- Home
- A-Z Publications
- Basin Research
- Previous Issues
- Volume 22, Issue 2, 2010
Basin Research - Volume 22, Issue 2, 2010
Volume 22, Issue 2, 2010
-
-
Influence of the mechanical behaviour of brittle–ductile fold–thrust belts on the development of foreland basins
More LessABSTRACTA two‐dimensional mathematical model considering coupling between a deforming elasto‐visco‐plastic fold–thrust belt, flexural subsidence and diffusional surface processes is solved using the Finite Element Method to investigate how the mechanical behaviour of brittle–ductile wedges influences the development of foreland basins. Results show that, depending mainly on the strength of the basal décollement, two end‐member types of foreland basin are possible. When the basal detachment is relatively strong, the foreland basin system is characterised by: (1) Highly asymmetrical orogen formed by thrusts concentrated in the incoming pro‐wedge. (2) Sedimentation on retro‐side takes place in one major foredeep basin which grows throughout orogen evolution. (3) Deposition on the pro‐side occurs initially in the foredeep, and continues in the wedge‐top before isolated basins are advected towards the orogen core where they become uplifted and exhumed. (4) Most pro‐wedge basins show an upward progression from low altitude, foredeep deposits at the base to high altitude, wedge‐top deposits near the surface. In contrast, when the basal detachment behaves weakly due to the presence of low viscosity material such as salt, the foreland basin system is characterised by (1) Broad, low relief orogen showing little preferential vergence and predominance of folding relative to faulting. (2) Deposition mainly in wedge‐top basins showing growth strata. (3) Many basins are initiated contemporaneously but form discontinuously due to the locus of active deformation jumping back and forth between different structures. Model results successfully reproduce first order observations of deforming brittle–ductile wedges and foreland basins. Moreover, the results support and provide a framework for understanding the existence of two main end‐member foreland basin types, simple and complex, associated with fold–thrust belts whose detachments are relatively strong and weak, respectively.
-
-
-
Provenance of siliciclastic and hybrid turbiditic arenites of the Eocene Hecho Group, Spanish Pyrenees: implications for the tectonic evolution of a foreland basin
Authors M. A. Caja, R. Marfil, D. Garcia, E. Remacha, S. Morad, H. Mansurbeg, A. Amorosi, C. Martínez‐Calvo and R. Lahoz‐BeltráABSTRACTThe Eocene Hecho Group turbidite system of the Aínsa‐Jaca foreland Basin (southcentral Pyrenees) provides an excellent opportunity to constrain compositional variations within the context of spatial and temporal distribution of source rocks during tectonostratigraphic evolution of foreland basins. The complex tectonic setting necessitated the use of petrographic, geochemical and multivariate statistical techniques to achieve this goal. The turbidite deposits comprise four unconformity‐bounded tectonostratigraphic units (TSU), consisting of quartz‐rich and feldspar‐poor sandstones, calclithites rich in extrabasinal carbonates and hybrid arenites dominated by intrabasinal carbonates. The sandstones occur exclusively in TSU‐2, whereas calclithites and hybrid arenites occur in the overlying TSU‐3, TSU‐4 and TSU‐5. The calclithites were deposited at the base of each TSU and hybrid arenites in the uppermost parts. Extrabasinal carbonate sources were derived from the fold‐and‐thrust belt (mainly Cretaceous and Palaeocene limestones). Conversely, intrabasinal carbonate grains were sourced from foramol shelf carbonate factories. This compositional trend is attributed to alternating episodes of uplift and thrust propagation (siliciclastic and extrabasinal carbonates supplies) and subsequent episodes of development of carbonate platforms supplying intrabasinal detrital grains. The quartz‐rich and feldspar‐poor composition of the sandstones suggests derivation from intensely weathered cratonic basement rocks during the initial fill of the foreland basin. Successive sediments (calclithites and hybrid arenites) were derived from older uplifted basement rocks (feldspar‐rich and, to some extent, rock fragments‐rich sandstones), thrust‐and‐fold belt deposits and from coeval carbonate platforms developed at the basin margins. This study demonstrates that the integration of tectono‐stratigraphy, petrology and geochemistry of arenites provides a powerful tool to constrain the spatial and temporal variation in provenance during the tectonic evolution of foreland basins.
-
-
-
3D seismic imaging of a Tertiary Dyke Swarm in the Southern North Sea, UK
Authors Mostyn Wall, Joe Cartwright, Richard Davies and Andrew McGrandleABSTRACTWe use three‐dimensional (3D) seismic reflection and magnetic data to interpret and describe the 3D geometry of igneous dykes in the southern North Sea. The dykes were emplaced into Paleozoic and Mesozoic sediments and have a common upper termination in Early Tertiary sediments. We interpret the dykes to be part of the British Tertiary volcanic province and estimate the age of the dykes to be 58 Ma. The dykes are characterized by a narrow 0.5–2 km wide vertical disturbance of seismic reflections that have linear plan view geometry. Negative magnetic anomalies directly align with the vertical seismic disturbance zones and indicate the presence of igneous material. Linear coalesced collapse craters are found above the dykes. The collapse craters have been defined and visualized in 3D. Collapse craters have formed above the dyke due to the release of volatiles at the dyke tip and resulting volume loss. Larger craters have potentially formed due to explosive phreatomagmatic interaction between magma and pore water. The collapse craters are a new Earth analogue to Martian pit chain craters.
-
-
-
The structural evolution of the Halten Terrace, offshore Mid‐Norway: extensional fault growth and strain localisation in a multi‐layer brittle–ductile system
Authors N. Marsh, J. Imber, R. E. Holdsworth, P. Brockbank and P. RingroseABSTRACTTectonic subsidence in rift basins is often characterised by an initial period of slow subsidence (‘rift initiation’) followed by a period of more rapid subsidence (‘rift climax’). Previous work shows that the transition from rift initiation to rift climax can be explained by interactions between the stress fields of growing faults. Despite the prevalence of evaporites throughout the geological record, and the likelihood that the presence of a regionally extensive evaporite layer will introduce an important, sub‐horizontal rheological heterogeneity into the upper crust, there have been few studies that document the impact of salt on the localisation of extensional strain in rift basins. Here, we use well‐calibrated three‐dimensional seismic reflection data to constrain the distribution and timing of fault activity during Early Jurassic–Earliest Cretaceous rifting in the Åsgard area, Halten Terrace, offshore Mid‐Norway. Permo‐Triassic basement rocks are overlain by a thick sequence of interbedded halite, anhydrite and mudstone. Our results show that rift initiation during the Early Jurassic was characterised by distributed deformation along blind faults within the basement, and by localised deformation along the major Smørbukk and Trestakk faults within the cover. Rift climax and the end of rifting showed continued deformation along the Smørbukk and Trestakk faults, together with initiation of new extensional faults oblique to the main basement trends. We propose that these new faults developed in response to salt movement and/or gravity sliding on the evaporite layer above the tilted basement fault blocks. Rapid strain localisation within the post‐salt cover sequence at the onset of rifting is consistent with previous experimental studies that show strain localisation is favoured by the presence of a weak viscous substrate beneath a brittle overburden.
-
-
-
Towards ground truthing exploration in the central Arctic Ocean: a Cenozoic compaction history from the Lomonosov Ridge
Authors M. O'Regan, K. Moran, C. D. P. Baxter, J. Cartwright, C. Vogt and M. KöllingABSTRACTThe Integrated Ocean Drilling Program's Expedition 302, the Arctic Coring Expedition (ACEX), recovered the first Cenozoic sedimentary sequence from the central Arctic Ocean. ACEX provided ground truth for basin scale geophysical interpretations and for guiding future exploration targets in this largely unexplored ocean basin. Here, we present results from a series of consolidation tests used to characterize sediment compressibility and permeability and integrate these with high‐resolution measurements of bulk density, porosity and shear strength to investigate the stress history and the nature of prominent lithostratigraphic and seismostratigraphic boundaries in the ACEX record. Despite moderate sedimentation rates (10–30 m Myr−1) and high permeability values (10−15–10−18 m2), consolidation and shear strength measurements both suggest an overall state of underconsolidation or overpressure. One‐dimensional compaction modelling shows that to maintain such excess pore pressures, an in situ fluid source is required that exceeds the rate of fluid expulsion generated by mechanical compaction alone. Geochemical and sedimentological evidence is presented that identifies the Opal A–C/T transformation of biosiliceous rich sediments as a potential additional in situ fluid source. However, the combined rate of chemical and mechanical compaction remain too low to fully account for the observed pore pressure gradients, implying an additional diagenetic fluid source from within or below the recovered Cenozoic sediments from ACEX. Recognition of the Opal A–C/T reaction front in the ACEX record has broad reaching regional implications on slope stability and subsurface pressure evolution, and provides an important consideration for interpreting and correlating the spatially limited seismic data from the Arctic Ocean.
-
-
-
Present‐day stresses in Brunei, NW Borneo: superposition of deltaic and active margin tectonics
Authors R. C. King, R. R. Hillis, M. R. P. Tingay and A.‐R. DamitABSTRACTThe Baram Delta System, Brunei, NW Borneo, is a Tertiary delta system located on an active continental margin. Delta top regions in many Tertiary delta systems (e.g. Niger Delta) are thought to exhibit a normal‐fault stress regime and margin‐parallel maximum horizontal stress orientations. However, unlike in passive margin Tertiary delta systems, two present‐day stress provinces have been previously identified across the Baram Delta System: an inner shelf inverted province with a margin‐normal (NW–SE) maximum horizontal stress orientation and an outer shelf extension province with a margin‐parallel (NE–SW) maximum horizontal stress orientation. Before this study, there were few data constraining the inverted province other than in the vicinity of the Champion Fields. New data from 12 petroleum wells in the western inner shelf and onshore west Brunei presented herein confirm the margin‐normal maximum horizontal stress orientations of the inverted province. A total of 117 borehole breakouts, all documented in shale units, and one drilling‐induced tensile fracture (in a sandstone interval) reveal a mean maximum horizontal stress orientation of 117 with a standard deviation of 19°. This orientation is consistent with contemporary margin‐normal maximum horizontal stress orientations of the inverted province described previously in the vicinity of the Champion Fields that have been linked to basement tectonics of the Crocker–Rajang accretionary complex and associated active margin. However, stress magnitudes calculated using data from these 12 petroleum wells indicate a borderline strike–slip fault to normal fault stress regime for the present day; combined with the absence of seismicity, this suggests that the studied part of the NW Borneo continental margin is currently tectonically quiescent.
-
Volumes & issues
-
Volume 36 (2024)
-
Volume 35 (2023)
-
Volume 34 (2022)
-
Volume 33 (2021)
-
Volume 32 (2020)
-
Volume 31 (2019)
-
Volume 30 (2018)
-
Volume 29 (2017)
-
Volume 28 (2016)
-
Volume 27 (2015)
-
Volume 26 (2014)
-
Volume 25 (2013)
-
Volume 24 (2012)
-
Volume 23 (2011)
-
Volume 22 (2010)
-
Volume 21 (2009)
-
Volume 20 (2008)
-
Volume 19 (2007)
-
Volume 18 (2006)
-
Volume 17 (2005)
-
Volume 16 (2004)
-
Volume 15 (2003)
-
Volume 14 (2002)
-
Volume 13 (2001)
-
Volume 12 (2000)
-
Volume 11 (1999)
-
Volume 10 (1998)
-
Volume 9 (1997)
-
Volume 8 (1996)
-
Volume 7 (1994)
-
Volume 6 (1994)
-
Volume 5 (1993)
-
Volume 4 (1992)
-
Volume 3 (1991)
-
Volume 2 (1989)
-
Volume 1 (1988)