Basin Research - Volume 26, Issue 4, 2014

Understanding the relationship between sedimentation and tectonics is critical to the analysis of stratigraphic evolution in foreland basins. Previous models of foreland basins have explained stratal development, but were done generally under the assumption that steady allogenic forcing produces a steady stratigraphic response. They did not consider autogenic shoreline behaviour during the development of the subsidence pattern characteristic of foreland basins. We present a mathematical model and flume experiments that explore how subsidence and sediment‐supply rates control the shoreline trajectory and the stratal patterns that fill foreland basins. Through these models, we found differing autogenic responses in the rate and direction of shoreline migration, and these generated three distinct styles of stratal architecture, despite the constant external forcing (i.e. constant sediment discharge and basin substrate tilting). The first response was ‘autoretreat’, where shoreline migration switched from initial progradation to retrogradation. The second response was progradation followed by constant aggradation of the shoreline. The third response was maintained progradation with a markedly accelerating rate. We termed this latter newly observed autogenic behaviour ‘shoreline autoacceleration’. These three modes of shoreline behaviour and their accompanying stratal architecture provide a basic framework for the relationship between sedimentation and tectonic activity in foreland basins under the simplified conditions presented here.

Within the interior of the Yangtze Craton, the dome‐like Huangling anticline exposes ca. 1000 km² of Archaean basement and Neoproterozoic granitoid rocks in the Three Gorges region, providing a natural laboratory for studying the mechanism of intracontinental exhumation. Cretaceous shortening of the Qinling Orogen and Cenozoic reorganization of the Yangtze River have been considered by previous thermochronology studies to account for the two‐phase exhumation of the Huangling anticline. However, little is known about when and how the batholithic rocks were exposed to the surface. To fully reveal the exhumation history of the Huangling anticline, we focus on the Cenozoic sedimentary record in the western Jianghan Basin, downstream of the Three Gorges, and examined spatio‐temporal changes in sedimentation dynamic and provenance on the basis of sedimentary facies, palaeocurrents and clast compositions, as well as zircon U‐Pb geochronology. Our results indicate continuous unroofing of the Huangling anticline since the Eocene and provide a solid evidence for first exposure of the Huangling batholith during the Neogene. Cenozoic exhumation of the Huangling anticline is synchronous with incision of the Three Gorges, indicating a mechanism of intracontinental exhumation due to Yangtze River reorganization through which the Middle Yangtze River was progressively captured by the Lower Yangtze River with locally increased erosion rates in the Three Gorges.

The impact of a pre‐existing rift fabric on normal fault array evolution during a subsequent phase of lithospheric extension is investigated using 2‐D and 3‐D seismic reflection, and borehole data from the northern Horda Platform, Norwegian North Sea. Two fault populations are developed: (i) a population comprising relatively tall (>2 km), N‐S‐striking faults, which have >1.5 km of throw. These faults are up to 60 km long, penetrate down into crystalline basement and bound the eastern margins of 6–15 km wide half‐graben, which contain >3 km of pre‐Jurassic, likely Permo–Triassic, but possibly Devonian syn‐rift strata; and (ii) a population comprising vertically restricted (<1 km), NW‐SE‐striking faults, which are more closely spaced (0.5–5 km), have lower displacements (30–100 m) and not as long (2–10 km) as those in the N–S‐striking population. The NW‐SE‐striking population typically occurs between the N‐S‐striking population, and may terminate against or cross‐cut the larger structures. NW–SE‐striking faults do not bound pre‐Jurassic half‐graben and are largely restricted to the Jurassic‐to‐Cretaceous succession. Seismic‐stratigraphic observations, and the stratigraphic position of the fault tips in both fault populations, allow us to reconstruct the Late Jurassic‐to‐Early Cretaceous growth history of the northern Horda Platform fault array. We suggest the large, N‐S‐striking population was active during the Permo–Triassic and possibly earlier (Devonian?), before becoming inactive and buried during the Early and Middle Jurassic. After a period of relative tectonic quiescence, the N‐S‐striking, pre‐Jurassic fault population propagated through the Early‐Middle Jurassic cover and individual fault systems rapidly (within <10 Ma) established their maximum length in response to Late Jurassic extension. These fault systems became the dominant structures in the newly formed fault array and defined the locations of the main, Late Jurassic‐to‐Early Cretaceous, syn‐rift depocentres. Late Jurassic extension was also accommodated by broadly synchronous growth of the NW‐SE‐striking fault population; the eventual death of this population occurred in response to the localization of strain onto the N–S‐striking fault population. Our study demonstrates that the inheritance of a pre‐existing rift fabric can influence the geometry and growth of individual fault systems and the fault array as a whole. On the basis of observations made in this study, we present a conceptual model that highlights the influence of a pre‐existing rift fabric on fault array evolution in polyphase rifts.

We present tectonic models of progressive basin formation in the south‐west Barents Sea derived as part of the PETROBAR project (Petroleum‐related studies of the Barents Sea region). The basin architecture developed as a multi‐stage rift preceding the creation of the sheared/transtensional margin conjugate to NE Greenland. N‐ to NNE‐striking basins, with sediment thicknesses in places exceeding 15 km, are separated by basement highs. We use two basin analysis approaches, BMT™ backstripping and TecMod™time‐forward modelling, to determine stretching factors through time along the profile PETROBAR‐07. This 550 km‐long profile derived from wide‐angle reflection/refraction seismic data acquired in 2007, coincident with deep multichannel seismic reflection data. Detailed stratigraphic analysis of the reflection profile, in concert with a dense grid of 2D profiles tied to wells, provides timing and water depth constraint for the models. Velocity analysis of the wide‐angle data provides constraint on the cumulative crustal stretching. The north‐west trending cross‐section extends from continental craton, at the Varanger Peninsula, to within 16 km of the interpreted continent–ocean boundary. Rifting along the profile was episodic, with four distinct phases of basin formation during the Carboniferous, the Late Permian–Triassic, the Late Jurassic–Early Cretaceous and the Late Cretaceous–Eocene. Collectively, the basins exhibit a general trend of younging, narrowing, and deepening oceanward, suggesting a gradual focusing of rifting prior to final breakup. Cumulative stretching factors derived from BMT and TecMod correlate well with observed crustal thinning, and the two models provide uncertainty bounds for stretching factors for the separate rift phases. In contrast to orthogonally rifted margins, stretching is relatively minor immediately prior to transform breakup, with greater stretching occurring during earlier rift phases.

Axel Heiberg Island (Arctic Archipelago, northern Nunavut, Canada) contains the thickest Mesozoic section in Sverdrup Basin (11 km). The ca. 370‐km‐long island is second only to Iran in its concentration of exposed evaporite diapirs. Forty‐six diapirs of Carboniferous evaporites and associated minibasins are excellently exposed on the island. Regional anticlines, which formed during Paleogene Eurekan orogeny, trend roughly north on a regular ca. 20‐km wavelength and probably detach on autochthonous Carboniferous Otto Fiord Formation evaporites comprising halite overlain by thick anhydrite. In contrast, a 60‐km‐wide area, known as the wall‐and‐basin structure (WABS) province, has bimodal fold trends and irregular (<10 km) wavelengths. Here, crooked, narrow diapirs of superficially gypsified anhydrite crop out in tight anticline cores, which are separated by wider synclinal minibasins. We interpret the WABS province to detach on a shallow, partly exposed canopy of coalesced allochthonous evaporite sheets. Surrounding strata record a salt‐tectonic history spanning the Late Triassic (Norian) to the Paleogene. Stratigraphic thinning against diapirs and spectacular angular unconformities indicate mild regional shortening in which diapiric roof strata were bulged up and flanking strata steepened. This bulging culminated in the Hauterivian, when diapiric evaporites broke out and coalesced to form a canopy. As the inferred canopy was buried, it yielded second‐generation diapirs, which rose between minibasins subsiding into the canopy. Consistent high level emplacement suggests that all exposed diapirs inside the WABS area rose from the canopy. In contrast, diapirs along the WABS margins were sourced in autochthonous salt as first‐generation diapirs. Apart from the large diapir‐flanking unconformities, Jurassic‐Cretaceous depositional evidence of salt tectonics also includes submarine debris flows and boulder conglomerates shed from at least three emergent diapirs. Extreme local relief, tectonic slide blocks, steep talus fans and subaerial debris flows suggest that many WABS diapirs continue to rise today. The Axel Heiberg canopy is one of only three known exposed evaporite canopies, each inferred or known at a different structural level: above the canopy (Axel Heiberg), through the canopy (Great Kavir) and beneath a possible canopy (Sivas).

Regionally extensive 3D seismic data from the Lower Congo Basin, offshore Angola, have been used to investigate the influence of salt‐related structures on the location, geometry and evolution of Miocene deep‐water depositional systems. Isochron variations and cross‐sectional lap‐out relationships have then been used to qualitatively reconstruct the syn‐depositional morphology of salt‐cored structures. Coherence and Red‐green‐blue‐blended spectral decomposition volumes, tied to cross‐sectional seismic facies, allow imaging of the main sediment transport pathways and the distribution of their component seismic facies. Major sediment transport pathways developed in an area of complex salt‐related structures comprising normal faults, isolated diapirs and elongate salt walls with intervening intraslope basins. Key structural controls on the location of the main sediment transport pathways and the local interaction between lobe‐channel‐levee systems and individual structures were the length and height of structures, the location and geometry of segment boundaries, the growth and linkage of individual structures, and the incidence angle between structural strike and flow direction. Where the regional flow direction was at a high angle to structural strike, transport pathways passed progressively through multiple intraslope basins in a fill and spill manner. Segment boundaries and structural lows between diapirs acted as spill points, focusing sediment transport between intraslope basins. Channel–lobe transitions are commonly associated with these spill points, where flows expanded and entered depocentres. Deflection of channel‐levee complexes around individual structures was mainly controlled by the length of structures and incidence angle. Where regional flow direction was at a low angle to structural strike, sediment transport pathways ran parallel to structure and were confined to individual intraslope basins for many tens of kilometres. Spill between intraslope basins was rare. The relative position of structures and their segment boundaries was fixed during the Miocene, which effectively pinned the locations where sediment spilled from one intraslope basin to the next. As a result, major sediment transport pathways were used repeatedly, giving rise to vertically stacked lobe‐channel‐levee complexes along the pathways. Shadow zones devoid of coarse clastics developed in areas that were either structurally isolated from the sediment transport pathways or bypassed as a result of channel diversion.