- Home
- A-Z Publications
- Basin Research
- Previous Issues
- Volume 18, Issue 4, 2006
Basin Research - Volume 18, Issue 4, 2006
Volume 18, Issue 4, 2006
-
-
Tectonic evolution of the Himalaya constrained by detrital 40Ar–39Ar, Sm–Nd and petrographic data from the Siwalik foreland basin succession, SW Nepal
Authors A. G. Szulc, Y. Najman, H. D. Sinclair, M. Pringle, M. Bickle, H. Chapman, E. Garzanti, S. Andò, P. Huyghe, J‐L. Mugnier, T. Ojha and P. DeCellesABSTRACT40Ar–39Ar dating of detrital white micas, petrography and heavy mineral analysis and whole‐rock geochemistry has been applied to three time‐equivalent sections through the Siwalik Group molasse in SW Nepal [Tinau Khola section (12–6 Ma), Surai Khola section (12–1 Ma) and Karnali section (16–5 Ma)]. 40Ar–39Ar ages from 1415 single detrital white micas show a peak of ages between 20 and 15 Ma for all the three sections, corresponding to the period of most extensive exhumation of the Greater Himalaya. Lag times of less than 5 Myr persist until 10 Ma, indicating Greater Himalayan exhumation rates of up to 2.6 mm year−1, using one‐dimensional thermal modelling. There are few micas younger than 12 Ma, no lag times of less than 6 Myr after 10 Ma and whole‐rock geochemistry and petrography show a significant provenance change at 12 Ma indicating erosion from the Lesser Himalaya at this time. These changes suggest a switch in the dynamics of the orogen that took place during the 12–10 Ma period whereby most strain began to be accommodated by structures within the Lesser Himalaya as opposed to the Greater Himalaya. Consistent data from all three Siwalik sections suggest a lateral continuity in tectonic evolution for the central Himalayas.
-
-
-
Miocene to Recent exhumation of the central Himalaya determined from combined detrital zircon fission‐track and U/Pb analysis of Siwalik sediments, western Nepal
ABSTRACTFission‐track (FT) analysis of detrital zircon from synorogenic sediment is a well‐established tool to examine the cooling and exhumation history of convergent mountain belts, but has so far not been used to determine the long‐term evolution of the central Himalaya. This study presents FT analysis of detrital zircon from 22 sandstone and modern sediment samples that were collected along three stratigraphic sections within the Miocene to Pliocene Siwalik Group, and from modern rivers, in western and central Nepal. The results provide evidence for widespread cooling in the Nepalese Himalaya at about 16.0±1.4 Ma, and continuous exhumation at a rate of about 1.4±0.2 km Myr−1 thereafter. The ∼16 Ma cooling is likely related to a combination of tectonic and erosional activity, including movement on the Main Central thrust and Southern Tibetan Detachment system, as well as emplacement of the Ramgarh thrust on Lesser Himalayan sedimentary and meta‐sedimentary units. The continuous exhumation signal following the ∼16 Ma cooling event is seen in connection with ongoing tectonic uplift, river incision and erosion of lower Lesser Himalayan rocks exposed below the MCT and Higher Himalayan rocks in the hanging wall of the MCT, controlled by orographic precipitation and crustal extrusion. Provenance analysis, to distinguish between Higher Himalayan and Lesser Himalayan zircon sources, is based on double dating of individual zircons with the FT and U/Pb methods. Zircons with pre‐Himalayan FT cooling ages may be derived from either nonmetamorphic parts of the Tethyan sedimentary succession or Higher Himalayan protolith that formerly covered the Dadeldhura and Ramgarh thrust sheets, but that have been removed by erosion. Both the Higher and Lesser Himalaya appear to be sources for the zircons that record either ∼16 Ma cooling or the continuous exhumation afterwards.
-
-
-
Late Miocene – Recent exhumation of the central Himalaya and recycling in the foreland basin assessed by apatite fission‐track thermochronology of Siwalik sediments, Nepal
ABSTRACTThermochronological analysis of detrital sediments derived from the erosion of mountain belts and contained in the sedimentary basins surrounding them allows reconstructing the long‐term exhumation history of the sediment source areas. The effective closure temperature of the thermochronological system analysed determines the spatial and temporal resolution of the analysis through the duration of the lag time between closure of the system during exhumation and its deposition in the sedimentary basin. Here, we report apatite fission‐track (AFT) data from 31 detrital samples collected from Miocene to Pliocene stratigraphic sections of the Siwalik Group in western and central Nepal, as well as three samples from modern river sediments from the same area, that complement detrital zircon fission‐track (ZFT) and U–Pb data from the same samples presented in a companion paper. Samples from the upper part of the stratigraphic sections are unreset and retain a signal of source‐area exhumation; they show spatial variations in source‐area exhumation rates that are not picked up by the higher‐temperature systems. More deeply buried samples have been partially reset within the Siwalik basin and provide constraints on the thermal and kinematic history of the fold‐and‐thrust belt itself. The results suggest that peak source‐area exhumation rates have been constant at ∼1.8 km Myr−1 over the last ∼7 Ma in central Nepal, whereas they ranged between 1 and ∼1.5 km Myr−1 in western Nepal over the same time interval; these spatial variations may be explained by either a tectonic or climatic control on exhumation rates, or possibly a combination of the two. Increasing lag times within the uppermost part of the sections suggest an increasing component of apatites that have been recycled within the Siwalik belt and are corroborated by AFT ages of modern river sediment downstream as well as the record of the distal Bengal Fan. The most deeply buried and most strongly annealed samples record onset of exhumation of the frontal Siwaliks along the Himalayan frontal thrust at ∼2 Ma and continuous shortening at rates comparable with the present‐day shortening rates from at least 0.3 Ma onward.
-
-
-
Multiple detachment levels and their control on fold styles in the compressional domain of the deepwater west Niger Delta
Authors Sepribo E. Briggs, Richard J. Davies, Joe A. Cartwright and Richard MorganABSTRACTWe interpret recently acquired two‐dimensional (2D) and 3D seismic data from the contractional domain of the Tertiary deepwater west Niger Delta, which is an area of current hydrocarbon exploration and development to show that during its gravitational collapse, multiple detachments were active. Detachments are located within (1) what we herein refer to as the ‘Dahomey unit’, (2) the transition between the Agbada and Akata formations (Top Akata) and (3) the Akata formation. Seismic interpretation and quantitative measurements of fault displacements show that the utilisation of different detachments results in contrasting styles of thrust propagation and fold growth. Two geographical zones are defined. In zone A (NW sector of the study area), the stratigraphically shallowest Dahomey detachment is dominant and is associated with thrust truncated folds. In zone B (SE sector of the study area), a stratigraphically lower detachment approximately at the Agbada–Akata formation boundary is associated with thrust propagation folds. A third detachment, within the Akata formation, is locally developed and is also associated with thrust propagation folds. The different deformational histories are probably related to the mechanical stratigraphy and the pore‐pressure characteristics of the succession.
-
-
-
Slump folds as estimators of palaeoslope: a case study from the Fisherstreet Slump of County Clare, Ireland
Authors L. J. Strachan and G. I. AlsopABSTRACTFolds and faults preserved within slump horizons are thought to be the only sedimentary structures that primarily reflect palaeoslope direction. By evaluating methods for the analysis of slump folds, the robustness of many palaeoslope and palaeogeographical reconstructions can be tested. Five methods for estimating palaeoslope direction from slump fold orientation data are tested with reference to the Upper Carboniferous Fisherstreet Slump horizon of County Clare, Ireland. These methods are the Mean Axis Method, the Separation Arc Method, the Downslope Average axis Method, the Axial–planar Intersection Method and the Fold Hinge Azimuth and Interlimb Angle Method. Transport determination techniques have mixed success when applied to this example and reveal a mean downslope transport direction of 067°. This result reflects the varied boundary conditions that are possible during slumping, resulting from variations in initial fold geometries, progressive fold formation, spatial and temporal changes in velocity, material properties, pore fluid pressures and the local slope. Without a comprehensive analysis of slump data – using all available techniques – large errors in interpreted transport direction can exist and may invalidate palaeogeographic reconstructions. It is essential to use as many transport determination techniques as possible to determine slip direction accurately. With this in mind, a general procedure for determining palaeoslope directions is suggested and used to examine existing palaeogeographic models for the Clare Basin.
-
-
-
A Neoproterozoic glacially influenced basin margin succession and ‘atypical’ cap carbonate associated with bedrock palaeovalleys, Mirbat area, southern Oman
Authors R. Rieu, P.A. Allen, J.L. Etienne, A. Cozzi and U. WiechertABSTRACTThe Ayn Formation of the Neoproterozoic Mirbat Group comprises <400 m of little‐deformed, glacially influenced basin margin deposits. These deposits are preserved in several palaeovalleys eroded in crystalline basement and overlain by a discontinuous cap carbonate. The Ayn Formation and the cap carbonate, which are superbly exposed along a 20 km SW–NE‐striking escarpment in south Oman, provide important insights into the processes operating on a basin margin during a Neoproterozoic glaciation and its demise. The Ayn Formation comprises units of glacimarine rain‐out diamictite and sediment gravity flow deposits, alternated with units of fluvial and deltaic sandstones and conglomerates, which may have formed by proglacial outwash. The stratigraphic evolution of the Ayn Formation indicates a highly active hydrological cycle during a phase of overall (glacio‐eustatic?) low stand when glaciers advanced into and receded upon bedrock valleys. The transgressive cap carbonate was deposited primarily in shallow marine or shallow lacustrine environments over palaeohighs during the deglaciation, and was partly reworked into deeper parts of the basin through sediment gravity flow processes. Locally, the cap carbonate transgresses over crystalline basement containing a network of fissures filled with carbonate originating from the cap. The δ13C isotopic composition of the cap carbonate varies systematically between −3.5 and +5.8‰ Pee Dee Belemnite standard, in common with other older Cryogenian examples.
-
-
-
Transantarctic Basin: new insights from fission track and structural data from the USARP Mountains and adjacent areas (Northern Victoria Land, Antarctica)
Authors F. Lisker, A. L. Läufer, M. Olesch, F. Rossetti and T. SchäferABSTRACTThe USARP Mountains comprise two N–S‐aligned mountain ranges (Daniels Range, Pomerantz Tableland) located along the western margin of the Rennick Glacier in Northern Victoria Land (NVL). Four zircon and titanite fission track (FT) ages from granitic samples from the Pomerantz Tableland fall in a common range of 369–392 Ma. The apatite FT ages from 20 Granite Harbour Intrusive rocks sampled throughout the USARP Mountains are distinctively younger (86–270 Ma); their mean track lengths (MTL) vary between 11.0 and 13.9 μm. Six samples from Renirie Rocks and the Kavrayskiy Hills east of the USARP Mountains have even younger, concordant apatite FT ages of 43–71 Ma, and MTL of 12.2–14.0 μm. Thermal history modelling of the thermochronological data indicate that both the Daniels Range and Pomerantz Tableland experienced a common Phanerozoic geologic history consisting of a mid‐Devonian pulse of rapid denudation, followed by a protracted denudation stage between the Carboniferous and Jurassic. This latter period of denudation was contemporaneous with the formation of the Transantarctic Basin to the east. We consequently suggest that the USARP Mountains were one of the major source areas for the Beacon Supergroup that formed the fill of the Transantarctic Basin. Subsequent to the deposition of the Beacon sequence, the now‐outcropping rocks of the USARP Mountains were buried to a maximum depth of 4.2 km. A palaeogeothermal gradient of 25±8°C km−1 was inferred at the time of maximum burial. Inversion of the Transantarctic Basin due to the breakup of Gondwana, and in response to Cenozoic rifting and uplift of the Transantarctic Mountains, has triggered the final denudation stages recorded in NVL since the Cretaceous. Thereby, the amounts of denudation increase eastward. Whereas 2.4–4.2 km of crustal unloading are recognized for the USARP Mountains since the Cretaceous, more than 4 km of denudation has occurred towards the Rennick Graben alone since the Eocene. This denudation was associated with major fault activities involving early ENE–WSW to E–W‐directed extension. Related structures were reactivated by dominant NW–SE to NNW–SSE‐oriented right‐lateral shear genetically linked to the formation and inversion of the structural depression of the Rennick Graben in Cenozoic times.
-
-
-
Late orogenic vertical movements in the Carpathian Bend Zone – seismic constraints on the transition zone from orogen to foredeep
Authors K. A. Leever, L. Matenco, G. Bertotti, S. Cloetingh and G. G. DrijkoningenABSTRACTPostcollisional tectonic movements in orogens and their adjacent foreland basins related to intraplate stresses and the presence of a remnant slab are likely to induce significant deformations overprinting the existing patterns of nappe emplacement. In the Carpathian Bend Zone, Romania, vertical motions associated with very limited postorogenic intraplate shortening are of similar magnitude as those generally caused by large orogenic deformations. In the Latest Miocene–Pliocene, up to 6 km of postcollisional sediments of remarkably parallel stratification were deposited in a basin extending over a large part of the present‐day orogen. The Early Quaternary featured a dramatical change as the orogen was uplifted while subsidence continued in the basin, tilting the basin flank adjacent to the orogen to a vertical position. The remnant slab presently below the Bend zone in Vrancea is the prime mechanism to have driven the Pliocene subsidence. The Quaternary changes and the eastwards migration of the pattern of vertical motions can be explained by large‐scale folding, in response to the overall compressive regime that is recorded in the whole Pannonian‐Carpathian area.
-
-
-
Miocene extensional basin development in the Betic Cordillera, SE Spain revealed through analysis of the Alhama de Murcia and Crevillente Faults
Authors B. M. L. Meijninger and R. L. M. VissersABSTRACTThe Alhama de Murcia and Crevillente faults in the Betic Cordillera of southeast Spain form part of a network of prominent faults, bounding several of the late Tertiary and Quaternary intermontane basins. Current tectonic interpretations of these basins vary from late‐orogenic extensional structures to a pull‐apart origin associated with strike–slip movements along these prominent faults. A strike–slip origin of the basins, however, seems at variance both with recent structural studies of the underlying Betic basement and with the overall basin and fault geometry. We studied the structure and kinematics of the Alhama de Murcia and Crevillente faults as well as the internal structure of the late Miocene basin sediments, to elucidate possible relationships between the prominent faults and the adjacent basins. The structural data lead to the inevitable conclusion that the late Miocene basins developed as genuinely extensional basins, presumably associated with the thinning and exhumation of the underlying basement at that time. During the late Miocene, neither the Crevillente fault nor the Alhama de Murcia fault acted as strike–slip faults controlling basin development. Instead, parts of the Alhama de Murcia fault initiated as extensional normal faults, and reactivated as contraction faults during the latest Miocene–early Pliocene in response to continued African–European plate convergence. Both prominent faults presently act as reverse faults with a movement sense towards the southeast, which is clearly at variance with the commonly inferred dextral or sinistral strike–slip motions on these faults. We argue that the prominent faults form part of a larger scale zone of post‐Messinian shortening made up of SSE‐ and NNW‐directed reverse faults and NE to ENE‐trending folds including thrust‐related fault‐bend folds and fault‐propagation folds, transected and displaced by, respectively, WNW‐ and NNE‐trending, dextral and sinistral strike–slip (tear or transfer) faults.
-
Volumes & issues
-
Volume 36 (2024)
-
Volume 35 (2023)
-
Volume 34 (2022)
-
Volume 33 (2021)
-
Volume 32 (2020)
-
Volume 31 (2019)
-
Volume 30 (2018)
-
Volume 29 (2017)
-
Volume 28 (2016)
-
Volume 27 (2015)
-
Volume 26 (2014)
-
Volume 25 (2013)
-
Volume 24 (2012)
-
Volume 23 (2011)
-
Volume 22 (2010)
-
Volume 21 (2009)
-
Volume 20 (2008)
-
Volume 19 (2007)
-
Volume 18 (2006)
-
Volume 17 (2005)
-
Volume 16 (2004)
-
Volume 15 (2003)
-
Volume 14 (2002)
-
Volume 13 (2001)
-
Volume 12 (2000)
-
Volume 11 (1999)
-
Volume 10 (1998)
-
Volume 9 (1997)
-
Volume 8 (1996)
-
Volume 7 (1994)
-
Volume 6 (1994)
-
Volume 5 (1993)
-
Volume 4 (1992)
-
Volume 3 (1991)
-
Volume 2 (1989)
-
Volume 1 (1988)