- Home
- Conferences
- Conference Proceedings
- Conferences
11th Simposio Bolivariano - Exploracion Petrolera en las Cuencas Subandinas
- Conference date: 29 Jul 2012 - 01 Aug 2012
- Location: Cartagena, Colombia
- Published: 29 July 2012
51 - 100 of 184 results
-
-
Campos Apiay y Suria, treinta ańos después: Una perspectiva geológica
More LessLos Campos Apiay y Suria descubiertos por Ecopetrol se localizan en el sector del “Foreland” de la Cuenca Llanos de Colombia, a la fecha han producido 250 MM barriles de petróleo de diferentes calidades y de tres unidades estratigráficas. Desde su descubrimiento ha cambiado progresivamente la visión geológica con un impacto directo en el incremento de reservas y producción así como en la visualización de nuevas áreas prospectivas, gracias al trabajo en equipo y a la continua aplicación de tecnologías de última generación. Su desarrollo se agrupa en tres etapas: la primera abarca los diez primeros años donde se perforan pozos de evaluación, delimitación y de desarrollo basados en información sísmica 2D y en un modelo geológico estructural de extensión y compresión, focalizados principalmente en el desarrollo de la unidad K2. Una segunda etapa inicia con la adquisición de sísmica 3D, que después de su interpretación cambia sustancialmente el modelo estructural a uno compresivo con componente de rumbo y permite la perforación de nuevos pozos en locaciones óptimas, maximizando su productividad aquí se incluye el primer pozo horizontal, adicionalmente se visualizan nuevas áreas adyacentes, en esta etapa se continua focalizando en el K2 y visualiza la potencialidad de la unidad K1. En la tercera etapa se hace reprocesamiento sísmico, reinterpretación estructural y estratigráfica, modelos de inversión sísmica y de atributos sísmicos lo que permite una agresiva campaña de perforación “infill” con pozos altamente desviados y horizontales, se desarrollan conjuntamente las unidades K2, K1 y T2. Actualmente se continúa reinterpretando y planteando nuevas ideas.
-
-
-
Current practises in design of 3d land seismic programs or: “3d” stands for design for density and diversity
More LessBy the early ‘90s we were focused on how to produce a good and stable stacked section, then we would post-stack migrate our volumes. Spatial resolution was related to bin size. Designs were driven by considerations of desired fold (determining line spacings) and post-migration resolution (determining bin size). Design philosophy could be summarized as: “design parameters that will produce a good stacked data volume, and account for the fact that post-stack migration will steepen dips and require smaller stacked trace intervals, therefore smaller bins”. With Pre-stack time migration we realized that fold and bin-size were not the most important driving factors. Producing a data set that provides good sampling of migration operators in all domains will allow the migration process to output data of maximum resolution. Output trace spacing is not limited to bin size. Design philosophy shifted from a focus on fold and bin-size to a focus on trace density and statistical diversity (in offsets, azimuths and midpoints). In other words: “design parameters that deliver what is needed by a pre-stack migration operator and then let the migration produce the image we need”. Now based on 5-component COV matrix completion data reconstruction, we can restate our objective as: “design parameters that deliver what is needed for robust interpolation, then the interpolator will provide the traces needed by a pre-stack migration operator and then the migration will produce the image we need”.
-
-
-
“Santonian Channelized Systems of The Santos Basin, Brazil: New Discoveries and Perspectives”
The Santos Basin is located in the Southeast region of Brazilian continental margin. It encompasses around 350,000 km2 of area, limited to the North with The Campos Basin by the Cabo Frio High and to the South with The Pelotas Basin by the Florianópolis Platform (Figure 1). In the same year of its creation OGX acquired four (4) exploration blocks in the 9th Bid Round organized by the National Petroleum Agency (ANP). Located in the Santos Basin these four blocks are situated in water depths of 150 meters and at 90 km from the coast of the states of Săo Paulo and Rio de Janeiro. The Santos Basin Petroleum Systems are well known and very active as confirmed by many recent discoveries made from 2002 on. Two important intervals of source rocks are present in the basin, (a) the Barremian (~128 My) lacustrine shales and (b) the Albian-Cenomanian (~99 My) marine shales. These source rocks generated the oil and natural gas discovered in reservoirs of many types and ages: (a) Eocene Sandstones in the northern part of the basin, (b) Santonian and Campanian Sandstones in the central part, (c) Oligocene and Albian-Cenomanian Sandstones and Albian Oolitic Calcarenites in the southern part and, (d) most recently, the Aptian Microbiolite Carbonates in the Pre-Salt area. Additionally, OGX found in its shallow water blocks Albian fractured Carbonates. The present work focuses on the discoveries that OGX has made in sandstones belongs to Santonian channelized systems. It will show the stratigraphic framework of these Santonian reservoirs and to try understanding the evolution of these systems in terms of sequence stratigraphy. Finally, it will present the OGX plans to delimit and to development this area, considering the potential of production, which was confirmed by two formation tests in different discoveries, Natal and Maceió prospects. These discoveries are the result of an aggressive investment plan and innovative exploratory vision of OGX.
-
-
-
Robust prediction of pay sands in clastic reservoirs with seismic inversion attributes, Campos basin, Brazil
Authors Heidy Correa-Correa, Gunnar Holmes and Joshua WoodworthThe Eocene deepwater sandstones are the main target in several fields in the Campos basin in Brazil. These sandstones are considered typical unconsolidated to partially consolidated clastic reservoirs, with porosity values in the range of 26-28%. Recent publications have shown the effectiveness of AI-SI attribute derived from seismic inversion to highlight zones of interest in clastic reservoirs, particularly in Brazil.
-
-
-
Intermontane basins and hydrocarbon potential at the Central to Northern Andes
Authors Wilver Hermoza, Roger baudino and Maria Baca-AlvarezIn the Central to Northern Andes transition zone (Ecuador and Northern Peru), several Tertiary intermontane basins have been preserved (e.g. Bagua Basin in Peru, Zumba, Nabon, Loja, Malacatos- Vilcabamba, Giron and Cuenca basins in Ecuador). The analysis of these intermontane basins showed similarities in their sedimentological evolution and ages of infilling; however structurally, three groups can be separated: the Cuenca and Giron-Santa Isabel basins related to dextral movement of allochtonous terranes sutures (Raspas- Peltetec; Calacali-Pallatanga-Palenque). The Loja and Vilcabamba-Malacatos basins are associated to N-S sutures activation (Las Aradas- Zamora). The third group includes the Bagua Basin and others small piggyback basins purely related to the eastward migration of the main fold and thrust deformation front of the Central Andes during the Upper Miocene. Exploration point of view, the Miocene intermontane basins often contain a thick sequence of lacustrine and/or shallow marine deposits that could host potential source rocks. Indeed, coal layers are described and were traditionally exploited for domestic use. Nevertheless, the Miocene basin fill could at depth have triggered the activation of Mesozoic and older petroleum systems. In the area of the Bagua Basin exists two potential petroleum systems. The Jurassic (Aramachay Fm) and Cretaceous (Goyllarisquizga Gp and Inca Fm) sequences have an excellent source rock potential. One oil seep sample hosted in the Upper Cretaceous reservoirs was collected in the Bagua Basin. According to its geochemical characterization it is from a marine source rock, kerogene type II and a Pre-Cretaceous age has been postulated.
-
-
-
“Parnaíba Basin – The Awakening of a Giant”
The Parnaíba Basin is located in a considered exploratory frontier area, in the Brazilian Northeastern Region. The basin has about 600.000km² with a sedimentary section reaching approximately 3.500m thickness in its depocenter (Fig. 1). The Parnaíba Basin returned to the oil exploratory scenery after two decades without activities, with the discovery of two gas fields, two other accumulations in delimitation stage and significant hydrocarbons shows in recent drilled wells. The Gavião Real and Gavião Azul fields are now under production development phase, and the Bom Jesus and Fazenda Torrão accumulations are being evaluated by field delimitation phase. These discoveries are the result of an aggressive investment plan and innovative exploratory vision of OGX Petróleo e Gás S. A., acting with MPX Energia S. A. and Petra Energia S. A. in seven blocks and with MPX Energia S. A. and Imetame-Delp-Orteng Consortium in one block, as partnerships, breaking old paradigms toward Paleozoic basins. Using 2D and 3D seismic data, acquired in record time, and incorporating new ideas and alternative geological models has resulted in great success to the basin so far. The great number of mapped leads to be drilled in the future, based in the updated seismic interpretation, points out an expressive hydrocarbon potential in the Parnaíba Basin increasing OGX’s portfolio by far.
-
-
-
An investigation of the provenance and post-depositional thermal history of the Cenozoic Amagá Formation from the transition between the Cordillera Central and Oriental, Colombia
Authors Ian Duddy, Pedro Parra Mantilla, Vicente Rodriguez and Paul GreenThe Oligo-Mioceno Amagá Formation comprises at least 1500 m of non-marine quartzose and lithic sandstones, carbonaceous shale and coals preserved in a roughly linear basin along the Cauca Valley, west of the Romeral fault system in the transition between the Western and Central Cordillera of Colombia. We have used AFTA® apatite fission track analysis and ZFTA zircon fission track analysis to provide unique constraints of the provenance and post-depositional the thermal and burial histories of a suite of Amagá Formation sandstones from the vicinity of Santa Fe de Antioquia (near Medellin). Independent constraints on the maximum temperatures experienced by associated coal seams have been determined from vitrinite reflectance data. These results have important implications for the source of the Amagá Formation sediments and the tectonic evolution of the adjacent Altiplano Antioqueño of the Central Cordillera, where AFTA data show clear evidence of kilometre-scale denudation during the Late Eocene to Early Miocene (40 to 20 Ma) and since the late Early Miocene (18 to 0 Ma), overlapping with the deposition of the Amagá Formation. The ability of AFTA to provide direct constraints on the time at which both sedimentary and “basement” sequences were uplifted and eroded in tectonically complex regions provides a powerful tool for understanding the tectonic evolution of Colombia during the Cenozoic.
-
-
-
Presencia de Gilsonita y bitumen en la cuenca Valle Medio del Magdalena: “Un reto para la perforación exploratoria”
Authors R. Acevedo, D. Daza, M. Prince, D. Rojas and C. SanchezLa “Gilsonita” o bitumen es un hidrocarburo sólido del grupo de las asfaltitas que en el sector norte de la cuenca Valle Medio del Magdalena –VMM-, se ha presentado tanto en afloramientos de rocas sedimentarias como en subsuelo (relacionada ya sea a la posible roca fuente o a secuencias siliclásticas posteriores), y aprovechando zonas de fallas. En otroas partes es conocida como Uintaita, asfaltita ó asfalto natural. Es brillante, de color negro, fractura concoidea, en apariencia muy similar a la del mineral Obsidiana. Durante la última campaña de perforación llevada a cabo por Petronorte S.A. entre 2009 y 2010 en la cuenca VMM, se detectó presencia de Gilsonita en dos pozos, en los dos casos ocasionó serios problemas durante la perforación tales como pérdidas de lodo y empaquetamiento, ya que la aparición de este mineral en el subsuelo presenta complicaciones desde el punto de vista mecánico a profundidades mayores a 6500 pies. La información de ocurrencia de Gilsonita durante perforación de pozos es escasa al igual que la documentación de estudios geológicos relacionados con su génesis en cuencas colombianas. Dar a conocer los resultados de perforación y de análisis de muestras permite abrir una discusión técnica tanto para las actividades de exploración como de perforación (análisis de muestras de pozo y afloramiento, métodos de disolución, identificación con atributos sísmicos, procesos de generación – migración de hidrocarburos, etc) con el fin de conocer la experiencia de este tipo de ocurrencias en subsuelo. Este trabajo describe de forma general las tres diferentes ocurrencias de Gilsonita en la cuenca VMM en Colombia con el fin dar a conocer sus actividades de perforación asociadas y aportando al entendimiento de su geología.
-
-
-
ESTIMACIÓN DE RIESGO EXPLORATORIO APLICANDO TECNICAS DE TOMA DE DECISIÓN BAJO INCERTIDUMBRE
Authors Rober Yibirin and Juan ArminioEn los últimos treinta años, la industria de exploración de hidrocarburos ha incorporado técnicas probabilísticas y de toma de decisiones bajo incertidumbre para estimar el valor relativo de activos exploratorios, sean estos plays, pista (“leads”) ó prospectos. En este trabajo presentamos un análisis crítico del cálculo del Riesgo Exploratorio tal como se aplica en la actualidad y proponemos el uso consistente y sistemático de las técnicas de toma de decisiones bajo incertidumbre para estimar la probabilidad de éxito al evaluar prospectos exploratorios. En tal sentido proponemos una aproximación alterna al método multiplicativo que involucra probabilidad de éxito de factores individuales del sistema petrolero actualmente en uso. Esta opción permite incorporar al cálculo un mayor número de variables del sistema petrolero, admitiendo una posible interdependencia entre ellas.
-
-
-
Mejoramiento de la Imagen Sísmica y su Aplicación en la Definición de Sistemas Turbidíticos Asociados al Abanico del Magdalena
Authors Claudia Duenas, Sonia Ospina, Sergio Ibańez and Jaime MartinezEn la última década se ha realizado adquisición sísmica marina 2D y 3D en la costa Caribe Colombiana, en el Abanico del Magdalena. La identificación de trampas con importante componente estratigráfico ha planteado retos en términos de imagen sismica, contenido de frecuencia y en algunos casos preservación de amplitudes en las áreas de interés. La absorción de energía en capas de carbonatos, los múltiplos asociados al fondo marino, la baja relación señal/ruido, las bajas frecuencias y la presencia del BSR (“Bottom simulating reflector”), se han identificado como las causas principales del deterioro de la imagen sísmica. Con el fin de mejorar la calidad de los datos y reducir los problemas mencionados, se realizaron procesamientos que incluyen migraciones preapilado en tiempo y en profundidad usando algoritmos como Kirchhoff, WEM (“Wave equation migration”), CBM (“Control Beam Migration”); incluyendo anisotropía VTI (“Vertical Transverse Isotropy”) en algunos casos. Los resultados muestran imágenes sísmicas con mejor relación señal/ruido y aumento del contenido de frecuencias en algunos casos, lo cual reduce la incertidumbre en la definición de prospectos y estimación de recursos.
-
-
-
Modelo Integrado de Visualización de Activos (MIVA) de ECOPETROL para Oportunidades de Desarrollo
Authors Fabian Betancourt, Hugo Gonzalez, Luis Castańeda, Luis Garcia, Orietta Mata, Juan Pinzon and Cesar MantillaEl Grupo de Oportunidades de Desarrollo de ECOPETROL, ha configurado un Modelo Integrado de Visualización de Activos para Oportunidades de Desarrollo basado en la conocida metodología FEL y el concepto de toma de decisiones bajo incertidumbre y riesgo asociados a la formulación de planes de desarrollo de activos petroleros. El modelo consiste en la integración de los flujos de trabajo para la identificación y evaluación de las oportunidades de negocio, con base en el establecimiento de un plan de desarrollo conceptual para un activo. La recopilación de antecedentes, la discusión de problemáticas relacionadas con la operación del mismo, la definición de variables, las limitaciones y/o restricciones relacionadas con aspectos contractuales, legales y ambientales; los criterios de evaluación económica, riesgos y la identificación y evaluación de alternativas forman parte del conjunto de procesos enfocados en alcanzar el escenario de mayor valor para la compańía. Utilizando una aplicación de última generación, la cual permite la integración de múltiples tipos de datos así como la visualización e interpretación de los mismos, se pudieron analizar diferentes capas de información tales como: data sísmica, modelo estructural, modelo de producción, infraestructura petrolera en la región, planes de desarrollo, información de pozos, costos y producción, caracterización ambiental e información regional, etc. tomando como ejemplo los resultados obtenidos en el desarrollo incremental del activo Lisama, Colombia. Esta información se analizo holísticamente por medio de seis flujos de análisis y una herramienta de evaluación económica que incorpora conceptos de riesgo e incertidumbre a cada una de las alternativas.
-
-
-
“CARACTERIZACIÓN GEOQUÍMICA DE FLUIDOS OBTENIDOS DE LA FORMACIÓN CANSONA, CUENCA SINÚ-SAN JACINTO, COLOMBIA”
Authors N. Reyes, R. Marquez and L. MogollónEn la Formación Cansona de la Cuenca Sinú-San Jacinto, se realizó un levantamiento de diez secciones estratigráficas, en cinco localidades, a partir del cual fueron recolectadas 476 muestras; evaluadas con geoquímica orgánica, de estas 91 muestras de extractos fueron analizadas por medio de cromatografía liquida y gaseosa acoplada a espectrometría de masas (GC MS). Los extractos analizados permitieron definir a partir de los biomarcadores, una variabilidad en el aporte de carbonatos y de materia orgánica tanto de origen terrígeno como marino.La Formación Cansona, presenta ambientes de depósito que van desde plataforma marino a transicional, el ambiente marino con una influencia carbonática, está representado en las secciones 2, 3 y 4 (zonas Central y Sur). La sección 2 representa la mayor influencia carbonática, evidenciado por las relaciones TT24/tr26 (0.88; 1.04 y 0.77) y diasteranos/esteranos (0.06; 0.03 y 0.05), y corroborado por los altos porcentajes de carbonatos (carbono inorgánico = 1.4, 8.8 y 7,7), adicionalmente se destaca, las altas concentraciones del gamacerano, y las bajas condiciones de oxigenación (H35/H34 >1). En las secciones 6-1 (zona norte) y sección 5 (zona sur), se aproximan a un ambiente transicional, donde la sección 5, analizada por primera vez, representa un ambiente más proximal, con un alto contenido de materia orgánica terrestre, (OL/Hop= 0.23 a 0.54), la influencia carbonática es casi nula, (diasteranos/esteranos = 0.61 a 1.13, y carbono inorgánico = 0.01 y 0.05) y las condiciones de oxigenación altas (p/f entre 2.4 y 4.7).
-
-
-
Cartografía geológica a escala 1:100.000 de las planchas 340, 362, 385 y 409. Contribución de la ANH al conocimiento de la cuenca de Tumaco
La cartografía geológica a escala 1:100.000 de las planchas 340, 362, 385 y 409 es una contribución de la Agencia Nacional de Hidrocarburos – ANH al conocimiento de cuencas denominadas “fronteras” en especial en lo pertinente a su estratigrafía, modelo estructural y evolución tectosedimentaria. Es importante mencionar que INGEOMINAS desarrolló en el año 2005 un proyecto enfocado a definir aspectos geomorfológicos y geológicos en el Andén Pacifico desde una perspectiva de sensores remotos y poco control de campo, no obstante, representaron un soporte básico para el desarrollo de las primeras fases de este proyecto. Este estudio pretende aumentar el nivel de detalle cartográfico sobre el borde oriental de la Cuenca Tumaco con énfasis en su potencial generador y productor de hidrocarburos, por lo cual la ANH contrata la firma Geología Regional y Prospección - GRP Ltda con la interventoría de la Universidad de Caldas, quienes realizaron 249 análisis de Petrografía, 102 de petrofísica, 93 de geoquímica, 114 de bioestratigrafía, 16 de geocronología y 39 de litogeoquímica, hicieron el levantamiento geológico de las planchas en mención, realizaron columnas tipo sobre el Grupo Dagua y la Formación Raposo, perfiles e integraron la información geofísica preexistente y 1798 estaciones en geológicas en campo. El resultado es un incremento en el conocimiento de formaciones presentes en la zona tales como: Formación Raposo, Complejo Timbiquí, Gabronorita de Nulpi, Granodiorita de Piedrancha, los Grupos Dagua y Diabásico y Ultramafitas de Guapi, se describen sus relaciones estratigráficas, estructurales, geoquímicas, faciales y un análisis detallado de la geología del petróleo y sus posibilidades en este sector de la cuenca del Tumaco hacia su borde oriental. Así mismo se establecieron correlaciones entre las sucesiones estratigráficas identificadas en campo y las secuencias sísmicas de los programas Pacífico 82 y Tumaco - 90, a su vez se correlacionan con las secuencias descritas en los pozos Remolino Grande-1 y Majagua-1, se correlaciona la Formación Raposo de edad Mioceno Tardío con la Formación San Agustín presente en el Alto de Remolino Grande, al igual que el Grupo Dagua correlacionable con los sedimentos cretácicos presentes a la base del pozo Remolino Grande-1.
-
-
-
Timing of deposition and assesing the characteristic of potential carbonate oil reservoir along the southeastern circum-caribbean region
Authors J.C. Silva-Tamayo, C. Montes, A. Cardona. A. Pardo, D. Rincon, C. Jaramillo, G. Bayona, V. Ramirez, E. Nińo, M. Ducea, A. Sial, S. Rosero, V. Zapata, P. Zapata, C. Osorio and C. EcheverryCenozoic coralline and calcareous algae reef carbonates have long been recognized as important oil & gas reservoirs along the Circum-Caribbean Region. Despite their high oil & gas reservoirs potential, timing the deposition of reef carbonate units along this area has remained problematic due to extreme sediment recycling and complex tectonic evolution. Here we use Sr-isotope chemostratigraphy and carbonate U-Pb geochronology to precisely date in-situ corals and calcareous algae facies from several reef carbonate successions along the SE Circum-Caribbean. Detailed stratigraphic, sedimentologic and paragenetic characteristics of the studied sucessions are contrasted against their depositional ages. This allows constraining temporal variations in the structures of the reef carbonate systems along the SE Circum-Caribbean. Predominantly highly porous calcareous algae reef carbonate sucessions characterize the Eocene-Oligocene and the middle Miocene carbonate record in central and eastern Panama and northwestern Colombia. Higly porous coralline reef carbonate fabrics, often mixed with siliciclastic sedimentary facies, characterize, in turn, the late Oligocene, the late Miocene and the Pliocene reef carbonate record from northern Colombia. The stratigraphic, sedimentologic and paragenetic characteristics of the studied successions combined with their depositional ages allow identifying time intervals of carbonate sucessions displaying different oil & gas reservoir potentials. We propose a chronostratigraphic chart with main stratigraphic, sedimentologic and paragenetic (diagenetic) features for the SE Circum-Caribbean carbonate record that can be used as a reference during the search of regionaly occurring reef carbonate oil and gas reservoirs analoges along the Caribbean.
-
-
-
Evolución Tectono-Estratigrafica del Abanico del Magdalena, Caribe Colombiano
Authors Jaime Martinez, Jaime Castillo and Andrea OrtizLa integración de la interpretación de los datos sísmicos 3D, el análisis de la estratigrafía sísmica, la limitada información de pozos y la geología regional, han servido para obtener un mejor entendimiento de la evolución del Abanico del Magdalena. La geología regional es reflejo de la interacción entre las placas tectónicas del Caribe y Sur América y los consecuentes levantamientos de las Cordilleras, la Sierra Nevada de Santa Marta y los Cinturones Plegados de Sinú y San Jacinto, que se manifiestan en el registro geológico como discordancias identificables en la sísmica. El análisis de estas superficies, junto con las facies sísmicas asociadas permite generar un marco crono-estratigráfico coherente a pesar de la incertidumbre en las dataciones absolutas. Se concluye que el Abanico del Magdalena empezó su sedimentación en el Mioceno Medio, luego de la transgresión regional del Oligoceno, como consecuencia de la principal fase de acreción del Cinturón Plegado de San Jacinto. Desde el inicio hasta hoy se desarrolla una megasecuencia progradante en la cual se destacan tres principales ciclos. El primer ciclo va desde la base del abanico hasta el Mioceno Superior y está caracterizado por depósitos turbiditicos con desarrollo de lóbulos terminales a la base (terminal lobes or frontal splays), seguidos por complejos de canales confinados (confined channel complexes) y terminando el ciclo con un incremento de arenas en depósitos de lóbulos y canales no confinados. El segundo ciclo se inicia con depósitos de complejos de canales confinados y termina en el Plioceno Superior- Pleistoceno, con la presencia de un depósito de remoción en masa que eroda gran parte de la secuencia anterior; y el último ciclo de edad Pleistocena se compone de arenas no confinadas (splays y sand sheets) a la base y seguidos por canales confinados que se vuelven más lodosos hacia el tope, como consecuencia de una subida relativa del nivel del mar relacionada con el fin de la era glacial.
-
-
-
Estratigrafía e Historia de Subsidencia de la Cuenca de Antearco de Tumaco (SW de Colombia) durante el Intervalo Eoceno – Plioceno
Authors Sebastian Echeverri, Agustin Cardona, Andres Pardo, Jairo Osorio and Sergio LópezLa integración de la información estratigráfica del relleno sedimentario cenozoico de la cuenca de antearco de Tumaco, basada en la información de los pozos exploratorios perforados en el segmento onshore, permite identificar tres megasecuencias con rangos de edades desde el Eoceno hasta el Plioceno. La megasecuencia Eoceno-Oligoceno, dominantemente lutítica, es considerada como el intervalo generador de hidrocarburos en esta cuenca. La megasecuencia Mioceno temprano-Mioceno medio y la megasecuencia Mioceno tardío-Plioceno, constituidas por sucesiones arenosas y en menor proporción lutíticas, son consideradas como rocas reservorio y sello. La identificación de los elementos del sistema petrolífero, asociado con los shows de gas y aceite reportados en los pozos Remolinogrande-1, Majagua-1 y Chagüí-1, permite soportar directamente la presencia de un sistema generador de hidrocarburos para la cuenca de antearco de Tumaco onshore. La historia de subsidencia de la cuenca de antearco de Tumaco, obtenida a partir de la técnica de modelamiento Backstrip 1D en el pozo Majagua-1, indica que el segmento Sur de ésta cuenca, presentó un fuerte incremento en las tasas de subsidencia durante el Mioceno tardío. El aumento en las tasas de subsidencia favoreció la capacidad de generación de hidrocarburos por sobrecarga de sedimentos. Además, la identificación de este evento, es de importancia en el entendimiento del sistema petrolífero de esta cuenca, ya que para este intervalo de tiempo se presenta un sincronismo favorable entre la expulsión de hidrocarburos y la configuración de las trampas.
-
-
-
Pitfalls in converting Time-to-Depth in complex Sub-Andean basins in Colombia
Authors Antonio Velasquez and Hector AlfonsoVelocity variations affect the quality of seismic data and hinder the interpreters from defining both structure and lithology. Structural complexity, particularly in land seismic data, is responsible for both poor imaging and getting mispositioned events in depth. In spite the advances in migration, its ability to provide right depths is quite often limited because of there is a substantial difference between the migration velocity -the best for proper imaging-, and the vertical velocity, used to perform the time-to-depth conversion (depthing). The main reason for this discrepancy is seismic anisotropy, however sometimes it cannot be adecuately included in data processing of complex areas; therefore depthing is still a crucial step in the interpretation process. Several techniques for depthing are based on vertical velocity modeling from different approaches. Using study cases in areas of complex geology, we explain advantages and limitations of the most common methods: 1) Time-Depth “Velocity” Functions, 2) Layer Cake Methods, 3) Laterally-Varying Layer Cake Modeling; and 4) Geostatistical Velocity Modeling. There is no a unique recipe for chosing one of those, but depending on the complexity and availability of high-quality data, different methods can be applied or cobined to obtain better results. Most of the pitfalls come from misunderstanding the type of velocity used for both imaging and depthing. In general, a good velocity model is the one that better honor the data and reproduce the geologic trends at the same time. From the real case studies, we propose Laterally-Varying Layer Cake and Geostatistical velocity models as standar procedures for depthing in Andean complex structures.
-
-
-
Ladrilleros-Juanchaco: una sección de referencia del Mioceno en el Pacífico colombiano
Authors Andrés Pardo-Trujillo and José Abel FloresA pesar de que la cuenca Tumaco presenta potencial para el hallazgo de hidrocarburos, aun no se conocen en detalle las características y edad de su relleno sedimentario. La sección estratigráfica Ladrilleros-Juanchaco (municipio de Buenaventura), posee el registro más completo del Mioceno medio-tardío (Burdigaliano-Tortoniano) de la costa Pacífica colombiana. Sus condiciones de fácil acceso, abundancia de microfósiles (foraminíferos, nanofósiles calcáreos, polen y esporas) y, la calidad y exposición de los afloramientos permiten proponerla como una sección de referencia para el estudio de los controles geológicos, climáticos y oceanográficos presentes en el noroccidente de Suramérica. Corresponde a una sucesión terrígena de más de 700 m de espesor, conformada por lodolitas ricas en materia orgánica, con algunas intercalaciones de arenitas líticas. Se reconocen las biozonas estándar de foraminíferos y nanofósiles, así como horizontes biocronológicamente datados con aplicación global. Las asociaciones de estos microfósiles permiten registrar cambios en los patrones de productividad a escala de 100 Ky. Se destaca la presencia de diferentes tipos de icnofósiles que indican las icnofacies Zoophycos y Nereites. Las características halladas permiten interpretar medios marinos alejados de la costa, con influencia de corrientes turbidíticas y de contorno. Hacia la parte superior de la secuencia es notable el aumento en palinomorfos terrestres y fragmentos vegetales que, al parecer, coincide con el descenso eustático del nivel del mar de comienzos del Tortoniano.
-
-
-
Un nuevo yacimiento productor de hidrocarburos en los niveles basales del Grupo Real, en la cuenca VMM – Un caso histórico
Authors R. Acevedo, A. Delgado, M. Prince and M. SilvaEl Grupo Real se presenta en la parte norte de la cuenca VMM como una espesa secuencia de conglomerados, areniscas y shales depositadas en un ambiente continental que suprayace los principales reservorios del Terciario y Cretácico. Esta secuencia no ha sido considerada un reservorio efectivo para la acumulación de hidrocarburos, siendo menospreciada durante la perforación de muchos pozos y poco evaluada a pesar de los indicios y trazas encontradas en los mismos. El pozo Serafín-1, perforado en 1991, alcanzó una profundidad de 7002 pies y su objetivo principal eran las arenas basales de la Formación Lisama, productoras en esta parte de la cuenca, pero esta unidad no fue encontrada, debido a que está erodada por la discordancia del Mioceno. Durante su perforación se identificaron trazas de hidrocarburos en una arena de 16 pies encima de la discordancia, correspondiente a las Arenas Basales del Grupo Real. El pozo fue abandonado ese mismo año por ser considerado un yacimiento “pequeño”. Dadas las condiciones actuales propicias para el mercado de gas, Petróleos del Norte S.A. – PetroLatina Energy Plc programó y realizó un workover de re-entry al pozo en 2007, ejecutando la prueba inicial de producción. En 2011, luego de realizar la logística involucrada para la construcción de facilidades de superficie y conexión al gasoducto Ballenas–Barrancabermeja, se dio inicio a producción en modalidad de prueba extensa, identificando un volumen recuperable de 4.5 GSCF, con una producción diaria promedio de 5 MSCF, convirtiendo este proyecto en la primer área comercial productora de hidrocarburos en los niveles basales del Grupo Real.
-
-
-
Proyecto piloto de inyección cíclica de vapor en el Campo Capella – Cuenca Caguán, Colombia
Authors C. Albornoz, J. Ramon, C. Correa, F. Kondo and J. MoraSiendo el Campo Capella una acumulación de crudo extra-pesado, se planteó realizar una prueba piloto de Inyección Cíclica de Vapor, se muestran los estudios y modelamiento analítico realizados para el diseńo del piloto el cual alcanzó en la producción en caliente hasta 5.4 veces la tasa de producción en frío.
-
-
-
Pozos Horizontales vs Verticales, Simulación Numérica y Caso Histórico del Campo Capella
Authors Cirlia Albornoz, Oscar Jaramillo, Juan Ramon, Maria Bernal, Maria Murillo and Li YupengEl Campo Capella se encuentra ubicado en San Vicente del Caguán en Colombia, el mismo fue descubierto en el ańo 2008 cuando se perforó una estructura anticlinal fallada, definida por información sísmica 2D del ańo 1976; es una acumulación de crudo extra pesado de 9.5°API y altas viscosidades, que actualmente produce por recobro primario. La formación objetivo Mirador, de arenas no consolidadas, con un espesor promedio de 30 pies y porosidades promedio de 31%. Durante el avance de estudio del plan de desarrollo del campo, se visualizó la alternativa de incrementar la producción con pozos horizontales. Por ello, desde las disciplinas de geología, yacimientos, perforación y producción se revisaron las técnicas adecuadas para la construcción de un pozo horizontal ajustado a estas condiciones. Se construyó un modelo estático y se realizaron simulaciones numéricas para determinar la factibilidad de dicha perforación. En la simulación se estimaron el potencial de producción y reservas contactadas en contraste con los pozos verticales, incluyendo sensibilidades en la longitud de la sección horizontal y en la posición en la vertical. Adicionalmente, se describe el diseńo para del mecanismo óptimo de control de arena; datos de la trayectoria y técnicas de perforación. Finalmente, se presentan los resultados en producción del primer pozo horizontal del campo, que incrementó 4 veces la tasa promedio de los pozos verticales. Este resultado impulsó la perforación de pozos horizontales en el Campo Capella.
-
-
-
“Reserves Growth Potential” en Colombia una realidad para el logro de las MEGAS de Ecopetrol G.E.
e enfrentan el “Middle y el Dowstream”.
-
-
-
“Nueva estrategia exploratoria cercana a los Campos (“Near Field Exploration - NFE”) – Metodologia y Resultados en Ecopetrol S.A.
Authors Cesar Rojas, Adriano Lobo, Paola Pastor, Dignora Davida, Natalia Londońo and Eliseo AcevedoEcopetrol definió que la estrategia de búsqueda de oportunidades exploratorias cercana a los campos ( “Near Field Exploration - NFE”) fuese soportada, ejecutada y completamente integrada a las estrategias de desarrollo de los campos en Producción en sus áreas de operación directa. Este cambio de estrategia ha permitido identificar oportunidades que conducirán a incrementar producción y reservas asociadas a dichos campos y optimizar los costos de perforación y producción de los mismos. Teniendo en cuenta las opciones de crecimiento pudieran existir en áreas cercanas a los campos de producción de áreas de operación directa de Ecopetrol, se definió que la Superintendencia de Yacimientos (SYA) con la evaluación de Riesgos en conjunto con Exploración, realizará la prospección de hidrocarburos y evaluaciones técnicas en un corredor de hasta dos y medio kilómetros (2,5) lineales a partir del máximo cierre que circundan tales campos. El artículo presenta la metodología, el proceso y los resultados de la implementación de esta estrategia que ha permitido tomar ventaja del conocimiento técnico de los campos e incorporar campañas exploratorias dentro de las campañas de Producción (y sus Facilidades) asegurando la implementación de estas oportunidades Exploratorias. Con esta estrategia se han definido y están en evaluación más de 90 oportunidades Exploratorias cercanas a los campos colectadas de estudios hechos previamente por los equipos de Exploratorios y por los equipos de Yacimientos, siendo hoy la base para el portafolio .
-
-
-
Desarrollo de un modelo computacional para flujo bifásico en tres dimensiones usando el método de volúmenes finitos
Authors Nelson Quintero and Fernando CalveteEl método de los volúmenes finitos permite discretizar y resolver numéricamente ecuaciones diferenciales que modelan el comportamiento de flujo de calor, flujo de fluidos o acoplados. Es un método que tiene la flexibilidad de los elementos finitos en cuanto al manejo de mallas estructuradas y no estructuras (ortogonales o no ortogonales) y la robustez y convergencia de las diferencias finitas. La principal propiedad es que la solución obtenida del sistema de discretizado satisface en forma exacta las ecuaciones de conservación masa y energía independientemente del tamańo de la malla. Por tal razón los volúmenes finitos resultan ser una excelente opción en la solución de las ecuaciones que modelan el comportamiento del flujo de fluidos a través de un medio poroso de un yacimiento petrolífero y a su vez brinda la adaptabilidad a dominios irregulares como las estructuras geológicas. En este trabajo plantea la solución a un conjunto de ecuaciones que rigen el comportamiento de una mezcla bifásica (petróleo-agua) de fluidos sobre un dominio tridimensional poroso aplicando el método de los volúmenes finitos. El objetivo es desarrollar un modelo computacional y comparar mediante modelos geológicos conceptuales los resultados obtenidos en el comportamiento de los fluidos y presiones (masa-energía) sobre una malla no estructura con los generados en un simulador de diferencias finitas con malla estructurada (simulador comercial). Esta aplicación computacional podría usarse principalmente en el modelamiento de yacimientos aceite negro con acuíferos activos.
-
-
-
Modelamientos Numéricos 3D de Sistemas Petrolíferos en la Cuenca Cesar – Ranchería: Nuevas Ideas Acerca de su Potencial Petrolífero
Authors Maria Martinez de Vivas, Wilmar Caldéron, Wilson Zamora and Iván RodriguezEl potencial de hidrocarburos de la Cuenca Cesar – Ranchería ha sido considerado limitado debido a problemas de sobre-madurez de las rocas generadoras, preservación de hidrocarburos y trampas. Sin embargo, datos geoquímicos indican que la cuenca puede tener potencial exploratorio económico. Esto motivó a ECOPETROL a realizar modelamientos numéricos 3D de sistemas petrolíferos de las secuencias sedimentarias Mesozoicas y Cenozoicas, integrando información geofísica, de pozos, geológica y geoquímica de la cuenca.
-
-
-
Monitoreo de cambios en saturación para procesos de inyección de fluidos, mediante el análisis de variaciones entre secciones sísmicas en lapsos de tiempo
Authors Oriolson Rodriguez, Oscar Estevez and Nelson QuinteroEl avance en los instrumentos de adquisición sísmica y las nuevas técnicas de procesamiento, ha hecho que la sísmica en lapsos de tiempo sea una herramienta de caracterización de yacimientos petrolíferos. Esta técnica integrada a la simulación de yacimientos es útil en la evaluación de procesos de drenaje, de inyección de fluidos, ajuste histórico de modelos de simulación y a nivel diseńo de la sísmica la evaluación de parámetros de adquisición. Por tanto el modelamiento sísmico mediante la generación de sismogramas sintéticos sobre modelos de simulación es una buena práctica para evaluar la sensibilidad de la sísmica ante cambios de propiedades de roca y fluido. Para tal fin se usa modelos de simulación conceptuales generados en un simulador de yacimientos (CMG), del cual se extraen variables petrofísicas y de producción en la dirección de la línea de adquisición tomada para diferentes tiempos. Posteriormente mediante el uso de un modelo de sustitución de fluidos calculamos las velocidades de onda P y S y las densidades equivalentes para cada tiempo. Estas variables son ingresadas como parámetros a un software de modelamiento de la ecuación de onda completa en 2D (TESSERAL-PRO). Como resultado se obtendrá sismogramas 2D para cada tiempo seleccionado. El resultado de la resta de secciones sísmicas se asociara a los cambios en las saturaciones tanto de los fluidos in-situ como los inyectados. Con la información adquirida se evaluara contactos de fluidos, frentes de avance, rutas preferenciales del flujo y la resolución sísmica ante variaciones de los parámetros de adquisición.
-
-
-
Relación de la Variación Composicional y Textural Versus Elementos Depositacionales en los Conglomerados Basales de la Formación La Paz, Sinclinal de Nuevo Mundo, Valle Medio del Magdalena
Authors Aura Mejía, Daren Rodriguez, Pedro Gomez and Jorge RubianoComo parte del análisis de la correlación de los denominados conglomerados basales de la Formación La Paz se realizó un estudio sedimentológico y composicional de estas rocas en el Sinclinal de Nuevo Mundo en la cuenca Valle Medio del Magdalena. Se estudiaron 8 afloramientos, en los cuales se analizaron facies y se realizo un conteo de clastos para determinar la textura, la forma y la composición de los clastos mediante diagramas estadísticos para conocer la relación entre los conglomerados del flanco Este y Oeste del Sinclinal. Se identificaron 12 facies generalmente gravosas propias de un ambiente de ríos trenzados gravosos profundos. Exceptuando algunas asociaciones faciales que indican un ambiente de llanura de inundación. La distribución de las formas muy laminares (menos esféricas y redondeadas) tienden aumentar hacia el SW, donde se ubican las facies más gruesas. Las formas laminares (esfericidad intermedia), se presentan en mayor proporción al W y su contenido disminuye al NE- SE. Las formas compactas (más esféricas y redondeadas), tienden aumentar hacia el E y SE. La distribución de las guijos muy gruesos muestran una tendencia en la disminución del tamańo de grano hacia el NE y el espesor de facies conglomeráticas tiende aumentar hacia el SW y NE. En cuanto a la composición de los conglomerados se puede decir que es similar en todos los afloramientos a lo largo del sinclinal. Estas tendencias observadas son un indicador muy importante para los comienzos depositacionales de la Formación La Paz en este sector.
-
-
-
High resolution imaging for subtle geological features in the Llanos basin
Authors Paul Cunningham, David Behrman and Michael SmithWe demonstrate in a seismic processing project from the Llanos basin in Colombia that increasing bandwidth prior to migration can improve the spatial (lateral and vertical) resolution and the subsequent velocity analysis can produce a more detailed velocity profile which in turn improves image quality. The increase in bandwidth prior to migration reduces both vertical and lateral wavelet widths and, thus, increases spatial resolution. The improved spatial resolution in turn permits a more detailed velocity field to be defined both laterally and vertically. This approach, bandwidth expansion prior to migration, can be applied to both time and depth migration flows. We apply the high resolution imaging technique to the relatively thin Oligocene to Early Miocene Carbonera sandstones from the Llanos basin. Traps are typically three-way structural closures bounded by faults with relatively small throws. Using the highresolution imaging, the thin sands, their lateral pinchouts and the fault locations can be more accurately mapped reducing exploration risk.
-
-
-
Aplicación de la Geología de Campo en la Evaluación del Potencial Exploratorio: Cuencas Huallaga – Santiago (Onshore Perú)
Authors Walther León, Gonzalo Zamore and José María GonzalesEn el presente documento presentamos un caso de aplicación importante de la Geología de Campo en un área de exploración ubicado en una zona remota de selva, donde el acceso es muy difícil y la logística muy costosa, adicional a esto se tiene una normativa ambiental muy rigurosa y una relación con comunidades nativas muy complicada, esto ha hecho el proceso de adquisición de datos especialmente difícil y costoso. El área propiamente explorada no cuenta con información sísmica 2D, tan solo se han reprocesado 1,282 Km. de líneas sísmicas que desafortunadamente están fuera del área de interés. Geológicamente este proyecto corresponde a una zona de faja plegada con una complejidad estructural y estratigráfica alta. Esta situación nos ha llevado a utilizar todas las herramientas disponibles de la Geología de Campo para la integración de los datos e interpretaciones utilizando la tecnología disponible en el mercado en el campo del modelado geológico. Se desarrollaron numerosas campañas de geología de superficie compilando datos estructurales y estratigráficos en detalle y cargados finalmente en un proyecto ARCGIS generando mapas y secciones geológicas. Adicionalmente la información de la geología de superficie se integro con imágenes DEM texturizada con el mapa geológico generado.Con el conjunto de datos e interpretaciones cargadas en el software se realizó el trabajo del modelo estructural – estratigráfico (zonas triangulares y dúplex) para una estructura compleja en faja plegada, soportado esencialmente con los datos de la geología de superficie. En muchas ocasiones, las cuencas de frontera disponen de poco datos de subsuelo y este suele encontrarse espaciado y ser de mala calidad. Esto hace que la información de superficie adquiera una gran importancia, siendo en muchos casos, la única disponible. La calidad y confiabilidad de los datos son fundamentales a la hora de realizar una correcta interpretación que permita estimar el verdadero potencial de una zona y eventualmente proponer continuar con los trabajos exploratorios. Las cuencas de frontera de Huallaga y Santiago se encuentran en una zona de faja plegada, en un ambiente de selva alta con accesos y logística muy complicada y costosa, adicional a esto se tiene una normativa ambiental muy rigurosa y una relación con comunidades nativas muy complicada. El área propiamente explorada no cuenta con información sísmica 2D
-
-
-
Seismic attributes on frequency-enhanced seismic data
Authors Chopra Satinder and Kurt MarfurtSeismic data are usually contaminated by both random and coherent noise, even when the data have been migrated reasonably well and are multiple-free. Seismic attributes are particularly effective at extracting subtle features from relatively noise-free data. Certain types of noise can be addressed by the interpreter through careful structure-oriented filtering or post migration footprint suppression. However, if the data are contaminated by multiples or are poorly focused and imaged due to inaccurate velocities, the data need to go back to the processing team to alleviate those problems. Another common problem with seismic data is their relatively low bandwidth. Significant efforts are made during processing to enhance the frequency content of the data as much as possible to provide a spectral response that is consistent with the acquisition parameters. The interpreters will have a better understanding of the geology, the play concept, access to any well data, and therefore be better able to keep or reject alternative filter products that are consistent or inconsistent with the interpretation hypothesis. We begin our discussion by reviewing alternative means of suppressing random noise on our migrated seismic images, with the most promising methods being various implementations of structure-oriented filtering. Next, we address acquisition footprint, which may appear to be random in the temporal domain but is highly correlated to the acquisition geometry in the spatial domain. After running the data through the cleaning phase, we evaluate alternative methods for frequency enhancement of the input seismic data. We conclude with a summary on the choice of the frequency-enhancement methods on the basis of the examples generated with different workflows.
-
-
-
Volume co-rendering of seismic attributes - a great aid to seismic interpretation
Authors Chopra Satinder and Kurt MarfurtTraditional three-dimensional seismic interpretation was built on 2D work flows and consisted of interpreting a grid of inlines and crosslines from 3D seismic volumes. Such interpretation does not account for the information that exists in the third direction. Besides, conventional seismic amplitude visualization may not display subtle features such as identification of minor faults and thin sands, for which seismic attributes have been designed to enhance one or more components of seismic amplitude such as phase and structural relationships. Significant efforts in the last few years have shown the advantages of interpretation on time and horizon slices, geobody detection as well as multivolume and multiattribute co-rendering. Beginning with the early methods using directional illumination for enhancing subtle fault edges, followed by methods using false-color image techniques (RGB) for merging spectral components, we discuss with the help of examples the need for visualization of seismic attributes using volume co-rendering, keeping in mind the objectives of integration of data and value addition in interpretation. 3D visualization capability when adopted for seismic data interpretation can be a powerful tool that could integrate the different types of data. In addition to seismic data, well log curves (vertical and horizontal), VSP data (2D and 3D), microseismic data, all brought together in a 3D viewer not only provide a convincing visual corroboration of the available data, but also lends higher level of confidence to the interpreter. The future visualization development will be aimed at integrating multi-disciplinary data, which is what is required for meaningful reservoir characterization. The future in visualization is expected to offer unprecedented capabilities which will continue to amaze us.
-
-
-
Volumetric estimates of seismic reflector rotation and convergence
Authors Chopra Satinder and Kurt MarfurtGeometric attributes such as coherence and curvature are commonly used for mapping structural deformation and depositional environment. Although they are excellent at delineating a subset of seismic stratigraphic features (such as shale-dewatering polygons, injectites, collapse features, mass transport complexes, and overbank deposits) they have only limited value in imaging classic seismic stratigraphy features such as onlap, progradation and erosional truncation. We examine how the newer volumetric attributes can facilitate and quantify the use of seismic stratigraphic analysis workflows to large 3D seismic volumes. Due to the distinct change in reflector dip and/or terminations, erosional unconformities and in particular angular unconformities are relatively easy to recognize on vertical seismic sections. Although there will often be a low-coherence anomaly where reflectors of conflicting dip intersect, these anomalies take considerable skill to interpret. Application of attributes based on the description of seismic reflection patterns can be used to map angular unconformities amongst other features. The convergence/divergence of reflections can be defined by computing the vertical derivative of apparent dip at a userdefined azimuth, and have been extended to 3D reflector convergence azimuth and magnitude estimates. Compressive deformation and wrench faulting cause the fault blocks to rotate. The extent of rotation depends on the size, the comprising lithology and the stress levels. Fault block rotation can also control depositional processes by providing increased accommodation space in subsiding areas and erosional processes in uplifted areas. In view of this importance of the rotation of the fault blocks, we present a seismic attribute that measures the reflector rotation at every sample in the seismic data volume. Application of the reflector convergence and rotation about the normal attributes on two different 3D seismic volumes from Alberta, Canada yields convincing results.
-
-
-
Euler curvature for observing fracture lineaments
Authors Chopra Satinder and Kurt MarfurtOver the last several years, seismic curvature attributes have been shown to be very useful in the interpretation of flexures and folds which can often be associated with conjugate faults and fractures. Although many curvature measures that have been introduced, we find the most-positive and most-negative principal curvatures k1 and k2 to be the most useful. All other curvature attributes can be derived from the two principal curvatures. For example, some practitioners have found that the components of apparent curvature projected parallel to the dip azimuth and strike of a dipping plane to be useful in given tectonic and stress settings. In this study we describe the theory and application of Euler curvature, which is a generalization of the dip and strike components of curvature in any user-defined direction. Since reflector dip magnitude and azimuth can vary considerably across a seismic survey, it is more useful to equally sample azimuths of Euler curvature on the horizontal x-y plane, project these lines onto the local dipping plane of the reflector, and compute Euler curvature along a given strike direction. The Euler curvature attribute has the advantage that it can be computed from the conventional final migrated stacked volume to obtain the attributes in different azimuthal directions. In this manner, azimuthally-dependent lineament intensity volumes can be correlated to natural and induced fractures seen in image logs to better quantify the presence of natural fracture sweet spots perpendicular to today’s minimum horizontal stress field. We describe the application of Euler curvature to two different 3D seismic volumes from northeast British Columbia, Canada and show that this attribute is useful for the interpretation of lineament features in desired azimuthal directions.
-
-
-
Non-hyperbolic MultiFocusing improves depth imaging
Authors Alex Berkovitch, Kostya Deev, Marianne Rauch-Davies and Evgeny LandaMultiFocusing technology can dramatically improve the quality of seismic imaging especially in cases of low fold data, poor signal- to- noise ratio and sparse 3D acquisition. At the same time, local parameters of the observed wavefield in prestack seismic records are of great interest for many seismic applications such as signal enhancement, velocity model building, etc. We propose to employ the MultiFocusing idea to achieve this goal. A local common offset MultiFocusing approximation for travel time stacking surface description is used. It allows accurately approximate travel times of reflection events in the vicinity of arbitrary location and arbitrary offset. We present the implementation of two applications: a signal enhancement scheme and velocity model construction by prestack stereotomography. We will also demonstrate efficiency of the proposed applications.
-
-
-
Modelo tectónico regional sector sur de la cuenca caguán, basado en datos aergeofísicos y morfoestructurales
Authors Isabel Restrepo-Correa and Eduard LópezEl sector Sur de la Cuenca de Caguán se caracteriza por su inaccesibilidad, poco conocimiento geológico y ausencia de datos sísmicos. Basados en la escasa información existente, la región ha sido considerada como una extensión del escudo Brasilero, afectado por una tectónica preMesozoica, con sistemas de horst y grabens con rumbo general NNW. Sin embargo, nuevos datos aerogeofísicos adquiridos por ECOPETROL (5000 km/lineales de aerogravimetría-magnetometría), sumado al análisis de dinámica fluvial basado en imágenes de satélite, permiten postular la existencia de estructuras transversales con rumbo NWW, estructuras circulares y domos. Por otro lado, el modelamiento de métodos potenciales, permitió estimar que el área es un depocentro con espesor del orden de 4 a 6 km, que se extiende en forma elongada hacia el Sur a las provincias petrolíferas de ITT (Itspingo, Tambococha y Tiputini) en Ecuador. A partir del análisis regional, se plantea que la estructuración trasversal observada está genéticamente relacionada a la expulsión del bloque Norandino durante el Neogeno y que probablemente ha permitido la formación de estructuras prospectivas terciarias de hidrocarburos en el área. Está aún por definir la edad de las rocas más antiguas que rellenaron los depocentros y sus propiedades como almacenador y sello.
-
-
-
Geophysical expression of Late Oligocene-Early Miocene Reservoirs in the Guarrojo area, Llanos Basin of Colombia: from reconnaissance to simultaneous 3D seismic inversion
Authors M. De Freitas, I.C. Flores and J.A. MoraThe Guarrojo block, in the Llanos Basin of Colombia, is a case history of successful exploration where geophysical tools were progressively used from regional, reconnaissance work through to prospect definition, field development and further exploration. Prospective areas were identified with coarse airborne gravity-magnetics and 2D seismic (2005-2006). The first well (Ocelote-1, 2007) resulted in a significant oil discovery in sandstones of the Oligocene Carbonera (C7) Formation. The Ocelote field is currently producing 20,000 bopd, with significant untested potential. Two 3D seismic surveys covering 378 km2 were acquired (2007, 2009) and merged. Seismic interpretation and attribute analyses of pstm and psdm volumes were used for field appraisal and development. In addition, amplitude anomalies and coherence patterns suggested narrow, low sinuosity channels as upside potential in the Carbonera C5 member. The first C5 channel drilled in 2008 resulted in a significant oil discovery. Simultaneous 3D seismic inversion (P-S impedance) allowed for improved characterization of the C7 reservoir, but no fluid discrimination. Nevertheless, the inversion yielded improved estimation of both rock and fluid types of the overlying C5, C3 and C1 members. Sand-prone C5 channels were mapped with enhanced detail and P-S impedance cross-plots potentially discriminate water vs. oil bearing zones. Inversion prediction of oil pools failed in the first new well. Further to a new 3D acquisition and merge (2010), a feasibility analysis including more wells still suggests the power to discriminate fluids. Upon completion of a new run of the simultaneous inversion, additional C5, C7 prospects will be ranked and tested.
-
-
-
Characterization of the Ciénaga de Oro Formation in the Saman Block, Lower Magdalena Basin, Colombia, using 3D Seismic Inversion and Facies Analysis
Authors M. De Freitas, V.R. Vélez, A. Mesa and J.A. Mora3D seismic-based lithologic characterization of the Oligo-Miocene Cienaga de Oro Formation (COF) was performed in a ~500 sqkm area (Saman) of the Lower Madgalena Basin, Colombia. Facies variations and discontinuities of the COF make the reservoir distribution and quality the critical exploration risk in the basin. The study integrates seismic attributes, facies analysis and inversion (P-impedance), calibrated to 7 wells. The COF overlies an igneous-metamorphic basement, which forms a high amplitude seismic reflector. Both the top and the internal character of the COF present variations across the area. These reflect lithologic changes that can be recognized to some extent with amplitude and other seismic attributes from the pstm volume. However, a significant improvement in the characterization of the COF was obtained with 3D acoustic inversion and seismic facies analysis. The P-impedance volume allowed for an improved discrimination of different depositional events, interpreted as transgressive deposits advancing SE-wards. The basal section, with a very high P-impedance response, is restricted to the northern area and correlates with immature, coarse-grained deposits with poor reservoir properties. The upper section shows a discontinuous distribution of sandstones (exploration target) and shales, with the sand-prone facies correlating to moderate-high P-impedance and the shales to lowest values. Seismic facies analysis, where the variations of the wave form between top and base of the COF were subdivided into eight discrete responses, was performed both in unsupervised mode and constrained by wells. This helped further discriminating prospective (sand-prone) and non-prospective zones (shales or tight sands / conglomerates).
-
-
-
Descubrimiento del Campo Perla: Un Nuevo Campo Gigante en El Mar Caribe
El campo Perla se encuentra localizado en el Golfo de Venezuela, al occidente de la Península de Paraguaná a una profundidad de 60 m de agua. El yacimiento se sitúa en un área de interacción entre las Placas Caribe y Suramericana, las cuales generan un escenario geológico único y complejo. Los análisis preliminares de sísmica 2D mostraron un alto importante de ~100 km² que motivó al consorcio Repsol-eni a ofertar por el área Cardón IV, durante la Ronda Licitatoria de Gas “Rafael Urdaneta”. Tras la adjudicación del Bloque, se adquirieron más de 700 km² de sísmica 3D que reconfirmaron dos posibles zonas de interés, se caracterizó la primera como Carbonato Superior y la segunda como Carbonato Inferior. El Carbonato Superior cambiaba lateralmente a una unidad más siliciclástica y el Carbonato Inferior se identificó como una construcción carbonática (buildup), sin reflectores internos y con un “dim-spot” claro en el tope de la estructura, con más espesor y potencial. Los cálculos originales estimaron entre 2-6 TCF con un riesgo asociado principalmente al reservorio. El primer pozo exploratorio se perforó a mediados de 2009 (Perla-1X) y probó el Carbonato Inferior de edad Mioceno Inferior como gasífero con un espesor mayor de 240 m. Los estudios detallados identificaron un banco de algas rojas con macroforaminíferos asociados, desarollado en una rampa distalmente acentuada. Posteriormente, se identificó que la estructuración original del basamento definió los ambientes deposicionales. Los siguientes 4 pozos perforados confirmaron el descubrimiento como el mayor campo de gas de Latinoamérica.
-
-
-
Structural Linking of the Recetor and Piedemonte Areas, and Implications for Hydrocarbon Accumulations, Eastern Cordillera, Colombia
Authors David Richards and Claudia CeballosThe frontal zone of the Eastern Cordillera fold and thrust belt hosts the large fields of Cusiana and Cupiagua that have a long history of production, and as well, there is newer production from thrust sheets to the northeast, in the Recetor, Piedemonte and Niscota blocks (1, 2, 3). The area is structurally complicated and good seismic imaging has proven difficult to obtain in the areas northeast of the Cupiagua-main Recetor structural complex. Effective exploration and development rely on a detailed structural modeling workflow of 2D and 3D balancing, based heavily on well data, in order to achieve a structurally valid 3D seismic interpretation. Drilling based on the resulting 3D structural model has proven successful. The focus of this paper is the structural transition from the main Recetor area to the Piedemonte area. The structural style and trend of the productive and prospective thrust sheets change from the Recetor area to the Piedemonte area. In the main Recetor area, there is one primary producing thrust sheet with limited stacking of the Mirador and other reservoir units. In contrast, from northern Recetor through the Piedemonte area and continuing into the Niscota area there are stacked sheets of the producing reservoirs, with the sheets increasing in number to the northeast, corresponding to increased shortening in the northeastern part of the area in discussion. The overlying Nunchia syncline reflects the change in style and aids in interpretation of the deeper structure. The change in trend and slip direction relates to an area with slight alongstrike shortening, and this component of shortening contributes to development of culminations along strike. The structural modeling has resulted in identification of several opportunities in the area, as well as providing a guide to well planning and reserve estimations.
-
-
-
National Geoscience Laboratory Network – RNLG
More LessIn many industrialized and developed countries, universities play a key leadership role in academic, research and innovation processes. The Colombia Hydrocarbon Agency (ANH) and the Colombia science foundation (COLCIENCIAS) created an initiative to develop a national Geoscience Laboratory network (RNLG). The RNLG is a technical system that integrates several laboratories belonging to twelve public and private institutions in the field of Geosciences, including universities (EAFIT, UCALDAS, UIS, UNAL, UNIANDES, and UPTC), private institutions (ICP) and public institutions (Colombian Geologic Survey and the Geographic Agustin Codazzi Institute). The integration of these entities allows the RNLG to develop technologies and applications in high priority earth science areas including regional geological analysis, thermocronological, paleomagnetic, bioestratigraphic, and geochemical studies, and remote sensing techniques. The RNLG´s mission is focused on establishing and consolidating high quality laboratories for teaching, research and extension, which in turn generates strategic alliances among its members, government and industry, for the understanding and evaluation of conventional and unconventional hydrocarbon resources, in order to reduce uncertainty in decision-making in the development of the hydrocarbon sector. This will be reflected in encouraging private investment in the exploration and exploitation of hydrocarbons in the country.
-
-
-
Integrating coherence and seismic inversion for imaging thin bed channel deposits
Authors Carlos Molinares, Richard Brito, Oswaldo davogustto and Kurt MarfurtThis paper describes the advantages of combining energyweighted coherent amplitude gradients, coherence and seismic inversion cubes, for imaging thin bed deposits. These features are related to distributary channel deltaic deposits associated with a transgressive Lower Miocene sequence, located in northwestern Colombia (South America). Because the rapid lateral variations and thickness below tuning resolution, these transgressive channel reservoirs are complicated to develop efficiently and it is difficult to characterize or successfully map them using conventional seismic attributes (e.g. RMS amplitude). Our coherence and energy-weighted coherent amplitude gradients volumes provides high resolution images of lateral variations within the seismic volume, illuminating channels and faults but provide little insight as to which seismic facies may be present. In contrast, our seismic inversion volumes is directly sensitive to lithology and porosity; when coupled with well control it can be used for lithologic and stratigraphic interpretations. These volumes present an unbiased image volume that allow interpreters and reservoir engineers to: 1) display stratigraphic geobodies, 2) compare producing intervals, and 3) predict reservoir continuity for an integrated reservoir characterization.
-
-
-
Geometric Seismic Attributes for Imaging High Angle Faults and Thin Beds in the Magangue High, Northwestern Colombia
Authors Carlos Molinares, Kurt Marfurt and Victor RamirezNew natural gas discoveries in the Magangue High (Northwestern Colombia) brings new exploration opportunities but also new challenging conditions in an underexplored area. The principal reservoir is related to the Lower Miocene transgressive sandstones (Cienaga de Oro Formation), characterized by a high-energy well-connected marginal marine channel system that ended isolated thin tidal channels. The secondary reservoir is related to early Late Miocene Basal Porquero Formation turbidite sandstones. These two intervals are limited by normal faults, which both generate trap and compartmentalize the reservoir. The first objective of this work was to better map high-angle faults. Seismic attributes such as eigenstructure coherence are sensitive only to waveform changes while others such as Sobel filters and variance are sensitive to both waveform and amplitude changes. In contrast, attributes such as the most-positive and most-negative principal curvatures are sensitive to more diffuse fault zones that appear as flexures. The second objective was to apply geometric seismic attributes sensitive to amplitude changes to image channel features with thickness possibly below tuning resolution. Applying this workflow are able to image thin tidal channels and sand flats that give rise to amplitude changes. We interpret the amplitude contrast between channel infill and surrounding matrix as representing more sandy intervals. We interpret other channels as filled with clay plugs, with reservoir characterization consequences. Co-rendering coherence attributes combined with the principal curvatures were effective in mapping normal faults in the Magangue Arc, key to reservoir characterization and well planning phases.
-
-
-
Advances in acquiring real-time data using wireless technology
Authors Doug Crice, Roy Kligfield and William ScottLand seismic acquisition has traditionally relied on the use of cables to power the acquisition instruments and to transport the seismic data to a central recorder. However, the logistical issues relating to the use of cables to connect acquisition instruments is a serious handicap. The problems of deploying and maintaining cabled networks, relocating cables in order to move the spread, and repairing cables have acted as constraints on the growth in size and scope of land seismic acquisition projects worldwide. In the recent past, two approaches are being adapted in order to overcome these barriers. In athe first approach, instruments are being deployed as autonomous “blind” nodes whose data has to be collected and transcribed in order to make it ready for processing. In a new approach, instruments are being deployed with the capability to wirelessly transport the seismic data to a central location in real time. Whereas the nodal approach has been successful at eliminating the use of cables, it introduces the need to visit the instruments physically to collect (harvest) the data from the instruments and to prepare the downloaded data (transcription) for input into industry standard formats. The nodal approach precludes any chance of viewing the seismic data immediately. This presentation reviews the initial results of field deployments using a system with realtime wireless data collection, usable in both remote and urban environments. A review of some of the system capabilities and limitations in terms of network throughputs, radio interference issues in urban environments, and the use of different sources will be given. Based on its initial deployments, the solution is entirely capable of being scaled up to support the large channel counts demanded in land seismic operations.
-
-
-
Effects of Paleogene Subduction on Basin Segmentation and Oil Migration in NW South America
Authors German Bayona, Agustin Cardona, Carlos Jaramillo, Camilo Montes and Andres MoraIn the Northern Andes, inversion of Mesozoic extensional structures controlled location of synorogenic successions, dispersal of detritus and migration pathways since Paleocene time. Detailed tectonostratigraphic analysis conducted in several basins of NW South America indicate that reactivation of former normal faults broke the single Late Cretaceous basin into different depocenters. In the Paleocene to early Eocene, reverse reactivation broke the syn-orogenic basin into two depocenters. The western depocenter (Magdalena and Rancheria basins) was bounded to the west by eastward-tilted crustal blocks and to the east by reactivated structures; crustal tilting and Paleocene marginal and intraplate magmatism were associated to subduction of the buoyant Caribbean plate. Reactivation of older structures migrated eastward and disrupted the eastern depocenter (presently along the axial zone of the Eastern Cordillera, Llanos foothills, Llanos, Catatumbo and western Maracaibo basin). Basin configuration and patterns of deformation changed drastically in middle Eocene time, as subduction of the buoyant Caribbean plate stopped. Strike-slip deformation and localized burial process that favored for oil maduration along western depocenters (southern and middle Magdalena Valley) depict marginal deformation associated to northward migration of the Caribbean plate,. In contrast, quiescence in eastern depocenters favored deposition of reservoir units. As subduction process renewed in Oligocene time, deformation spreadout. The uplift of the bivergent Eastern Cordillera broke definitively the connection of eastern and western depocenters, and began the segmentation of the Llanos basin from the axial zone of the Eastern Cordillera.
-
-
-
High Dimensional Interpolation and Regularization in Exploration
Authors Jaim Stein and Robert WojslawRegularization and Interpolation in higher dimensions has become an important tool in the processing arsenal of any geophysicist. The reasons for interpolation and regularization of data are many. Some noise elimination techniques work better on regular data sets and some even demand it. Also imaging algorithms, whether it is Prestack Time or Prestack Depth migrations produce better results if the data has been regularized a priori, than during the migration, putting less demand on the migration weights, which are, in general still poorly understood.
-
-
-
3D SEISMIC ANALYSIS OF SEDIMENTARY DYNAMICS CONSIDERING THE GELASIAN-CALABRIAM CLIMATE TRANSITION FROM LATE PLIOCENE TO PRESENT, AN EXAMPLE OF THE EBRO CONTINENTAL MARGIN
Authors Adriana Grosso and Angelo CamerlenghiAnalysis of industry 3D seismic reflection data on the Ebro continental margin was analized to better understand the evolution of the sedimentary dynamics of the Ebro margin shelf from late Pliocene to present, considering the Gelasian-Calabrian boundary transition from a climate dominated by 41 ka Earth precession cycles to 100 ka obliquity of the Earth’s orbit dominated cycles.
-
-
-
Dual coil – long offset full azimuth towed streamer acquisition
Authors Tim Bunting, Tim Brice and Nick MoldoveanuOver the last twelve years significant advances have been made to mitigate for the limited azimuth range of towed streamer geometries and subsequently improve imaging in areas of high geological complexity, such as the Gulf of Mexico pre-salt provinces. These advances include acquiring the survey multiple times in different azimuths (MAZ) and acquiring the survey using multiple vessels (WAZ). More recently Coil Shooting has been deployed which utilizes a single towed streamer vessel following a circular pre-plot. However, even with these sophisticated surface geometries, recent experience has shown that the most complex of Gulf of Mexico geologies are still non-optimally imaged. Through a series of modeling efforts, using ray tracing and two-way wave equation methods, the WesternGeco technical team in Houston determined that to solve these most complex imaging problems a ultra-long offset full azimuth measurement was required. The same technical team used these new geometry requirements to develop a new acquisition technique of which Dual Coil is the result. The Dual Coil technique uses four vessels (two recording vessels and two source vessels), sailing in 12.5-km-diameter slightly offset circles. The source vessels sail at the tail of the respective recording spreads and the two recording vessels maintain 180 degrees separation. Ultra-long offsets are achieved by sources shooting across the coil (Moldoveanu and Kapoor 2009; Brice 2011). These circular “lines” are repeated in both directions to build up fold, offset distribution and azimuth distribution. At the time of writing, three dual coil surveys have been acquired in the Gulf of Mexico covering over 550 OCS blocks (13,000km 2). Each with different acquisition and imaging challenges. The final images will take over a year to complete using an intensive data processing flow including variable water velocity correction, 3D Surface Related Multiple Attenuation (SRME) and tilted transverse isotropy model building and imaging. However fast track images were generated on-board and delivered less than a week after completion of acquisition operations. Even using this preliminary model and Isotropic assumptions there is a clear improvement in imaging, when compared to the underlying WAZ image. As well as a general improvement in illumination and signal to noise, the sand beds terminating against the salt body are much easier to interpret. While the Dual Coil technique has been developed to solve specific imaging problems in the Gulf of Mexico associated with large complex salt bodies, there is no reason to think that it would not be appropriate for other difficult-to-image areas around the world such as where thick layers of basalt are present or where carbonate layers distort the ray-paths.
-
-
-
Point source and point receiver acquisition – potential benefits for columbia
By Tim BuntingWhile land point source and point receiver acquisition is gaining acceptance in certain regional and geological settings its uptake in Latin America has been limited. Historically the industry has tried to solve the problems of surface noise on land seismic surveys by increasing source and receiver effort by using large arrays and by sending lots of signal energy into the ground. Point source and receiver techniques attempt to resolve the problems associated with the complex noise field on land surveys in a more scientific way, by measuring the linear noise modes as faithfully as possible i.e. un-aliased or not disturbed by the use of geophone arrays. In 2007 WesternGeco acquired a point receiver 2D survey at the base of the Al-Hajar mountain range close to Dubai in the UAE at the edge of the Oman thrust belt. The geology is very complex with steeply dipping structure. The survey was acquired on top of a 2003 3D survey out the two acquisitions used radically different approaches, some of which are detailed in table 1. In addition to the use of point receivers and compact source groups, the bandwidth of the sweep was extended at the low end. The final 2007 PSDM images showed significant uplift above the 2003 PSTM processing. The signal to noise is much better, to the point where it is possible to interpret the structural geometry with some level of confidence. It is difficult to draw absolute conclusions when comparing the 2003 time image with the 2007 depth image because of the use of a depth imaging solution. However, the uplift in the pre-imaging measurement will not only benefit the imaging solution but all additional processes, most specifically the velocity modeling which is critical to the depth imaging effort. The combination of all these incremental uplifts can result in significant overall improvement in imaging quality.
-
-
-
Advances in marine seismic acquisition
Authors Thomas Elboth, Hakon Aune, Eric de Graaff, Margherita Maraschini and Steve ColeLong offset wide azimuth seismic, simultaneous sources (blended acquisition) and ocean bottom nodes are technologies that have been developed in order to fulfill the goals of faster, cheaper and better seismic. In this paper we will present results from recent field tests where we have combined several of these technologies. New and improved hardware makes it possible to control the positions of both sources and streamers with very high (decimeter) accuracy. With recent engineering and processing algorithm advances, it is also possible to acquire blended data (i.e., firing sources at multiple shot locations within a single seismic record), and deblend the data efficiently. By combining source and streamer steering with blended acquisition, we can choose to double the cross-line sampling of 3D and 4D surveys, or acquire extra azimuths (WAZ) without the need to reduce in-line sampling, all in the same time it would take to acquire a conventional survey. By combining these techniques with advanced tools like Fresnel zone binning, we can also significantly reduce the need for infill shooting. In short, we get data faster, cheaper and better. The use of simultaneous sources also offers exciting opportunities when combined with ocean bottom nodes. The extra source(s) efficiently contribute to a higher trace count or reduced acquisition time. De-blending, i.e. the technology of separating data coming from several sources is a key software component in all of these approaches.
-
-
-
Expanding the role of cable-less equipment in seismic operations
By J. CrissCable-less technology for seismic acquisition has evolved and grown over the last few years. As of Jan 2012, it is estimated that there are over 170,000 cable-less seismic acquisition nodes at work worldwide on over 40 systems. Cable-less seismic equipment poses new challenges in operations, not because it is more difficult to use but because the systems require crews to learn new skill sets and view equipment optimization in a new light. Experience is growing with cable-less systems in the fields of improving operation efficiency, designing more flexible surveys, and meeting tighter project management deadlines. The role of cable-less seismic acquisition equipment is expanding with increased confidence gained by successes in production work, leading toward a brighter future for cable-less seismic hardware systems. This paper will investigate the concerns surrounding system design, the benefits and trade-offs, and the critical factors that made cable-less systems the best solution for some recent successful projects.
-