterisation - A Case Study at Paralana, South Australia
Authors J. Albaric, M. Calò, S. Husen, V. Oye, V. Maupin and M. HastingWe performed a series of tests for passive seismic tomography with data from Paralana, a new Enhanced Geothermal System (EGS) located in South Australia. An injection well was drilled at Paralana in 2009 into a sedimentary basin down to a high heat-producing basement at ~4000 m depth. The first main hydraulic stimulation of the well took place in July 2011 in order to create/enhance a geothermal reservoir. Induced seismicity was monitored by a network of 20 stations (from surface to 1800 m depth) and more than 7000 microearthquakes were detected during the five days of injection. The synthetic tests indicate that small velocity heterogeneities into the reservoir can be resolved at Paralana if high-precision relative arrival times are used, such as provided by waveform-cross correlation. Preliminary results indicate a low P-wave velocity anomaly at the base of the well.
-
-
-
Monitoring of Underground Gas Storage Sites by Elastic 2D Time-lapse Waveform Inversion
Authors D. Köhn, S.A. Al Hagrey and W. RabbelMitigation of anthropogenic green house gas GHG, including CO2 emissions in the atmosphere demand developments of renewable energy resources. However, most renewable energy sources are fluctuating and therefore need energy storage to match power supply and demand. One possible solution is energy geostorage by injecting compressed air in sealed underground structures. After a short introduction to the theory of time-lapse waveform inversion, the theoretical resolution of the isotropic elastic material parameters, as well as the density, will be demonstrated by a synthetic injection scenario using the Marmousi-II model as complex geological background model. Another, more realistic example is based on accurate simulations of the gas migration within a geological simple background model and the use of poroelastic equations to derive suitable effective media parameters.
-
-
-
Feasibility Study of Applying Geoelectric and Gravity Techniques for CAES Reservoir Monitoring
Authors S.A. Al Hagrey, D. Köhn and W. RabbelMitigations of anthropogenic GHG demand developments of renewable energy resources. These energy resources are intermittent and need buffer storage to bridge the time-gap between production and demand peaks. North German Basin has a very large capacity for CAES in porous saltwater aquifers and salt cavities (natural and artificial). Replacement of brine by compressed gas in saline formations cause strong changes in electrical resistivity and density, and therefore justify the application of geoelectrics, electromagnetics and gravity etc. In this study we study the applicability of these geophysical techniques in mapping CAES reservoirs (pore and cavern) in the underground of NW Germany. Our constrained techniques of electric resistivity tomography in boreholes are able to highly resolve the unusual problem of super resistive air caverns within the extreme resistive salt rocks. For gravity techniques, we could determine the lowest detectable mass deficit and offset of double caverns (2-fold their depth) in the underground resulting from pore and salt cavern CAES at some study sites.
-
-
-
Sustainable Management of our Basin Contained Crustal Services - An Australian Perspective
Authors T.J. Rawling and M. SandifordWith the advent of a number of new geo-energy technologies such as geothermal coal seam gas, shale gas and tight gas as well as geological storage of water, fuel and waste the demands on the shallow crust are becoming extreme, especially in our sedimentary basins. As a result the likelihood of resource conflict increases along with the potential for sterilization of potential future uses of portions of a basin due to poor planning (ie geothermal reservoirs used to store CO2). In this presentation we will present the current state of play with regard to Sustainable Sedimentary Basin Management in Australia and discuss a number of new research programs that are installing monitoring systems to assess the impact of developments in the shallow crust. We will also discuss the associated research being conducted into the modelling complex basin systems and the new integrated management workflows that are being developed to help scientists and policy makers sustainably manage these crustal services into the future.
-
-
-
-
-
European Resource Assessment for Geothermal Energy and CO2 Storage
Authors J.D. van Wees and F. NeeleGeothermal Energy and CO2 Capture and Storage (CCS) are both considered major contributors to the global energy transition. Their success critically depends on subsurface resource quality, which in turn depends on specific subsurface parameters. For CCS and Geothermal Energy these in some respect overlap and others differ. Here, an overview is presented of recent advancements in the assessment of subsurface quality criteria, and their implications for the assessment of CCS and geothermal energy potential in Europe. In this assessment we focus on deep sedimentary aquifer systems. In particular for these resources strong synergies exist between CSS, oil and gas and geothermal energy. In extension to these resources, we also present the latest insights in resource potential estimates for engineered geothermal systems (EGS)
-
-
-
New Challenges in Geomechanics - From the Enhanced Geothermal System towards the CO2 Underground Storage
By S.S. GentierDuring the three last decades, geomechanics has been, in a large part, driven by the evolution in the domain of energy. After its contribution in the conventional oil and gas resources and in the nuclear waste repository, new domains such unconventional geothermal energy and CO2 underground storage have stepped in since around 10 years and more recently, unconventional gas and oil resources continue to contribute to the evolution of geomechanics. In this paper, we have focused on the Enhanced Geothermal Systems and on the CO2 underground storage, highlighting the new challenges for each of these two domains and the common ones: geomechanical role of the faults, stress fields and behavior of the near well.
-
-
-
Systematic Risk Reduction for Induced Seismicity - Understanding Underlying Common Processes
Authors F.R. Schilling, M.M. Beck and B.I.R. MüllerIf risk is defined as hazard multiplied by the costs of damage, the vulnerability, e.g. of health, safety, and environment (HSE), in conjunction to possible hazards become important for the quantification of local and regional risks. Within this overview different risk reduction approaches such as - online monitoring in combination with a red light system, - transfer of knowledge from “similar sites“ to a new site, and - geomechanical models are discussed and compared. An independent validation of the different concepts will be used to develop a systematic risk reduction. Based on petrophysical concepts a risk reduction approach will be presented which includes a knowledge based side qualification strategy, the possibilities of a reservoir pressure control and suitable monitoring concepts.
-
-
-
Recent Advances in Satellite Monitoring of Injection and Withdrawal Projects - The Role of InSAR
Authors A. Ferretti, A. Rucci, A. Tamburini and F. RoccaReservoir monitoring improves our understanding of reservoir behavior and helps achieve more effective reservoir management and prediction of future performance with obvious economic benefits. Volumetric changes in reservoirs due to fluid extraction and injection can induce either subsidence or uplift which can trigger fault reactivation and threaten well integrity (as well as reservoir structural integrity). Depending on the depth of the reservoir and the characteristic of the cap rock, deformation may also be detectable at the surface. Surface deformation monitoring can provide valuable constraints on the dynamic behavior of a reservoir enabling the evaluation of volumetric changes in the reservoir through time, allowing the calibration of geo-mechanical models. Whatever the surveying technique, the detection of millimeter level surface deformation is required to monitor small surface displacement rates, which could impact risk evaluation and environmental impact assessment in oil&gas operations, as well as in geothermal plants.
-
-
-
The Injection of Liquid Cool CO2 in a Warm Depleted Gas Reservoir
Authors C. Hofstee, J.H. Maas and D. LoeveThe P18-4 compartment (operated by TAQA Energy B.V.) would be injected by CO2 at a minimum temperature of 12 degrees C. At these temperatures, the CO2 phase will either be a gas or a liquid. As the initial temperature of the reservoir is 120 oC, the CO2 will eventually be the gaseous or (at higher pressures), the supercritical phase. An outstanding issue was the simulation of the fate and transport of the injected liquid CO2, with emphasis on the temperature effects. In this presentation, we will present results of our latest research efforts
-
-
-
Could this be the Future of Secure CO2 Storage?
Authors S.M. Shariatipour, E.J. Mackay and G.E. PickupCarbon capture and storage has been of interest to many researchers to mitigate the anthropogenic emission of Carbon Dioxide in recent years. Projects to store supercritical CO2 in aquifers have been developed. However, there is a great uncertainty about the leakage of CO2 out of the storage formation under buoyancy. Shariatipour et al 2012 presented the CO2/brine down-hole mixing method (DHM) which could improve the security of CO2 sequestration in geological formations. In this aforementioned method water is extracted near the top of the aquifer, CO2 is mixed with water in the intermediate section of this well, and then the water with dissolved CO2 is injected at the bottom of the formation. It was concluded that this method could be an engineering solution to tackle the leakage risk of free phase CO2 through the caprock. In this study the application of down-hole mixing in a real field model (Lincolnshire – Smith et al 2012) is examined. Calculations are performed to identify the optimum level of water extraction and injection of dissolved CO2 in brine. In addition, simulations will be presented to show the other advantages of using DHM on CO2 storage (e.g. CO2 injection for much longer period).
-
-
-
CO2-induced Rock Alteration in Armenia and Georgia - First Results of BS-ERA.NET Project CauCasCCS
Authors S. Klumbach, O. Körting, H. Babayan, G. Melikadze, B. Müller, T. Neumann, H. Stosch and P. TozalakyanThe project CauCasCCS is concerned with fundamental research on geological CO2 capture and storage. The study aims to investigate the possible alteration of rocks exposed to natural CO2-spring water. Such rocks represent natural analogues for reservoir cap rocks and storage.
-
-
-
Sustainable Geothermal Energy Roadmap for Future in New EU Member Countries - The Status in Latvia
Authors J. Burlakovs, A. Miemis and O. StiebrinsThe objective of the new plan “Initiative for Strategic Geothermal Roadmap Development in New EU Member Countries” is to contribute the secure, sustainable and competitively priced energy for Europe from geothermal sources. Main tasks are - to promote the development of new geothermal energy use site clusters in Europe, implement knowledge for new best available technologies for the use of geothermal energy for heating, cooling and electricity production thus supporting energy diversification in new EU member countries, to take away legislative barriers and stimulate research and production of geothermal energy in new EU member countries based on knowledge of experienced partners, to promote energy efficiency during its transport to district heating (cooling) and gridlines in new developed clusters and reduce CO2 emissions in the frame of the EU Energy 2020 Strategy and Directive on the promotion of the use of energy from renewable sources. Latvia does not have huge energetic resources therefore geothermal resources and possible use of those are of great interest. Geothermal groundwater from Cambrian horizon can be used for district heating and cooling systems and if modern technologies applied, electricity production to grid is possible.
-
-
-
High-resolution Fracture Characterization of a Siliciclastic Aquifer Targeted for CO2 Sequestration, Svalbard, Norway
Authors K. Ogata, K. Senger, A. Braathen, S. Olaussen and J. TverangerThe target siliciclastic aquifer investigated by the Longyearbyen CO2 Lab as a possible test-scale CO2 storage unit is a dual-permeability reservoir characterized by fractured, tight lithologies. By integrating borehole and outcrop data, the reservoir section has been subdivided in intervals defined by 5 litho-structural units (LSUs), each one characterized by different lithologies and fracture sets interpreted to represent pseudo-geomechanical units. Due to their contrasting features, these LSUs are believed to have a crucial influence on subsurface fluid migration. Our results indicate that fractured shale intervals control lateral fluid flow (predominance of low-angle fracture) whereas sandy and coarser intervals seem to control vertical fluid flow (predominance of high-angle fractures), locally enhancing the contribution of the matrix porosity. Horizontal and vertical high permeability conduits can be found at the LSUs’ interfaces, along the chilled margins of igneous sills and dykes, and along the damage zone of mesoscopic faults, due to the localized enhanced fracturing (fracture corridors). A large database containing structural data on fractures has been acquired and analyzed in order to extrapolate calibrated parameters for numerical modeling and flow simulations. These in turn allow reservoir volumetric calculations, assessment of seal integrity and forecasting of vertical/lateral connectivity of the reservoir.
-
-
-
Mapping of CO2 Storage Achievements Across Europe
Authors V. Hladik, H. Rütters, F. May, A. Shogenova, R. Martinez, I. Czernichowski and B. Safticof relevant national legislation. The activities in individual countries were assessed in a semi-quantitative way, which resulted in division of the countries into four groups according to each country’s overall state of CO2 storage achievements. Finally, the CO2 storage achievement scores of individual countries were compared with their annual CO2 emissions. The results clearly illustrate the existing activity and knowledge gap between the “forerunner” and “follower” countries, which needs to be closed if the expected significant contribution of the CCS technology to the decarbonisation of the European economy in the next few decades is to be achieved.
-
-
-
Geochemical Monitoring of Dissolved CO2 in Shallow Aquifer at the Rousse Test Site for CO2 Geological Storage
Authors Y.S. Staniszewski, A.G. Groleau, D.J. Jezequel and P.A. AgrinierWe consider a shallow aquifer as an integrative system of putative deep CO2 leaks above a CO2 geological sequestration test site. This would help to built sensitive and reduce cost monitoring of near surface CO2 induced perturbations. To study this potentiality, we have monitored the dissolved carbon dynamic (dissolved CO2 species) and main chemical parameters in the aquifer waters of Jurançon Hills (Near Pau, France). Over three years, we have collected a set of data (conductivity, geochemistry, isotopes) at four springs. We are able to able to interpret the dynamics of the dissolved CO2 by a variety of natural forcings (biological, hydrodynamics, water-rock interactions, … which are mainly related to the climatic forcing). This study and geochemical modeling allow us to build proxies that must very sentitive to non-natural inputs of CO2.
-
-
-
Physical & Chemical Properties of Rocks and Well Cement for CO2 Storage Applications in a Full Scale Borehole Simulator
Authors J. Mühlbach, S. Klumbach, A. Hirsch and M. KromerWell integrity is crucial for the security of CO2 storage in geological formations. Therefore, petrophysical, geochemical and mineralogical properties of sedimentary rocks and well cement are analysed. These properties are required to characterize and evaluate geological reservoir structures and well installations. The goal of the experiment COBRA is to test different concepts in full scale experiments to evaluate potential leakage pathways around well facilities and finally predict integrity. Injection related modifications of rock and cement properties might have significant influence on the long-term integrity of reservoirs. In this context, a database of physical and chemical results of the small scale experiment of rocks and well cements is presented.
-
-
-
3D Static Models as a Tool to Indicate Prospective Geological Structures for EGS in Sedimentary Rocks of Central Poland
Authors B. Papiernik, A. Sowiżdżał and G. MachowskiThe paper illustrates the results of 3D static modeling in sedimentary cover of the Polish lowlands and their suitability for characterizing Enhanced Geothermal System. The resultant basic structural framework of the EGS systems model covers an area of ca. 36000 km2. It is composed of 13 structural horizons, starting from the base of the Carboniferous strata up to the top of the Cretaceous succession, and contains 12 stratigraphic zones being equivalents of stratigraphic epochs. The results of structural and parametric modeling were finally presented as maps of average parameters and effective thicknesses, superimposed on maps of temperatures related to the tops of the mapped zones. Superposition of depth, thermal and reservoir criteria allow to indicate spatial extent of hypothetically favorable conditions for EGS/HDR development. The results of static modeling indicate that relatively favourable conditions for EGS systems development can be expected locally of Upper Rotliegend and Carboniferous reservoir. The most important problem referring to practically the whole area of interest is lack of good quality data.
-
-
-
Past, Present and Future Passive Seismic Tasks for Sustainable Development
By K.S. TkhakSeismic hazard increases every year as economic assimilation of earthquake-prone areas is going on. It is also aggravated by uncontrolled human impact on the Earth’s lithospheric shell (extraction of oil and gas, as well as of other mineral resources, construction of large hydro technical structures, burial of industrial waste and so on). Higher seismic risk is also caused by setting up atomic power plants and other ecologically hazardous facilities in earthquake-prone regions, because even insignificant earthquakes and the associated secondary damaging factors (landslides, rock falls, ground breakage and so on) can disrupt their normal operation. The problem of providing seismic safety is thus a complex one, demanding interdepartmental solutions and coordination, the estimation and forecast of, not only direct, but also of consequential loss implementation of a great number of multi-level tasks using passive seismic methods.
-
-
-
The CO2 Storage Atlas, Norwegian Sea, with Simulation Case Study Nordland Ridge
More LessStudies have shown that it may be possible to store large amounts of CO2 on the Norwegian continental shelf. A team in Norwegian Petroleum Directorate (NPD) has, during the last two years, interpreted relevant data on the Norwegian Continental shelf in order to classify potential storage sites. A Simulation model of the The Nordland ridge Åre formation was built for the purpose of assessing its CO2 storage potential. The modeled Nordland Ridge is a closed structure with CO2 storage potentials in two dome like structural highs. The main simulation cases inject 2 mill Sm3 CO2/day (daily rate of 1/5000 of total volume). The simulated injection period last 50 years, and simulation then continues for 1 000 years to check the long term CO2 migration effects.
-
-
-
Advances in the Assessment of the Deep Geothermal Reservoirs of Hainaut, Belgium
Authors N. Dupont, O. Kaufmann, L. Licour, A. Rorive and J.M. BaeleIn the urbanised area of Mons-Borinage (Hainaut, SW Belgium), deep geothermal potential is known since the late seventies. Since 1986, the resource is exploited by two wells. Current projects aim at developing this resource near Mons city for heat production, but also using a suspected deeper reservoir for electricity production. The development of deep geothermal projects in Hainaut requires a better knowledge of the structure of the reservoirs. For this purpose, a new geophysical survey (2D reflection seismic lines) was conducted in 2012, and data from old surveys were reprocessed. Distinctive discontinuities were expected, according with the regional tectonic framework. Based on our interpretation of the final seismic sections, main geological horizons were picked (in TWT) and integrated in a 3D geological model.
-
-
-
An Interdisciplinary Approach for Medium-small Size Geothermal Plants Design - A Thermoeconomic Assessment
By M. VaccaroThe sustainability of a geothermal project also deals with economic issues. The feasibility assessment should take into account not only economic, but also thermoeconomic issues, depending on the type of plant. The application of thermoeconomic approach in geothermal energy utilization would lead to the elaboration of production scenarios (power output and extraction rate). This aspect is strictly connected with the possibility of technologic standardization of (for example) ORC geothermal plants. The evaluation of the specific cost of the energy production is not a trivial task, particularly for medium-low temperature resources. An evaluation of the cost items of a plant is presented and the impact of the specific (natural and economic) context is treated. National/Local energy policies, electric grid and market planning are important external factors to determine the specific energy price. Some case studies are analyzed and their technical-economic performances are discussed and compared, through a thermoeconomic assessment. The development of binary cycle geothermal plants market (particularly in Italy) is linked to these issues and discussed under this perspective. The task is to elaborate a methodological interdisciplinary approach (here outlined) for the design decision making processes, being valid only in case of medium-low temperature geothermal resources.
-
-
-
Geothermal Exploration in the Palana Area, Kamchatka Peninsula, Using MT-AMT Soundings
Authors K.M. Antashchuk, A.K. Saraev and S.V. KandinskayaResults magnetotelluric-audiomagnetotelluric (MT-AMT) soundings for geothermal exploration in the north-western part of the Kamchatka Peninsula are considered. The works aimed at the revealing of rather low depth (up to 2 km) and low and middle temperature (up to 150 o C) geothermal sources have been carried out in two stages: preliminary and detailed. At the preliminary stage on MT-AMT soundings data the prospects of several beforehand selected sites have been estimated. At the detailed stage on investigations of the most perspective site its 2D structure has been reliably determined and using the 2D inversion geoelectric sections up to the depth of 3 km have been derived. On the soundings results the supplementary investigations of an allocated deep anomaly and the subsequent checking by drilling have been recommended.
-
-
-
The Use of Artificial Heat Fields Diagnostic Wells Underground Gas Storages
Authors R.F. Sharafutdinov, R.A. Valiullin and A. RamazanovThus, summing up theoretical, experimental and oilfield investigations by active temperature logging one can make a conclusion that the active temperature logging is productive when solving the following problems: • Estimation of the intervals of liquid movement behind the casing. To solve this problem it is necessary to carry out inductive heating of the casing above the top of the bed (for behind-the casing flow “over”) or below the bottom of the bed (for behind-the –casing flow “below”) with the inflow stimulation and analyze the thermal mark movement. • Estimation of small rates. Based on the analysis of the thermal mark movement inside the casing
-
-
-
Experimental Study of CO2 Injection with SO2 Impurities in Depleted Gas Fields in Northeast Netherlands
Authors P. Bolourinejad and R. HerberThe aim of this experimental study is to evaluate the effects of impure CO2 injection on potential storage sites in northeast Netherlands. The reservoir in these fields is Permian Rotliegend sandstone, overlain by Zechstein carbonates, anhydrites and salt. Medium-term (30 days) laboratory experiments have been carried out by injection of CO2 and 100 ppm SO2 in reservoir/seal core samples. Following injection and subsequent formation of sulfuric acid, dissolution of feldspar and dolomite minerals was observed. Most of the SO2 was immobilized and trapped by anhydrite precipitation. Permeability measurements of the samples before and after the experiment showed that permeability in reservoir samples increases by factors between 1.2 and 2.2. In the caprocks, the samples with higher percentage of carbonate minerals show increase in permeability but higher anhydrite content of samples causes permeability reduction.
-
-
-
A Methodology for Geological Hazard Assessment in Temporary Storage Facilities
Authors F.L. Guido, V. Picotti and M. AntonelliniThe main risks and hazards related to fluid storage in subsurface are associated with reservoir rocks deformation, pore pressure change and/or change in stress around faults (depending on their properties and orientations): a change in pore pressure due to injection or extraction of fluid from a well, may change the stress acting on a nearby fault; this change in stress may induce slip or movement along that fault creating a seismic event. Compaction or dilation of reservoir volume induce stress changes inside the reservoir and the surrounding caprock, also generating ground movements: subsidence and uplift,, in consequences of fluid withdrawing or fluid injection in reservoir, are related to reservoir performances, geological setting and reservoir/caprock mechanical properties. Despite an increased understanding of the basic causes of their hazards, these kinds of energy projects will retain a certain level of risk for inducing seismic events, manufacture integrity, and ground movements. For assessing geological hazards associated to subsurface temporary storage, we develop a 3-step, quite fast and easy procedure; starting from a real reservoir, converted to temporary storage facility, we quantify 1) reservoir deformations, 2) induced stress changes and 3) areas in the caprock which are more affected by stress changes distribution.
-
-
-
Geothermal Potential of the Eastern Part of the Polish Carpathians in the Light of Computer Modelling
Authors G. Machowski, B. Papiernik, M. Hajto and W. GoreckiThe paper presents results of modelling of petrophysical-volumetric, hydrogeological and thermal parameters which enabled assessment of geothermal energy resources accumulated in rocks and waters in the area of the eastern part of the Polish Carpathians and indication of zones prospective for utilization of the resources for heating purposes, balneotherapy and/or recreation. The assessment of geothermal energy resources was carried out for the following twelve groundwater aquifers: flysch (Skole, Silesian, and Dukla-Magura), Miocene, Upper Cretaceous (without Cenomanian), Cenomanian-Lower Cretaceous, Upper Jurassic, Middle Jurassic, Middle Triassic, Lower Triassic, Carboniferous (clastic), and Devonian-Carboniferous (carbonate). Analysis of the modelling results shows relatively poor reservoir parameters of the flysch rocks in the study area; it especially refers to permeability that for potential reservoir horizons amounts, on the average, to a few mD. In the basement of the Carpathians, locally very good reservoir and hydrothermal potentials are characteristic of the thick Miocene complex, particularly beneath the Carpathian overthrust.
-
-
-
Numerical Model of a Geothermal Project in the Northern Upper Rhine Valley
More LessThe subsurface of the northern upper Rhine valley is a potential geothermal reservoir. Interpretation of 2D and 3D seismic data, supplemented by well data is the base for a static 3D model. Further integration of lithologic information from outcrop studies and well cores leads to a facies distibution of the study area. Transfer of stratigraphic and structural data to a finite element program allows the simulation of hydraulic and thermal developement while 25 years of production. Especially the production in a fault zone with a high throw and good permeability predicts very good usability of the geothermal reservoir units.
-
-
-
Computational Investigation of Hydro-mechanical Effects on Transmissivity During Initial Injection at Desert Peak (Nv)
By S. BenatoA low flow rate, low pressure shear-stimulation injection phase of an Engineered Geothermal System (EGS) experiment at Desert Peak produced improved injection rate under constant wellhead conditions consistent with hydraulically-induced mechanical shear failure (Modes II and III) within the rock mass. The observed pressure response is computationally simulated and utilized for calibration of a numerical solution. The present study offers a new perspective on the complex hydro-mechanical interactions between injected fluid, the existing natural fracture/fault network and the stress field. We use statistical fracture analysis and hydro-mechanical modeling to define and demonstrate a conceptual framework for the Desert Peak EGS experiment. Discrete network simulations, based on site-specific fracture attributes, are used to derive equivalent permeability tensors of the background fracture networks for comparison with preferred fluid migration directions observed in both hydraulic and tracer tests. FLAC3D, a hydro-mechanical simulator, is used to investigate changes in stress and displacement according to a Mohr-Coulomb frictional model subjected to perturbations in pore pressure. Conditions for shear failure due to pressure and stress field alterations exist in areas of the model consistent with the location of micro-seismicity monitored during the EGS experiment.
-
-
-
Outcrop-based Reservoir Modeling of a Naturally Fractured Siliciclastic CO2 Sequestration Site, Svalbard, Arctic Norway
Authors K. Ogata, K. Senger, J. Tveranger, A. Braathen and S. OlaussenWe present a geological model of an unconventional siliciclastic reservoir projected for CO2 sequestration near Longyearbyen, Svalbard. The reservoir is characterized by a substantial sub-hydrostatic pressure regime, very low matrix porosity and –permeability values, extensive natural fracturing and the presence of igneous dykes and sills. Due to the poor reservoir properties of the matrix, flow in the reservoir is largely governed by fracture properties. Input data to the model includes four boreholes, partly or completely penetrating the reservoir section, offshore and onshore 2D seismic profiles and structural and sedimentological data collected from nearby outcrops of the target formation. Combined, these datasets provide firm modeling constraints with respect to the regional geometry, sedimentology and fracture patterns. Previous work has shown that the observed fractures can be grouped into five distinct litho-structural units (LSUs), each exhibiting a characteristic set of properties (fracture density, orientation etc.). The spatial distribution of these LSUs is incorporated into the model. Initial first-order water injection tests using a commercial streamline simulator validate the applicability of this model for further fluid injection tests, including the long-term monitoring of injected CO2.
-
-
-
Influence of Chemical Degradation on Shear Behaviour of a Rock Joint - Application to CO2 Geological Storage
Authors O. Nouailletas, C. Perlot, C. La Borderie and G. BallivyCO2 sequestration in deep geological formation is one way to reduce the greenhouse gas emissions causing global warming. Possible geological fault reactivation is an important aspect of site durability and must be considered. This phenomena stems from modifications of fault balance, such as new effective stress or chemical deterioration of fault roughness. This last situation defines the thematic developed in this work: analysis of the fault roughness modifications induced by a chemical degradation and their consequences on mechanic stability. The present study shows the evolution of the shear behaviour of an existing crack in Campanian Flysch specimens with chemical degradation. For that purpose, crack surfaces were immersed in an acidic solution ([HCl] = 0.6 mol.l-1) at a constant pH during 6 hours. A first analysis focused on the evolution of roughness parameters and material loss induced by chemical attack. Once degradation was characterized, direct shear tests on sound and chemically degraded samples were performed in the University of Sherbrooke (Québec, Canada). Classical curves of direct shear test (shear stress vs. Tangential displacement and dilatancy) of damaged samples show an important modification of the shear behavior : degraded joints have no shear stress peak and its contractance are more important.
-
-
-
Exergy Analysis of Coupled CO2 Sequestration with Geothermal Energy Production
By H. WoodrowThe case analysed in this study is the direct injection of captured CO2 into aquifer water that has been pumped to the surface by the geothermal plant, thereby being stored in solution. An exergy analysis of the process as a whole, utilising recently produced data on the exergy inputs and outputs of coupled CCS and geothermal technology. The system has been divided into core systems each characterised in a MATLAB exergy model, comprising of two parts, i) a case study model taking previous exergy studies of power plants and geothermal plants and integrating them allowing for validation of the model based on current systems; ii) is a theoretical model allowing for a continuous analysis of each component, this is based on utilising emission factors of power plants and then looking at identifying the optimum geothermal plant size for the dissolution of the associated CO2. The construction of the models has further looked to develop on the current state of exergy analysis by increasing the level of physics by departing from utilising ideal gas states to an improved equation of state better able to capture the fluid properties in particular of Carbon dioxide.
-
-
-
Modelling and Numerical Simulation of Two-phase Multi-components Flow with Reactive Transport in Porous Media - Application to Geological Storage of Carbon Dioxide
Authors E. Ahusborde, B. Amaziane, M. Kern and V. VostrikovModelling and numerical simulation of two-phase multi-components flow with reactive transport in porous media: application to geological storage of carbon dioxide.
-
-
-
Surface and Near Surface Geochemical Surveying of a CO2 Injection Pilot: application study to the French Pyrenean Foreland (Rousse CCS Pilot)
Authors F.G. Gal, Z. Pokryszka, S. Lafortune and K. MichelThe geochemical monitoring of the Rousse injection pilot, operated by TOTAL Exploration Pproduction France, is presented over a 5- years long time period. The monitoring consisted in the acquisition at regular frequency of soil gas concentrations and fluxes at selected sampling points, coupled with the study of the geochemical parameters evolution of a perched aquifer overlying the storage reservoir through a dedicated 85 m depth borehole. Baseline data were acquired between September 2008 and December 2009 then the monitoring shifted to the surveying of the pilot during the operating phase. This second phase ended in March 2013. Data acquired during these two phases are presented and discussed.
-
-
-
Experimental and Modeling Investigations of Some Thermophysical Properties of CO2 Rich Mixtures
Authors V. Lachet, B. Creton, A. Di Lella, D. Le Roux, P. Mougin, C. Prinet and P. Duchet-SuchauxIn CCS operations, the CO2 stream captured from industrial installations using oxycombustion process is not a pure CO2: it contains some associated compounds. This mixture of gases may have significantly different thermo-physical properties as compared to pure CO2. For a global account of these impacts and for a precise specification of maximal amounts of associated compounds that can be tolerated in CO2 flues, further investigations are strongly required. Obtaining accurate knowledge of the thermodynamic behaviour of CO2-associated gases mixtures is part of the studies that are necessary to develop optimized CCS processes. In the present study, the thermodynamic behaviour and transport properties of some CO2 rich mixtures have been investigated using different complementary approaches: experimental measurements, molecular simulation and equation of state modelling. We have first investigated some simple binary mixtures, and then focused on the study of the CO2 flue injected in the Rousse CO2 storage pilot conducted by TOTAL SA. In this pilot, CO2 is produced by oxycombustion from natural gas transformed into fuel gas at the Lacq plant, and transported in a pipeline 30 km away to the depleted gas reservoir of Rousse. This CO2 stream is a quaternary mixture composed of CO2, O2, N2 and Ar.
-
-
-
A Summary of the Research Conducted at Uppa in Relation to the Rousse CO2 Storage Project
Authors D. Broseta, O. Nouailletas, C. Perlot, C. La Borderie, C. Langlais, F. Contamine and P. CezacThe Rousse CO2 storage project has consisted in injecting over a 3-year period (from 2010 to 2013) about 50 000 tons of CO2 into a depleted gas field located near the city of Pau. This project has been a unique opportunity to investigate various scientific and technological issues related to CO2 storage, with scopes/applicabilities exceeding those of this particular projet. University of Pau & Pays de l'Adour has been involved in these investigations along with other academic or research institutions including BRGM, IFPEN, IPGP and University of Nancy. The topics examined by UPPA are seal and fault response to CO2. The methodologies devised and implemented for assessing top seal integrity and the evolution of rock joint roughness and shear behaviour in presence of CO2 have made use of samples from the overburden of the Rousse reservoir.
-
-
-
A Geochemical Approach for Monitoring a CO2 Pilot Site - Rousse, France
By B. GarciaThe main objective of this paper is to present geochemical monitoring results of gas characterization combined with CO2-carbon isotopes and noble gas analyses. This R&D work marks a novel approach to the CO2 monitoring strategy envisaged in a CCS project. The results obtained and presented here comes from R&D project between IFPEN and TOTAL SA company and also from Sentinelle ANR project. This methodology and results obtained attempt to better understand the dynamic between the gas field, the aquifer, the surface and the atmosphere, in order to detect any eventual leakage of the injected CO2 from the reservoir to the near surface.
-
-
-
Six Years of Intensive Research Cooperation to the Lacq-Rousse Pilot of Total - The Academic Point of View from GeoRessources Lab
Authors J. Pironon, P. de Donato, J. Sterpenich and P. FaureThis paper presents the feedback of 6 years of research programs led by GeoRessources lab of Université de Lorraine about geochemistry of the Rousse pilot of Total. Intense cooperation between academic labs, EPIC, very small companies, industry, government organizations supported three main research programs covering a wide vertical scale from planetary boundary layer to deep reservoir rock (around 6 km). Main innovative results concern the development of new remote sensors and new completion/sensors combinations for in situ on-line gas measurements. Major research advances show very high natural variations of CO2 with time and soil location, allow the establishment of prediction law for the evolution with time of CO2 content in soil, contribute to geological and geochemical models for reservoir and caprock and describe the mechanisms of oxidation of CH4 and mineralogical assemblages of Rousse reservoir. In the biosphere/atmosphere interface, experimental 3D simulation of natural CO2 envelopes directly above the injection site of Rousse has been developed for the first time. The implication of GeoRessources lab to the Lacq-Rousse pilot research program of Total has produced numerous new geochemical and technical concepts. Such results are transferred to other applications in different domains: security of industrial sites, environment control, and geodynamics of the Pyrenees.
-